Chapter
800
DEPOSIT
FOR REGISTRATION
Outline
of Topics
801
Applicability of this chapter.
802
Statutory provisions.
803
Quantity and content of material deposited: in general.
804
Unpublished works.
804.01
Unpublished works: the meaning of "complete."
804.02
Unpublished works: nature of copy.
805
Published works.
805.01
Published works: number of copies or phonorecords.
805.02
Published works: the meaning of "complete."
805.03
The meaning of "best edition."
806
Quantity and content of material deposited: special
situations.
806.01
Works reproduced in or on three-dimensional objects.
806.02
Oversize copies.
806.03
Holograms.
806.04
Unpublished pictorial or graphic works.
806.05
pictorial or graphic works published in certain
limited
editions.
806.06
Published commercial prints or labels.
806.07
Published tests and answer material.
806.08
Secure tests.
806.09
pictorial or graphic works reproduced in or on
sheetlike
materials.
806.10
pictorial or graphic works reproduced on sheet-
like
materials published only in or on three-
dimensional
objects.
806.11
Separate registration for work embodied only in
a
motion picture sound track.
806.12
Machine-readable works.
806.13
Motion pictures.
-1
-
[1984]
Chapter
800
DEPOSIT
FOR REGISTRATION
Outline
of Topics -2 –
807
Motion picture Agreement.
807.01
Who may enter into the Agreement.
807.02
Who may sign the Agreement.
807.03
Return of deposit copy under the Agreement.
807.04
Recall of the deposit copy under the Agreement.
807.05
Quality of copy deposited under the Agreement.
807.06
Supplemental property Agreement.
807.07
Termination of the Motion picture Agreement.
808
Special relief from the deposit requirements for
registration.
808.01
Special relief: in general.
808.02
Special relief: criteria.
808.03
Special relief: procedures.
808.04
Special relief: continuous or ongoing grants.
809
Relationship of deposit for registration to mandatory
deposit
under 17 U.S.C. 407.
810
Appendix.
[1984]
Chapter
800
DEPOSIT
FOR REGISTRATION
801
Applicability of this chapter. The provisions of
this
chapter are applicable to works for which an
application
for copyright registration is made on
or
after January 1, 1978.
802
Statutory provisions. At any time during the sub-
sistence
of copyright in any published or unpub-
lished
work, the owner of copyright or of any
exclusive
right in the work may apply for regis-
tration
of the copyright claim by delivering to
the
Copyright Office the application and fee
specified
by sections 409 and 708 of the copyright
law
(see Chapter 700: APPLICATIONS AND FEES),
along
with the deposit specified in section 408 of
the
copyright law and explained in this chapter.
See
17 U.S.C. 408(a). Except as modified by the
copyright
Office Regulations adopted pursuant to
the
provisions of 17 U.S.C. 408{c), the deposit
for
registration shall consist of:
1)
For an unpublished work, one complete copy or
phonorecord;
2)
For a work first published in the United States
before
January I, 1978, two complete copies or
phonorecords
of the work as first published;
3)
For a work first published in the United States
on
or after January I, 1978, two complete copies
or
phonorecords of the best edition;
4)
For a work first published outside the united
States,
one complete copy or phonorecord as so
Published;
5)
For a contribution to a collective work, one
complete
copy or phonorecord of the best edition
of
the collective work.
See
17 U.S.C. 408(b).
800-1
[1984]
800-2
802
Statutory provisions. (cont'd)
NOTE:
The Register of Copyrights is authorized by
the
law to specify by regulation the administrative
classes
into which works are to be placed for pur-
poses
of deposit and registration and the nature of
the
copies or phonorecords to be deposited in the
various
classes specified. The regulations may
require
or permit the deposit of identifying material
instead
of copies or phonorecords, the deposit of
only
one copy or phonorecord where two would normally
be
required, or a single registration and an atten-
dant
deposit for a group of related works. See 17
U.S.C.
408(c)(1). The Register is directed by the
law
to establish regulations specifically permitting,
under
certain conditions, a single registration for
a
group of contributions to periodicals by the same
author
published within a twelve-month period. See
17
U.S.C. 408(c)(2).
803
Quantity and content of material deposited: in gen-
eral.
The statute authorizes the Register of Copy-
rights
to specify by regulation the quantity and
content
of the material to be deposited. The regu-
lations
lessen the requirements in many cases by
reducing
the necessary deposit for published works
from
two copies or phonorecords to one, by permitting
the
deposit of identifying material instead of a copy
or
phonorecord, and by providing for specially
tailored
relief from the deposit requirements in
cases
of unnecessary hardship or in unusual circum-
stances,
through the mechanism of "special relief."
These
regulations also require, in some cases, the
deposit
of identifying material instead of the
copy
or phonorecord otherwise required. Exceptions
to
the basic deposit requirements are explained in
detail
in sections 804 through 806 below.
803
Quantity and content of material deposited: in general. The statute requires
for
unpublished
works that one copy or phonorecord be
deposited,
and that the single copy or phonorecord
be
"complete." See 17 U.S.C. 408(b)(1).
804.01
Unpublished works: the meaning of "complete."
Generally,
the requirement that an unpublished
copy
or phonorecord be "complete" means that
[1984]
800-3
804
Unpublished works. (cont’d)
804.01
Unpublished works: the meaning of "complete."
(cont'd)
it
must embody the entire copyrightable content
of
the work for which registration is sought.
See
37 C.F.R. 202.20(b)(2)(i). For unpublished
motion
pictures, the deposit regulations give the
term
"complete" a special meaning as set forth in
section
806.13(a) below.
804.02
Unpublished works: nature of copy. The
general
rule that only one complete copy is
required
is modified for certain types of
works.
For some works, identifying material
mayor
must be substituted for the actual copy
required.
In other cases, additional material
must
accompany the single copy deposited. The
special
requirements for each specific type of
work
are explained later in this chapter, at
the
sections cited below.
804.02(a)
Identifying material. If the following are
unpublished,
identifying material mayor must
be
submitted:
1)
Certain pictorial and graphic works
(see
sections 806.04 and 806.05
below);
2)
Machine-readable works such as com-
puter
programs and data bases (see
section
806.12 below);
3)
Works on sheetlike materials (see
sections
806.09 and 806.10 below):
4)
Three-dimensional works (see section
806.01
below);
5)
Works as embodied in a motion picture
sound
track (see section 806.11 below);
6)
Oversize copies of any type (see sec-
tion
806.02 below);
7)
Motion pictures (see sections 804.02(b)
and
806.13(a) below).
[1984]
800-4
804
Unpublished works. (cont'd)
804.02
Unpublished works: nature of copy. (cont'd)
804.02(b)
Additional material. The following are
unpublished
works for which the deposit of
a
single copy must be accompanied by addi-
tional
material of some kind:
I)
Motion pictures (see section 806.13
below);
2)
Holograms (see section 806.03 below).
805
Published works. Three general requirements apply
to
the deposit of works first published in the United
States:
(I) two copies or phonorecords must be
deposited:
(2) the copies or phonorecords must be
"complete":
and (3) the copies or phonorecords
must
be the "best edition" of the work, as defined
by
the statute. See 17 U.S.C. 408(b)(2).
805.01
Published works: number of copies or phono-
records.
Although two copies or phonorecords
are
generally required for registration of
published
works, the statute empowers the
Register
of Copyrights to specify that the
deposit
shall be one copy or phonorecord for
particular
types of works. See 17 U.S.C.
408(c)(I).
The deposit regulations (37 C.F.R.
202.20(c)(2)(iª
state that the deposit of
only
one copy or phonorecord will suffice in
lieu
of two copies or phonorecords for certain
works:
1)
Published three-dimensional cartographic
representations
of area, such as globes
and
relief models;
2)
Published diagrams illustrating scientific
or
technical works or formulating scien-
tific
or technical information in linear
or
other two-dimensional form, such as an
architectural
or engineering blueprint, or
a
mechanical drawing;
3)
Published greeting cards, picture postcards,
and
stationery;
[1984]
800-5
805
Published works. (cont'd)
805.01
Published number of copies or phono-
records.
4)
Lectures, sermons, speeches, and addresses
published
individually, and not as a col-
lection
of the works of one or more authors;
5)
Published contributions to a collective
work;
6)
Musical compositions published in copies
only
or in both copies and phonorecords,
if
the only publication of copies took
place
by rental, lease, or lending;
7)
Published multimedia kits which are pre-
pared
for use in systematic instructional
activities
and which include literary
works,
audiovisual works, sound record-
ings,
or any combination of such works;
8)
Works consisting of multiple parts that are
packaged
and published in a flat-sided box or
similar
container, of no more than 12 by 24
by
6 inches, and that include among the copy-
rightable
elements of the work, in addition
to
any copyrightable element on the box or
other
container, three or more three-dimen-
sional,
physically separable parts. See 37
C.F.R.
202.20(c)(2)(i)(H), 37 C.F.R. 202.20
(c)(2)(ix)(B)(5),
and section 806.01(a)(4)
below
and
9)
Motion pictures.
805.02
Published works: the meaning of “complete”.
In
general, the requirement that published
copies
or phonorecords be "complete" means
that
they should be physically undamaged and
include
all elements of the applicable unit
of
publication of the work, including elements
that,
if considered separately, would not be
copyrightable
subject matter. See 37 C.F.R.
202.20(b)(2)(ii).
[1984]
800-6
Published
works. (cont'd)
805.02
Published works: the meaning of "complete".
(cont'd)
805.02(a)
Complete copies: missing parts. Where
certain
physically separable elements are
missing
from the deposit, a copy or phono-
record
will still be accepted as a complete
copy,
if:
1)
All the parts of the work for which
registration
is sought are present; and
2)
The removal of the missing elements did
not
physically damage the copy or phono-
record
or garble its contents; and
3)
The work is exempt from mandatory deposit
under
section 407 of the copyright law
(see
17 U.S.C. 407, and 37 C.F.R. 202.19
(c))
or the copy deposited consists entirely
of
a container, wrapper, or holder which
is
exempt from the identifying material
requirements
because it can be stored
flat.
See section 806.01 (a) below.
805.02(b)
Complete copies: special situations. In
particular
situations, the deposit regula-
tions
give a special definition of the word
"complete"
when it applies to certain pub-
lished
works.
805.02(b)(I)
Contributions to collective works. A
complete
copy or phonorecord of a pub-
lished
contribution to a collective work
is
either the entire collective work, in-
cluding
the contribution or, if the col-
lective
work is a newspaper, the entire
section
of the paper which includes the
contribution.
See 37 C.F.R. 202.20(b)
(2)(iii).
[1984]
800-7
805
Published works. (cont'd)
805.02
Published works: the meaning of "complete."
(cont'd)
805.02(b)
Complete copies: special situations.
(cont'd)
805.02(b)(2)
Published sound recordings. In the case
of
a published sound recording, a com-
plete
phonorecord includes the phono-
record
and any visually perceptible
material
which is published with it, such
as
text or pictorial matter on album
covers
on record sleeves, or leaflets or
booklets
included in an album. See 37
C.F.R.202.20(b)(2)(iv).
Example:
A
phonorecord is published with an
album
cover, a sleeve with text, and
a
poster picturing the performing
artist.
The complete deposit of the
sound
recording is the phonorecord
plus
all the additional material
described
above as the unit of
publication.
805.02(b)(3)
Music published only by rental lease, or
lending.
In the case of a musical compo-
sition
published in copies only, or in
both
copies and phonorecords, if the only
publication
of copies took place by the
rental,
lease, or lending of a full score
and
parts, a full score is a complete
copy;
and if the only publication of
copies
took place by the rental, lease,
or
lending of a conductor's score and
parts,
a conductor's score is a complete
copy.
See 37 C.F.R. 202.20(b)(2)(v).
805.02(b)(4)
Motion pictures. A special definition of
"complete"
applies to published motion
pictures.
A copy of a motion picture is
complete
if:
[1984]
800-8
Published
works. (cont'd)
805.02
Published works: the meaning of "complete."
(cont'd)
805.02(b)
Complete copies: special situations.
(cont'd)
805.02(b)(4)
Motion pictures. (cont'd)
--
the reproduction of all of the visual
and
aural elements constituting the
copyrightable
subject matter in the
work
is clean, undamaged, undeterio-
rated,
and free of splices, and
--
the copy itself and its physical
housing
are free of any defects that
would
interfere with the performance
of
the work or that would cause me-
chanical,
visual, or audible defects
or
distortions. See section 806.13
below.
805.03
The meaning of "best edition." The copyright
law
generally requires that a deposit of a
published
work be the "best edition" of the work.
See
17 U.S.C. 408(b)(2) .The "best edition" of a
published
work is "the edition, published in the
United
States at any time before the date of
deposit,
that the Library of Congress determines
to
be most suitable for its purposes." See 17
U.S.C.
101.
805.03(a)
Library of Congress statement of policy. The
Library
of Congress has published a policy
statement
entitled "Best Edition of Published
Copyrighted
Works for the Collections of the
Library
of Congress" (referred to hereinafter
as
the "Best Edition Statement" or the
"Statement").
This policy statement is not a
part
of the copyright statute, nor is it a
Copyright
Office regulation. It expresses,
by
listing the criteria for choosing among
several
editions of a work, part of the
current
acquisitions policies of the Library
of
Congress with respect to certain works.
[1984]
800-9
805
Published works. (cont'd)
805.03
The meaning of "best edition." (cont'd)
805.03(a)
Library of Congress statement of policy.
(cont'd)
Examples:
1)
In 1978, a copyright owner publishes a
novel
in both paperback and hardback
editions.
There was no difference in the
content
of the book between the paperback
and
the hardback. The Best Edition State-
ment
was used to choose between the two.
According
to the criteria listed in the
Best
Edition Statement, the hardback was
determined
to be the best edition.
2)
In 1980, a copyright owner published an
architectural
treatise on ordinary paper
and
on archival quality paper. According
to
the criteria specified in the Best
Edition
Statement, the archival quality
paper
was chosen as the best edition.
NOTE:
The text of the "Best Edition of pub-
lished
Copyrighted Works for the Collections
of
the Library of Congress" may be found in
the
Appendix to this chapter.
805.03(b)
If no specific criteria in Best Edition
Statement.
Where no specific criteria for
selection
of the best edition are included
in
the Best Edition statement for a given
work,
and where the Copyright Office is aware
that
two or more editions of a work have been
published,
the Office will consult with appro-
priate
officials in the Library of Congress.
Example:
Where
an audiovisual work was published
in
two editions, one on a filmstrip and
the
other as a set of slides, the Office
will
consult with appropriate officials
in
the Library of Congress, since this
situation
is not covered in the Best
Edition
Statement.
[1984]
800-10
805
Published works. (cont'd)
805.03
The meaning of "best edition." (cont'd)
805.03(c)
Difference in copyrightable content. Where
there
is a difference in copyrightable con-
tent
between two or more editions of a work,
each
edition which contains new copyrightable
authorship
is subject to separate deposit and
registration.
Consequently, the Best Edition
Statement,
based on such differences, does
not
apply.
Example:
In
1978, a copyright owner published a
novel
in hardback without annotations,
and
later published the novel in hardback
with
extensive annotations. In this
case,
new copyrightable matter was added
to
the second book. Thus, the second
book
is considered a separate work for
purposes
of deposit and registration, and
therefore
the Best Edition Statement,
based
on such differences, does not
apply.
805.03(d)
Exceptions to the requirement of the best
edition.
There are two important exceptions
to
the general requirements of the best edi-
tion
explained above. These exceptions are
for
works first published before January 1,
1978,
but submitted for registration after
that
date, and works first published outside
the
United States, whenever published.
805.03(d)(1)
A work first published in the United
States
before January 1, 1978. Generally
the
required deposit-for any work which
was
first published in the United States
before
January 1, 1978, is two complete
copies
or phonorecords of the work as
first
published. See 37 C.F.R. 202:20
(c)(l)(ii).
[1984]
800-11
805
Published works. (cont'd)
805.03
The meaning of "best edition." (cont'd)
805.03(d)
Exceptions to the requirement of the best
edition.
(cont'd)
805.03(d)(2)
A work first published outside the United
States
at any time. Generally, the re-
quired
deposit for works first published
outside
the United States, whenever pub-
lished,
is one complete copy or phono-
record
of the work as first published.
See
37 C.F.R. 202.20(c)(1)(iv).
805.03(d)(3)
Works first published simultaneously
within
and outside the United States. If
a
work was first published simultaneously
within
and outside the United States, it
is
considered, for the purposes of this
section,
to have been first published in
the
United States. See 37 C.F.R. 202.20
(c)(l)(iv).
NOTE:
"First published simultaneously,"
for
this purpose, means first published
on
the same date.
806
Quantity and content of material deposited: special
situations.
The following are special situations
with
respect to the quantity and content of material
deposited
for registration.
806.01
Works reproduced in or on three-dimensional
objects.
In the case of works reproduced in or on
three-dimensional
objects, identifying material
is
required as a deposit.
806.01(a)
Works reproduced in or on three-dimensional
objects:
when this modification applies.
Identifying
material must be submitted
instead
of a copy or copies when the deposit
would
ordinarily be a three-dimensional
sculptural
work. Examples are statues,
carvings,
ceramics, and models. This
requirement
applies to both unpublished and
published
works. Subject to the exceptions
[1984]
800-12
806
Quantity and content of material deposited: special
situations.
(cont'd)
806.01
Works reproduced in or on three-dimensional
objects.
(cont'd)
806.01(a)
Works reproduced in or on three-dimensional
objects:
when this modification applies.
(cont'd)
below,
the requirement also applies to any
two-dimensional
or three-dimensional work
which
has been fixed (if unpublished) or
published
only in the form of jewelry, toys,
dolls,
games, or any three-dimensional useful
articles.
See 37 C.F.R. 202.20(c)(2)(ix)(A).
NOTE:
The following are exceptions to the
general
requirements of submitting identi-
fying
material instead of an actual copy or
copies:
1)
Works that are reproduced by intaglio or
4relief
printing methods on two-dimen-
sional
materials such as paper or fabrics.
2)
Three-dimensional cartographic represen-
tations
of area, such as globes and
relief
models. In the case of a globe,
one
actual copy of the three-dimensional
globe,
and the stand or any material pub-
lished
with it, is the complete deposit.
3)
Works that have been fixed or published
in
or on a useful article which is one of
the
elements of the unit of publication
of
a multimedia kit (an educational or
instructional
kit which also includes a
literary
or audiovisual work, a sound
recording,
or any combination of such
works).
See 37 C.F.R. 202.20(c)(ix)
(B)(3).
4)
Works consisting of multiple parts that
are
packaged and published in a flat-
sided
box or similar container, of no
more
than 12 by 24 by 6 inches, and that
[1984]
800-13
806
Quantity and content of material deposited: special
situations.
(cont'd)
806.01
Works reproduced in or on three-dimensional
objects.
(cont'd)
806.01(a)
Works reproduced in or on three-dimensional
objects:
when this modification applies.
(cont'd)
NOTE:
(cont'd)
4)
(cont'd)
include
among the copyrightable elements
of
the work, in addition to any copy-
rightable
element on the box or other
container,
three or more three-dimen-
sional,
physically separable parts.
5)
Works reproduced on three-dimensional
containers
which are capable of flat
storage
and which, when opened, slit, or
folded,
do not exceed 96 inches in any
dimension.
The container must be capable
of
being flattened in such a way that the
copyrightable
material on the container
is
not damaged.
806.01(b)
Works reproduced in or on three-dimensional
objects:
what must be deposited. When
identifying
material is required, it must
comply
with the specifications below. See 37
C.F.R.
202.21.
806.01(b)(1)
Type of material. Identifying material
consists
of a two-dimensional reproduc-
tion
or rendering of the work in some
form
which is visually perceivable with-
out
the aid of a machine or device. The
identifying
material may consist of photo-
graphic
prints, transparencies, photo-
copies,
drawings, or a similar rendering
of
the work.
[1984]
800-14
806
Quantity and content of material deposited: special 4
situations.
(cont'd)
806.01
Works reproduced in or on three-dimensional
objects.
(cont'd)
806.01(b)
Works reproduced in or on three-dimensional
objects:
what must be deposited. cont'd
806.01(b)(2)
Number of pieces. One set, of as many
pieces
as are necessary to show clearly
the
entire copyrightable content of the
work
for which registration is sought, is
required.
806.01(b)(3)
Content of pieces.
*
Copyrightable content. The identi-
fying
material must clearly show the
entire
copyrightable content of the
work
for which registration is sought.
*
Copyright notice. In the case of
works
published with notice of copy-
4right,
the notice and its position on
the
work must be clearly shown on at
least
one piece of identifying mate-
rial.
Such piece shall show the exact
appearance
and content of the notice,
and
its specific position on the work.
Where
necessary because of the size
or
position of the notice, a separate
drawing
or similar reproduction shall
be
submitted.
*
Title and dimensions. At least one
piece
of identifying material must
indicate,
on its front, back, or
mount,
the title of the work, and an
exact
measurement of one or more
dimensions
of the work.
*
Image size. Generally, except in the
case
of photographic transparencies, the
image
of the work must be lifesize or
larger.
However, if less than lifesize,
the
image must be large enough to show
clearly
the entire copyrightable con-
tent
of the work.
[1984]
800-15
806
Quantity and content of material deposited: special
situations.
(cont'd)
806.01
Works reproduced in or on three-dimensional
objects.
(cont'd)
806.01(b)
Works reproduced in or on three-dimensional
objects:
what must be deposited. (cont'd)
806.01(b)(3)
Content of pieces. (cont'd)
*
Color. Generally, the identifying
material
may be in black and white or
may
consist of a reproduction of the
actual
colors of the work. However,
if
the work reproduced in or on the
three-dimensional
object is pictorial
or
graphic, the identifying material
must
reproduce the actual colors
employed
in the work.
806.01(b)(4)
Size of pieces.
*
Uniform size. All pieces, except
separate
drawings or similar repro-
ductions
of the copyright notice, must
be
of uniform size.
*
Photographic transparencies. Photo-
graphic
transparencies must be at least
35mm
in size, and if 3 by 3 inches or
less,
they must be mounted in card-
board,
plastic, or similar mounts to
facilitate
identification, handling,
and
storage. If the transparencies
are
larger than 3 by 3 inches, the
Copyright
Office prefers that they be
mounted
for easy handling, and may
require
such mounting in particular
cases.
*
All pieces except photographic trans-
parencies.
The preferred size for all
pieces
except photographic transpar-
encies
is 8 by 10 inches, but in no
case
may a piece be smaller than 3 by
3
inches or larger than 9 by 12 inches.
[1984]
800-16
806
Quantity and content of material deposited: special
situations.
(cont'd)
806.02
Oversize copies. In the case of any copy which
is
oversize, identifying material is required as
a
deposit.
806.02(a)
Oversize copies: when this requirement applies.
Identifying
material must be submitted in lieu
of
an actual copy or copies whenever any
single
dimension of a deposit otherwise
required
under the regulations is larger than
96
inches. See 37 C.F.R. 202.20(c)(2)(ix).
806.02(b)
Oversize copies: what must be deposited.
When
identifying material is required, it
must
comply with the specifications below.
See
37 C.F.R. 202.21.
806.02(b)(1)
Type of material. Identifying material
consists
of a two-dimensional reproduction
or
rendering of the work in some form which
is
visually perceived without the aid of
a
machine or device. The identifying
material
may consist of photographic
prints,
transparencies, photocopies,
drawings,
or a similar rendering of the
work.
806.02(b)(2)
Number of pieces. One set, of as many
pieces
as are necessary to show clearly
the
entire copyrightable content of the
work
for which registration is sought, is
required.
806.02(b)(3)
Content of pieces.
*
Copyrightable content. The identi-
fying
material must clearly show the
entire
copyrightable content of the
work
for which registration is sought.
*
Copyright notice. In the case of works
published
with notice of copyright, the
notice
and its position on the work must
be
clearly shown on at least one piece
of
identifying material. Such piece
(1984]
800-17
806
Quantity of material deposited: special
situations.
(cont’d)
806.02
Oversize copies. (cont'd)
806.02(b)
Oversize copies: what must be deposited.
(cont'd)
806.02(b)(3)
Content of pieces. (cont'd)
*
Copyright notice. (cont'd)
shall
show the exact appearance and con-
tent
of the notice, and its specific
position
on the work. Where necessary
because
of the size or position of the
notice,
a separate drawing or similar
reproduction
shall be submitted.
*
Title and dimension. At least one
piece
of identifying material must
indicate,
on its front, back, or mount,
the
title of the work, and an exact
measurement
of one or more dimensions
of
the work.
*
Image size. Generally, except in the
case
of photographic transparencies, the
image
of the work must be lifesize or
larger.
However, if less than life-
size,
the image must be large enough
to
show clearly the entire copyright-
able
content of the work.
*
Color. Generally, the identifying
material
may be in black and white or
may
consist of a reproduction of the
actual
colors of the work. However,
if
the work reproduced in or on the
three-dimensional
object is pictorial
or
graphic, the identifying material
must
reproduce the actual colors
employed
in the work.
[1984]
800-18
806
Quantity of material deposited: special
situations.
(cont’d)
806.02
Oversize copies.
806.02(b)
Oversize copies: what must be deposited.
(cont'd)
806.02(b)(4)
Size of pieces.
*
Uniform size. All pieces, except
separate
drawings or similar repro-
ductions
of the copyright notice, must
be
of uniform size.
*
Photographic transparencies. Photo-
graphic
transparencies must be at
least
35mm in size. If the trans-
parencies
are 3 by 3 inches or less,
they
must be mounted in a way that
makes
them easy to handle and pre-
serve
and the Copyright Office may
require
such mounting in particular .
cases.
*
All pieces except photographic trans-
parencies.
The preferred size for all.
pieces
except photographic transpar-
encies
is 8 by 10 inches, but in no
case
may a piece be smaller than 3 by
3
inches or larger than 9 by 12 inches.
806.03
Holograms. In the case of any work deposited
in
the form of a hologram, identifying material
which
complies with the specifications below must
be
submitted with the required copy or copies of
the
hologram. See 37 C.F.R. 202.20(c)(2)(iii).
806.03(a)
Holograms: when this modification applies. This requirement applies to both
unpublished and published holograms.
[1984]
800-19
806
Quantity of material deposited: special
situations.
(cont’d)
806.
03 Holograms. (cont’d)
806.03(b)
Holograms: what must be deposited. In addi-
tion
to the copy or copies required to be
deposited
for registration, there shall also
be
deposited for each such copy one set of
additional
items. The sets shall consist of
the
following: (1) precise instructions for
displaying
the image fixed in the hologram:
and
(2) identifying material which clearly
shows
the displayed image and complies with
the
requirements set forth below.
806.03(b)(1)
Type of material. Identifying material
consists
of a two-dimensional reproduction
or
rendering of the work in some form which
is
visually perceivable without the aid
of
a machine or device. The identifying
material
may consist of photographic
prints,
transparencies, photocopies,
drawings,
or a similar rendering of the
work.
806.03(b)(2)
Number of pieces. As many pieces as are
necessary
to show clearly the displayed
image
are required.
806.03(b)(3)
Content of pieces.
*
Copyrightable content. The identi-
fying
material must clearly show the
displayed
image.
*
Copyright notice. In the case of
holograms
published with notice of
copyright,
the notice and its position
on
the hologram must be clearly shown
on
at least one piece of identifying
material.
Such piece shall show the
exact
appearance and content of the
notice
on the hologram, and its
specific
position on the hologram.
[1984]
800-20
806
Quantity and content of material deposited: special
situations.
(cont'd)
806.03
Holograms. (cont'd)
806.03(b)
Holograms: what must be deposited. (cont'd)
806.03(b)(3)
Content of pieces. (cont'd)
*
Copyright notice. (cont'd)
Where
necessary because of the size or
position
of the notice, a separate
drawing
or similar reproduction shall
be
submitted.
*
Title. At least one piece of identi-
fying
material must indicate, on its
front,
back, or mount, the title of
the
work.
*
Image size. The identifying material
must
be large enough to show clearly
the
displayed image.
806.03(b)(4)
Size of pieces.
*
Uniform size. All pieces must be of
uniform
size.
*
Photographic transparencies. Photo-
graphic
transparencies must be at
least
35mm in size. If the trans-
parencies
are 3 by 3 inches or less,
they
must be mounted a way that
makes
them easy to handle and pre-
serve;
and the Copyright Office may
require
such mounting in particular
cases.
*
All pieces except photographic trans-
parencies.
The preferred size for all
pieces
except photographic transparen-
cies
is 8 by 10 inches, but in no case
may
a piece be smaller than 3 by 3
inches
or larger than 9 by 12 inches.
[1984]
800-21
806
Quantity and content of material deposited: special
situations.
(cont'd)
806.04
Unpublished pictorial or graphic works. Identi-
fying
material may be deposited instead of an
actual
copy for all unpublished pictorial or
graphic
works.
806.04(a)
Unpublished pictorial or graphic works: when
this
modification applies: This provision
applies
to all unpublished pictorial or
graphic
works.
806.04(b)
Unpublished pictorial or graphic works: what
must
be deposited. Identifying material for
unpublished
works is material which complies
with
the specifications given below.
806.04(b)(1)
Type of material. Identifying material
consists
of a two-dimensional reproduction
or
rendering of the work in some form
which
is visually perceivable without the
aid
of a machine or device. The identi-
fying
material may consist of photo-
graphic
prints, transparencies, photo-
copies,
drawings, or a similar rendering
of
the work.
806.04(b)(2)
Number of pieces. One set, of as many
pieces
as are necessary to show clearly
the
entire copyrightable content of the
work
for which registration is sought, is
required.
806.04(b)(3)
Content of pieces.
*
Copyrightable content. The identi-
fying
material must clearly show the
entire
copyrightable content of the
work
for which registration is sought.
*
Title and dimensions. At least one
piece
of identifying material must
indicate,
on its front, back, or mount,
the
title of the work, and an exact
measurement
of one or more dimensions
of
the work.
[1984]
800-22
806
Quantity and content of material deposited: special
situations.
(cont'd)
806.04
Unpublished pictorial or graphic works. (cont'd)
806.04(b)
Unpublished pictorial or graphic works: what
must
be deposited. (cont'd)
806.04(b)(3)
Content of pieces. (cont'd)
*
Image size. Generally, except in the
case
of photographic transparencies,
the
image of the work must be lifesize
or
larger. However, if less than
lifesize,
the image must be large
enough
to show clearly the entire
copyrightable
content of the work.
*
Color. The identifying material must
reproduce
the actual colors employed
in
the work.
806.04(b)(4)
Size of pieces.
*
Uniform size. All pieces except sepa-
rate
drawings or similar reproductions
of
the copyright notice, if any, must
be
of uniform size.
*
Photographic transparencies. Photo-
graphic
transparencies must be at
least
35rnm in size. If the transpar-
encies
are 3 by 3 inches or less, they
must
be mounted in a way that makes
them
easy to handle and preserve: and
the
Copyright Office may require such
mounting
in particular cases.
*
All pieces except photographic trans-
parencies.
The preferred size for all
pieces
except photographic transpar-
encies
is 8 by 10 inches, but in no
case
may a piece be smaller than 3 by
3
inches or larger than 9 by 12 inches.
[1984]
800-23
806
Quantity and content of material deposited: special
situations.
(cont'd)
806.05
pictorial or graphic works published in certain
limited
editions: The deposit of either one-
complete
copy of the work or identifying material
complying
with the specifications given below may
be
made in the case of pictorial or graphic
works
published in certain limited editions. See
37
C.F.R. 202.20(c)(2)(iv).
806.05(a)
pictorial or graphic works published in
certain
limited editions: when this modifi-
cation
applies. This modification applies-to
published
pictorial or graphic works only if
the
individual author is the owner of copy-
right
in the work, and either: (1) less than
five
copies of the work have been published,
or
(2) the work has been published and sold
or
offered for sale in a limited edition
consisting
of no more than 300 numbered
copies.
806.05(b)
pictorial or graphic works published in
certain
limited editions: what must be
deposited.
The applicant may deposit either
one
complete copy of the work or identifying
material
which complies with the specifica-
tions
given below. NOTE: It is not neces-
sary
that the copy deposited be one of the
numbered
copies of the limited edition.
806.05(b)(1)
Type of material. Identifying material
consists
of a two-dimensional reproduc-
tion
or rendering of the work in some
form
which is visually perceivable with-
out
the aid of a machine or device. The
identifying
material may consist of
photographic
prints, transparencies,
photocopies,
drawings, or a similar
rendering
of the work.
806.05(b)(2)
Number of pieces. One set, of as many
pieces
as are necessary to show clearly
the
entire copyrightable content of the
work
for which registration is sought, is
required.
[1984]
800-24
806
Quantity and content of material deposited: special
situations.
(cont'd)
806.05
pictorial or graphic works published in certain
limited
editions. (cont'd)
806.05(b)
pictorial or graphic works published in
certain
limited editions: what must be
deposited.
(cont'd)
806.05(b)(3)
Content of pieces.
*
Copyrightable content. The identi-
fying
material must clearly show the
entire
copyrightable content of the
work
for which registration is sought.
*
Copyright notice. In the case of
works
published with notice of copy-
right,
the notice and its position on
the
work must be clearly shown on at
least
one piece of identifying mate-
rial.
Such piece shall show the exact
appearance
and content of the notice,
and
its specific position on the work.
Where
necessary because of the size
or
position of the notice, a separate
drawing
or similar reproduction shall
be
submitted.
*
Title and dimension. At least one
piece
of identifying material must
indicate,
on its front, back, or
mount,
the title of the work, and
an
exact measurement of one or more
dimensions
of the work.
*
Image size. Generally, except in the
case
of photographic transparencies,
the
image of the work must be lifesize
or
larger. However, if less than
lifesize,
the image must be large
enough
to show clearly the entire
copyrightable
content of the work.
*
Color. The identifying material must
reproduce
the actual colors employed
in
the work.
[1984]
800-25
806
Quantity of material deposited: special
situations.
(cont’d)
806.05
pictorial or graphic works published in certain
limited
editions. (cont'd)
806.05(b)
pictorial or graphic works published in
certain
limited editions: what must be
deposited.
(cont'd)
806.05(b)(4)
Size of pieces.
*
Uniform size. All pieces except sepa-
rate
drawings or similar reproductions
of
the copyright notice must be of
uniform
size.
*
Photographic transparencies. Photo-
graphic
transparencies must be at
least
35mm in size. If the transpar-
encies
are 3 by 3 inches or less, they
must
be mounted in a way that makes
them
easy to handle and preserve; and
the
Copyright Office may require such
mounting
in particular cases.
*
All pieces except photographic trans-
parencies.
The-preferred size for all
pieces
except photographic transparen-
cies
is 8 by 10 inches, but in no case
may
a piece be smaller than 3 by 3
inches
or larger than 9 by 12 inches.
806.06
Published commercial prints or labels. Gen-
erally,
in the case of prints, labels, and other
advertising
matter published in connection with
the
rental, lease, lending, licensing, or sale of
articles
of merchandise, works of authorship, or
services,
the deposit of one complete copy of the
work
will suffice. There are two exceptions to
this
general rule set forth below. See 37 C.F.R.
202.20(c)(2)(v).
806.06(a)
Commercial prints or labels published in a
larger
work. In the case of a print or label
published
in a larger work, such as a news-
paper
or other periodical, one copy of the
entire
page or pages upon which it appears
may
be submitted in lieu of the entire larger
work.
[1984]
800-26
806
Quantity of material deposited: special situations. (cont’d)
806.06
Published commercial prints or labels. (cont'd)
806.06(a)
Commercial prints or labels published in a
larger
work. (cont'd)
Example:
A
soap company has published a half-page
advertisement
in a newspaper, and submits
an
application, fee, and the entire page
on
which the advertisement appears, taken
from
the newspaper. The deposit is
acceptable.
806.06(b)
Commercial print or labels that are physi-
cally
inseparable from a three-dimensional
object.
In the case of a print or label
which
is physically inseparable from a
three-dimensional
object, identifying mate-
rial
which complies with the following
specifications
must be submitted rather than
4an
actual copy unless the work is reproduced
on
three-dimensional containers which are
capable
of flat storage, and when opened,
slit,
or folded, do not exceed 96 inches in
any
dimension. In a case of this kind, the
container
must be capable of being flattened
in
such a way that the copyrightable matter
on
the container is not damaged. See 37
C.F.R.
202.20(c)(ix)(B)(6).
806.06(b)(1)
Type of material. Identifying material
consists
of a two-dimensional reproduc-
tion
or rendering of the work in some
form
which is visually perceivable with-
out
the aid of a machine or device. The
identifying
material may consist of
photographic
prints, transparencies,
photocopies,
drawings, or a similar
rendering
of the work.
806.06(b)(2)
Number of pieces. One set, of as many
pieces
as are necessary to show clearly
the
entire copyrightable content of the
work
for which registration is sought, is
required.
[1984]
800-27
806
Quantity and content of material deposited: special
situation.
(cont'd)
806.06
Published commercial prints or labels. (cont'd)
806.06(b)
Commercial prints or labels that are physically inseparable from a
three-dimensional object. (cont’d)
806.06(b)(3)
Content of pieces.
*
Copyrightable content. The identi-
fying
material must clearly show the
entire
copyrightable content of the
work
for which registration is sought.
*
Copyright notice. In the case of
works
published with notice of copy-
right,
the notice and its position on
the
work must be clearly shown on at
least
one piece of identifying mate-
rial.
Such piece shall show the exact
appearance
and content of the notice,
and
its specific position on the work.
Where
necessary because of the size
or
position of the notice, a separate
drawing
or similar reproduction shall
be
submitted.
*
Title and dimension. At least one
piece
of identifying material must
indicate,
on its front, back, or
mount,
the title of the work, and
an
exact measurement of one or more
dimensions
of the work.
*
Image size. Generally, except in the
case
of photographic transparencies,
the
image of the work must be lifesize
or
larger. However, if less than
lifesize,
the image must be large
enough
to show clearly the entire
copyrightable
content of the work.
*
Color. Generally, the identifying
material
may be in black and white or
may
consist of a reproduction of the
actual
colors of the work. However,
[1984]
800-28
806
Quantity and content of material deposited: special
situations.
(cont'd)
806.06
Published commercial prints or labels. (cont'd)
806.06(b)
Commercial prints or labels that are physi-
cally
inseparable from a three-dimensional
object.
(cont'd)
806.06(b)(3)
Content of pieces. (cont'd)
*
Color. (cont'd)
if
the work reproduced in or on the
three-dimensional
object contains any
pictorial
or graphic matter, the iden-
tifying
material must reproduce the
actual
colors employed in the work.
806.06(b)(4)
Size of pieces.
*
Uniform size. All pieces except sepa-
rate
drawings or similar reproductions
of
the copyright notice must be of
uniform
size.
*
Photographic transparencies. Photo-
graphic
transparencies must be at
least
35mm in size. If the transpar-
encies
are 3 by 3 inches or less, they
must
be mounted in a way that makes
them
easy to handle and preserve; and
the
Copyright Office may require such
mounting
in particular cases.
*
All pieces except photographic trans-
parencies.
The preferred size for all
pieces
except photographic transparen-
cies
is 8 by 10 inches, but in no case
may
a piece be smaller than 3 by 3 or
larger
than 9 by 12.
806.07
Published tests and answer material. In the case
of
tests and answer material for tests which have
been
published separately from other literary
works,
one complete copy may be deposited in lieu
of
two copies. See 37 C.F.R. 202.20(c)(2)(vi).
[1984]
800-29
806
Quantity of material deposited: special situations. (cont’d)
806.08
Secure tests. A special deposit procedure is
available
for "secure tests." See 37 C.F.R.
202.20(c)(2)(vi).
806.08(a)
Secure tests: when this modification applies.
This
procedure app1ies to secure tests. A
secure
test is defined as a nonmarketed test
administered
under supervision at specified
centers
on specified dates, all copies of
which
are accounted for and either destroyed
or
returned to restricted locked storage
following
each administration. For this
purpose
a test is considered as "not marketed"
if
copies are not sold but it is distributed
and
used in such a manner that ownership and
control
of copies remain with the test spon-
sor
or publisher. See 37 C.F.R. 202.20(b)(4).
806.08(b)
Secure tests: what must be deposited. One
complete
copy of the test must be depos1ted
with
identifying material which constitutes a
sufficient
archival record of the deposit.
The
sufficiency of the identifying material
is
determined by the Copyright Office Exam-
ining
Division. The actual copy is returned
to
the applicant after examination: the
identifying
material is retained as the
archival
record of the deposit.
806.08(c)
Secure tests: special procedure. When a
secure
test is to be registered under this
special
procedure, the Head of the Literary
Section,
Examining Division, must be notified
in
advance by the applicant or authorized
representative.
The Section Head will then
arrange
for examination of the material in a
nonpublic
place with the applicant or autho-
rized
representative present. The receipt
date
will be stamped on the appropriate
material
by the examiner receiving the claim.
After
examination, the actual copies of the
test
will be returned to the applicant or
authorized
representative. The application
and
the identifying material will then pro-
ceed
through the registration process in the
usual
manner.
[1984]
800-30
806
Quantity and content of material deposited: special "
situations.
(cont'd)
806.09
pictorial or graphic works reproduced in or on
sheetlike
materials. In the case of any unpub-
lished
work that is fixed, or any published work
that
is published only in the form of a two-
dimensional
reproduction on sheetlike materials
such
as textile and other fabrics, the deposit
shall
consist of one copy in the form of an
actual
swatch or piece of such material suffi-
cient
to show all elements of the work in which
copyright
is claimed and the copyright notice, if
any,
appearing on the work. If the work consists
of
a repeated pictorial or graphic design, the
complete
design and at least part of one repeti-
tion
must be shown. Examples of such works
include
lace, embroidery, wallpaper, wrapping
paper,
carpeting, linoleum, and other floor
coverings.
See 37 C.F.R. 202.20(c)(2)(viii).
806.10
pictorial or graphic works reproduced on sheet-
like
materials published only in or on three-
dimensional
objects. Where a work is reproduced
on
sheetlike materials which have been published
only
in or on three-dimensional articles, the
deposit
must generally consist of identifying
materials
which meet the following specifications.
806.10(a)
Type of material. Identifying material con-
sists
of a two-dimensional reproduction or
rendering
of the work in some form which is
visually
perceivable without the aid of a
machine
or device. The identifying material
may
consist of photographic prints, trans-
parencies,
photocopies, drawings, or a
similar
rendering of the work.
806.10(b)
Number of pieces. One set, of as many pieces
as
are necessary to show clearly the ent1re
copyrightable
content of the work for which
registration
is sought, is required.
806.10(c)
Content of pieces.
*
Copyrightable content. The identifying
material
must clearly show the entire
copyrightable
content of the work for
which
registration is sought.
[1984]
800-31
806
Quantity and content of material deposited: special
situations.
(cont'd)
806.10
pictorial or graphic works reproduced on sheet-
like
materials published only in or on three-dimensional objects. (cont'd)
806.10(c)
content of pieces. (cont'd)
*
Copyright notice. In the case of works
published
with notice of copyright, the
notice
and its position on the work must
be
clearly shown on at least one piece of
identifying
material. Such piece shall
show
the exact appearance and content of
the
notice, and its specific position on
the
work. Where necessary because of the
size
or position of the notice, a separate
drawing
or similar reproduction shall be
submitted.
*
Title and dimensions. At least one piece
of
identifying material must indicate, on
its
front, back, or mount, the title of
the
work, and an exact measurement of one
or
more dimensions of the work.
*
Image size. Generally, except in the case
of
photographic transparencies, the image
of
the work must be lifesize or larger.
However,
if less than lifesize, the image
must
be large enough to show clearly the
entire
copyrightable content of the work.
*
Color. The identifying material must
reproduce
the actual colors employed in
the
work.
806.10(d)
Size of pieces.
*
Uniform size. All pieces except separate
drawings
or similar reproductions of the
copyright
notice must be of uniform size.
*
Photographic transparencies. Photographic
transparencies
must be at least 35mm in
size.
If the transparencies are 3 by 3
inches
or less, they must be mounted in a
[1984]
800-32
806
Quantity of material deposited: special situations. (cont’d)
806.10
pictorial or graphic works reproduced on sheet-
like
materials published only-in or on three-
dimensional
objects. (cont'd)
806.10(d)
Size of pieces. (cont’d)
*
Photographic transparencies. (cont’d)
way
that makes them easy to handle and
preserve;
and the Copyright Office may
require
such mounting in particular cases.
*
All pieces except photographic transpar-
encies.
The preferred size for all pieces
except
photographic transparencies is 8 by
10
inches, but in no case may a piece be
smaller
than 3 by 3 inches or larger than
9
by 12 inches.
NOTE:
In certain cases where the two-dimen-
sional
pictorial and graphic material is
embodied
in an article of wearing apparel or
the
like, the Copyright Office will accept as
a
deposit the actual garment, provided that
its
seams have been split and the deposit
includes
all the panels utilized in the con-
struction
of the garment.
806.11
Separate registration for work embodied only in
a
motion picture sound track. For separate regis-
tration
of an unpublished work that is fixed, or
a
published work that is published, only as
embodied
in a sound track that is an integral part
of
a motion picture, identifying material will
suffice
in lieu of an actual copy or copies of
the
motion picture. Such identifying material
shall
consist of:
1)
A transcription of the entire work, or a
reproduction
of the entire work on a phono-
record;
2)
Photographs or other reproductions from the
motion
picture showing the title of the
[1984]
800-33
806
Quantity and content of material deposited: special
situations.
(cont'd)
806.11
Separate registration for work. in
a
motion picture sound track.
2)
(cont’d)
motion
picture, the sound track credits, and
the
copyright notice, if any, for the
sound
track.
See
37 C.F.R. 202.21(f).
806.12
Machine-readable works. Where an unpublished
literary
work is fixed, or a published literary
work
is published only in the form of machine-
readable
copies (such as magnetic tapes or disks,
punch
cards, or the like) from which the work
cannot
ordinarily be perceived except with the
aid
of a machine or device, special deposit
requirements
apply. See 37 C.F.R. 202.20(c)
(2)(vii).
806.12(a)
Machine-readable works: what must be deposited. The form of deposit varies
depending
on
the type of machine-readable work sub-
mitted
for registration, but generally con-
sists
of some type of "identifying portions"
of
the work. Deposit of the entire work is
acceptable
in limited instances. In all
cases,
however, the deposit must be in a form
visually
perceptible without the aid of a
machine
or device. NOTE: Works published in
a
form requiring the use of a machine or
device
for purposes of optical enlargement
(such
as film, filmstrips, slide films, and
works
published in any variety of microform),
and
works published in visually perceptible
form
but used in connection with optical
scanning
devices, are not within this cate-
gory.
See 37 C.F.R. 202.20(c)(2)(vii)(A-B).
806.12(a)(1)
Published and unpublished computer pro-
grams.
For both published and unpub-
lished
computer programs, either one
paper
or one microform copy of the first
and
last 25 pages, or equivalent units
[1984]
800-34
806
Quantity and content of material deposited: special.
situations.
(cont'd)
806.12
Machine-readable works. (cont'd)
806.12(a)
Machine-readable works: what must be depos-
ited.
(cont'd)
806.12(a)(1)
Published and unpublished computer pro-
grams.
(cont'd)
of
the program, must be deposited. In
cases
where the work is under 50 pages or
equivalent
units in total length, the
entire
work should be deposited. If the
work
is published with a copyright
notice,
the applicant must also submit
the
page or equivalent unit which con-
tains
the copyright notice. The source
code
rather than the object code is the
best
representation of the authorship,
and
therefore should generally be depos-
ited.
See 37 C.F.R. 202.20(c)(2)(vii)(A).
806.12(a)(2)
Published and unpublished automated data
bases.
Generally, the depos1t for pub-
lished
and unpublished automated data
bases
is a paper or microform copy of the
first
and last 25 pages of the work. The
deposit
for automated data bases which
are
made up of separate and distinct data
files,
however, is either 50 complete
data
records from each file, or the
entire
file, whichever is less. "Data
file"
and "file" mean a group of data
records
pertaining to a common subject
matter,
regardless of the physical size
of
the records or the number of data
items
included in them. In the case of
revised
versions of such data bases, the
portions
deposited must contain repre-
sentative
data records which have been
added
or modified. When 50 complete data
records
from each separate file are sub-
mitted,
however, a typed or printed
descriptive
statement must be submitted
as
well. That statement must include:
[1984]
800-35
806
Quantity and content of material deposited: special
situations.
(cont'd)
806.12
Machine-readable works. (cont'd)
806.12(a)
Machine-readable works: what must be depos-
ited.
806.12(a)(2)
Published and unpublished automated data
bases.
(cont'd)
1)
The title of the data base:
2)
The claimant's name and address:
3)
The name and subject matter content
of
each separate file within the data
base,
origin of the data, and approx-
imate
number of individual records in
the
file: and
4)
A description of the exact contents
of
any machine-readable copyright
notice
employed in or with the work
and
the manner and frequency with
which
it is displayed (e.g., at
user's
terminal only at sign-on, or
continuously
on terminal display, or
on
printouts, etc.). If a visually
perceptible
copyright notice is
placed
on any copies of the work
(such
as magnetic tape reels or their
container),
a sample of such notice
must
also accompany the statement.
See
37 C.F.R. 202.20(c)(2)(vii)(B).
806.13
Motion pictures. The following requirements
apply
to unpublished and published motion pic-
tures.
806.13(a)
Unpublished motion pictures. The applicant
may,
for registration, deposit one complete
copy
or identifying material. In either
case,
a description is also required. See 37
C.F.R.
202.20(c)(2)(ii) and 202.21(g).
[1984]
800-36
806
Quantity and content of material deposited: special :;.
situations.
(cont'd)
806.13
Motion pictures. (cont'd)
806.13(a)
Unpublished motion pictures. (cont'd)
806.13(a)(I)
Deposit of complete copy. If the appli-
cant
chooses to deposit an actual copy of
the
work, the copy must be complete. A
copy
is complete if the reproduction of
the
visual and sound elements is clean,
undamaged,
undeteriorated, and free of
splices,
and if the copy and physical
housing
have no defects which would
interfere
with performance of the motion
picture
or cause mechanical, visual, or
audible
defects or distortions. See 37
C.F.R.
202.20(b)(2)(vi). The copy must
be
accompanied by a separate description
of
its contents, which may be a conti-
nuity,
a pressbook, or a synopsis. See
37
C.F.R. 202.20(c)(2)(ii). However,
when
the Copyright Office is asked, it
will
encourage the deposit of a shooting
.script
as the description.
806.13(a)(2)
Deposit of identifying material. If the
applicant
chooses to deposit identifying
material
instead of an actual copy, two
things
must be deposited:
1)
A description which may be a continuity,
a
pressbook, or a synopsis but which
must
include the title or continuing
title
of the work and the episode
title,
if any: the nature and general
content
of the program: the date of
first
fixation and whether it took
place
simultaneously with first
transmission:
the date of first
transmission,
if any: running time:
and
credits, if any, appearing on the
work:
and
2)
Either an audio cassette or other
phonorecord
reproducing the entire
sound
track or other sound portion of
[1984]
800-37
806
Quantity of content of material deposited: special situations. (cont’d)
806.13
Motion pictures. (cont'd)
806.13(a)
Unpublished motion pictures. (cont'd)
806.13(a)(2)
Deposit of identifying material. (cont'd)
2)
(cont’d)
the
motion picture, or a set con-
sisting
of one frame-enlargement or
similar
visual reproduction from each
10-minute
segment of the motion pic-
ture.
Frames clipped from the film
are
not acceptable.
806.13(b)
Published motion pictures. The deposit
requirements
for published motion pictures
consist
of one complete copy of the best
edition
of the motion picture and a
description.
806.13(b)(1)
Deposit of the best edition. The best
edition
of a motion picture is determined
by
referring to the criteria listed in
the
Best Edition Statement. See Appendix
to
this chapter.
806.13(b)(2)
Deposit of a complete copy. The copy
must
be complete, meaning that the repro-
duction
of the visual and sound elements
comprising
the copyrightable subject
matter
in the work must be clean, un-
damaged,
undeteriorated, and free of
splices,
and that the copy itself and its
physical
housing must be free of any
defects
which would interfere with per-
formance
of the motion picture, or cause
mechanical,
visual, or audible defects or
distortions.
See 37 C.F.R. 202.20(b)
(2)(vi).
806.13(b)(3)
Deposit f description. The copy must be
accompanied
by a separate description of
its
contents which may be a continuity, a
pressbook,
or a synopsis. See 37 C.F.R.
202.20(c)(2)(ii).
However, when the
[1984]
800-38
806
Quantity and content of material deposited: special
situations.
(cont'd)
806.13
Motion pictures. (cont'd)
806.13(b)
Published motion pictures. (cont'd)
806.13(b)(3)
Deposit of description. (cont'd)
Copyright
Office is asked, it will
encourage
the deposit of a shooting
script
as the description.
806.13(b)(4)
Separately registrable works of authorship fixed in film, videotape, or the
like.
A film, videotape, or the like can
constitute
the form of embodiment in
which
a copyrightable work other than a
motion
picture is fixed. Generally, in
such
cases the deposit requirements for
the
particular work of authorship being
registered
govern the form of the deposit,
rather
than the deposit requirements for
motion
pictures. Examples include the
following:
1)
Pantomime fixed in a one-half-inch
videocassette.
2)
Choreography fixed in a hologram.
3)
Resume spoken and fixed in a three-
quarter-inch
videocassette.
4)
Graphic illustrations fixed in Super
8
film.
NOTE:
For deposit requirements in the
case
of an unpublished work that is fixed
or
a published work that is published
only
as embodied in a sound track that is
an
integral part of a motion picture, see
section
806.11 above.
[1984]
800-39
807
Motion picture Agreement. The Library of Congress
may,
at its sole discretion, enter into an agreement
permitting
the return of copies of published motion
pictures
to the depositor under certain conditions
and
establishing certain rights and obligations with
respect
to such copies on the part of both the
depositor
and the Library of Congress. The Deposits
and
Acquisitions Section of the Acquisitions and
Processing
Division of the Copyright Office
administers
the Motion picture Agreement. See 37
C.F.R.
202.20(c)(2)(ii)
The
Motion picture Agreement provides that after
copyright
registration has been completed the deposit
copy
will be returned to the depositor at the de-
positor's
expense. However, a copy for addition to
the
Library's permanent collections is subject to
recall
by the Library of Congress at any time within
a
period of two years. In signing the Motion picture
Agreement,
the depositor agrees, if the film is re-
called,
to provide the Library with a copy which
meets
the archival quality standards set forth in the
Agreement.
807.01
Who may enter into the Agreement. The Agreement
is
available upon request to owners of copyright
in
published motion pictures or owners of the
exclusive
right of publication (including the
exclusive
right of distribution in the United
States)
who are depositing a copy of the motion
picture
in the Copyright Office and to foreign
depositors
whose works, although initially pub-
lished
outside the united States, have been pub-
lished
in the United States before the date of
deposit.
NOTE: Foreign depositors whose motion
pictures
are published only outside the United
States
before the date of deposit may enter into
the
Motion picture Agreement by executing the
basic
Agreement, together with a Standard Modi-
fication
of the Agreement, provided that the
depositor
has an established business office in
the
United States, or has designated a United
States
agent with express authority to receive
service
in the event the Agreement is breached.
807.02
Who may sign the Agreement. An individual
depositor
or a legal representative may sign the
Agreement.
A business entity depositor may sign
[1984]
800-40
I
807
Motion Picture Agreement. (cont'd)
807.02
Who may sign the Agreement. (cont'd)
the
Agreement through a legal representative
empowered
to bind the business entity, as for
example,
the officer of a corporation, an
attorney-in-fact
for the depositor, or another
agent
of a depositor satisfactory to the Library
of
Congress. In certain cases, the Standard
Modification
must be completed: see NOTE in
section
807.01 above. Also, in certain cases,
a
bond signed by the attorney-in-fact for the
depositor,
which subjects such attorney-in-fact
to
certain liability under the Agreement, is
required
in addition to the Agreement.
807.03
Return of deposit copy under the Agreement. The
Copyright
Office will return the motion picture
to
the depositor under the Agreement if it
receives
a specific written request for return of
that
particular motion picture. In general, the
following
conditions apply for the return of
motion
pictures:
1)
If a motion picture is to be returned by a ..
private
carrier designated by the depositor,
shipment
instructions must be included with
the
request for return. The instructions
must
name the carrier to be contacted, give
an
account number (if available), indicate
that
the motion picture is to be returned at
the
depositor's expense, include a declara-
tion
of value, and state the amount of
insurance
required.
2)
If the depositor so requests, the motion pic-
ture
will be shipped collect by means of a
private
carrier chosen by the Library of
Congress,
with insurance coverage at the
depositor's
expense, to the amount of the
declared
value: if no value has been de-
clared,
the amount of this insurance will be
based
on the estimated replacement cost for a
copy
of identical physical characteristics
produced
by a commercial laboratory.
[1984]
800-41
807
Motion picture Agreement. (cont'd)
807.03
Return of deposit copy under the Agreement. (cont' d )
3)
Unless the Copyright Office is otherwise
directed
in writing at the time of deposit,
motion
pictures will be returned to the
depositor
by Special Fourth Class Mail. In
these
cases, the Library of Congress does
not
assume any responsibility for providing
insurance.
Because of the high risk of loss
with
respect to certain films, the Copyright
Office
will ordinarily attempt to contact
depositors
of 35mm feature films, oversize
deposits,
and copies of special value for
instructions
for return by private carrier
at
the depositor's expense.
807.04
Recall of the deposit coy under the Agreement.
At
any time within a period of two years, the
Library
of Congress may make a written request
that
a copy of archival quality be submitted for
its
permanent collections under the terms of the
Motion
picture Agreement. Upon receipt of that
request
one complete copy of the film, meeting
the
standards set forth in Appendix A of the
Agreement,
must be sent to:
Motion
picture Section
Motion
picture Broadcasting and
Recorded
Sound Division
The
Library of Congress
Washington,
D. C. 20540
807.05
Quality of copy deposited under the Agreement.
If
a depositor has signed the Motion picture
Agreement
and deposits a copy, but does not
request
the return of the copy, it is considered
a
"non-agreement" film and is treated as though
there
is no Agreement on file. The standards
that
govern the quality of such a copy are those
explained
in section 806.13 above, and the
special
"archival quality" standards which are
set
forth in the language of the Agreement, and
Appendix
A thereto, do not apply. However, any
copy
recalled by the Library of Congress under
the
Agreement must meet all the technical guide-
lines
set forth in Appendix A to the Agreement.
[1984]
800-42
807
Motion picture Agreement. (cont'd)
807.06
Supplemental Property Agreement. Where
a
depositor
who has entered into a Motion picture
Agreement
has deposited for registration a copy
of
a motion picture which does not represent the
form
of copy which the Library of Congress wishes
to
retain for its collections, such copy may be
accepted
for registration if the depositor speci-
fically
agrees in accordance with a Supplementary
Property
Agreement that a copy of archival
quality
will be delivered on demand under the
Motion
picture Agreement.
807.07
Termination of the Motion picture Agreement.
The
Library of Congress may terminate the Motion
picture
Agreement for any good cause, including
single
or repeated instances of breach of the
Agreement.
If an Agreement is terminated by the
Library,
the termination applies only to motion
pictures
deposited after the termination, and
does
not affect the rights or obligations of
either
party with respect to any copies already
deposited
or returned under the Agreement. If
the
Agreement is terminated by the Library, it is
.not
subject to reinstatement unless the Library
believes
that reinstatement, or entering into a
new
Agreement, would be in its best interests.
See
37 C.F.R. 202.20(c)(2)(ii).
808
Special relief from the deposit requirements for
registration.
Special relief is a procedure which
allows
the Register of Copyrights to grant the
requestor
the option of depositing less than or other
than
that which is required under the general deposit
provisions.
See 37 C.F.R. 202.20(d); see also 17
U.S.C.
407(c) and 408(c).
808.01
Special relief: in general. Special relief was
devised
because it is impossible to establish
exemptions
or alternatives to cover all cases
where
the general deposit provisions of the
statute
might cause unnecessary hardship.
Special
relief is intended to respond to the
legislative
directive that deposit provisions be
kept
flexible "so that there will be no obliga-
tion
to make deposit where it serves no purpose,
so
that only one copy or phonorecord may be
[1984]
800-43
I
808
Special relief from the deposit requirements for
registration.
(cont'd)
808.01
Special relief: in general. (cont'd)
deposited
where two are not needed, and so that
reasonable
adjustments can be made to meet
practical
needs in special cases." See H.R.
Rep.
No.94-1476, 94th Cong., 2d Sess. at 151
(1976),
and S. Rep. No.94-473, 94th Cong., 1st
Sess.
at 134 (1975).
808.02
Special relief: criteria. The decision whether
to
grant special relief is based on the acquisi-
tion
policies of the Library of Congress in force
at
the time the request is made and the examining
and
archival requirements of the Copyright Office.
808.03
Special relief: procedures. The procedures for
special
relief are the following.
808.03(a)
Required elements of request. Requests for
special
relief must be made in writing to the
Chief,
Examining Division, Copyright Office.
The
request must be signed by or on behalf of
the
person signing the application for regis-
tration.
The request must set forth the
specific
reasons that it should be granted.
Examples
include unavailability of the re-
quired
deposit, financial burden, confiden-
tiality,
rarity, fragility, and weight. The
request
should also state the form of relief
desired,
.., permission to deposit one copy
or
phonorecord rather than two, permission to
deposit
alternative identifying material
rather
than one or two copies or phono-
records,
permission to deposit incomplete
copies
or phonorecords rather than those
normally
constituting the best edition, or
(for
works first published before 1978)
permission
to deposit a later printing or
edition
rather than the work as first pub-
lished.
808.03(b)
Responsibility for decision. The decision to
grant
or deny special relief is made by the
Chief
of the Examining Division after con-
sultation
with the Chief of the Acquisitions
and
processing Division of the Copyright
Office.
[1984]
800-44
808
Special relief from the deposit requirements for
registration.
(cont'd)
808.03
Special relief: procedures. (cont'd)
808.03(c)
Special relief granted. When special relief
is
granted, the application will be anno-
tated
as follows: "Special relief granted
under
37 C.F.R. 202.20(d)." This annotation
is
keyed with an asterisk to the "DEPOSIT
RECEIVED"
space on the application for regis-
tration.
NOTE:
Where the work was first published
before
1978, the annotation should also re-
flect
the nature of the material deposited
and
refer to the remitter's letter: for
example:
1)
"Photocopies accepted under a grant of
special
relief in accordance with 37
C.F.R.
202.20(d). See correspondence
file."
2)
"Second printing accepted under a grant
of
special relief in accordance with 37
C.F.R.
202.20)(d). Re: notice of
copyright
on copies as first published,
see
applicant's letter of ________."
808.03(d)
Special relief denied. Where the special
relief
is denied, the applicant will be
notified
in writing, and the letter to the
applicant
will set forth the reasons for the
denial.
808.04
Special relief: continuous or ongoing grants.
In
some cases a grant of continuous or ongoing
special
relief is possible. The procedures and
criteria
for such relief are the same as for
one-time
special relief. In such cases, however,
the
applicant is asked to include with each sub-
mission
a covering letter or memorandum referring
to
such grant and the date thereof. Any con-
tinuous
grant may be terminated by the Chief of
the
Examining Division after consultation with
the
Chief of the Acquisitions and Processing
Division
of the Copyright Office. Notice of
[1984]
800-45
808
Special relief from the deposit requirements for
registration.
808.04
Special relief: continuous or ongoing grants.
(cont'd)
termination
will be in writing and will set forth
the
specific date of termination which must be at
least
30 days later than the date the notice is
mailed.
This notice is sent to the individual or
organization
to whom the grant of special relief
had
been given at the last address shown in the
records
of the Copyright Office.
809
Relationship of deposit for registration to mandatory
deposit
under 17 U.S.C. 407. The deposit for a pub-
lished
work that is acceptable under section 408 of
the
current Act, which deals with copyright regis-
tration,
also satisfies the deposit requirements of
section
407 of that Act, which deals with deposit for
the
use or disposition of the Library of Congress.
810
Appendix. The text of the "'Best Edition' of pub-
lished
Copyrighted Works for the Collections of the
Library
of Congress," mentioned in this chapter,
appears
as an APPENDIX which follows this page.
[1984]
800-46
I
APPENDIX
"Best
Edition" of Published Copyrighted Works
for
the Collections of the Library of Congress*
The
Copyright Law (Title 17, United States Code) re-
quires
that copies or phonorecords deposited in the
Copyright
Office be of the "best edition" of the work. The
law
states that "The 'best edition' of a work is the edition,
published
in the United States at any time before the date
of
deposit, that the Library of Congress determines to be
most
suitable for its purposes."
When
two or more editions of the same version of a
work
have been published, the one of the highest quality
is
generally considered to be the best edition. In judging
quality,
the Library of Congress will adhere to the criteria
set
forth below in all but exceptional circumstances.
Where
differences between editions represent varia-
tions
in copyrightable content, each edition is a separate
version
and .'best edition" standards based on such dif-
ferences
do not apply. Each such version is a separate
work
for the purposes of the Copyright Law.
Appearing
below are lists of criteria to be applied in
determining
the best edition of each of several types of
material.
The criteria are listed in descending order of
importance.
In deciding between two editions, a
criterion-by-criterion
comparison should be made. The
edition
which first fails to satisfy a criterion is to be considered of inferior
quality and will not be an acceptable
deposit.
For example, if a comparison is made between
two
hardbound editions of a book, one a trade edition
printed
on acid-free paper and the other a specially
bound
edition printed on average paper, the former will
be
the best edition because the type of paper is a more
important
criterion than the binding.
Under
regulations of the Copyright Office, potential de-
positors
may request authorization to deposit copies or
phonorecords
of other than the best edition of a specific
work
(e.g., a microform rather than a printed edition of a
serial).
* This excerpt is taken from Volume 43, No.2 of
the Federal
Register for Wednesday, January 4, 1978 (p.
766).
[1984]
800-47
I.
PRINTED TEXTUAL MATTER
A. Paper, Binding, and
Packaging:
B.
1
.Archival-quality rather than less-permanent paper.
2.
Hard cover rather than soft cover.
3.
Library binding rather than commercial binding.
4.
Trade edition rather than book club edition.
5.
Sewn rather than glue-only binding.
6.
Sewn or glued rather than stapled or spiral-bound.
7.
Stapled rather than spiral-bound or plastic-bound.
8.
Bound rather than looseleaf, except when future
looseleaf
insertions are to be issued.
9.
Slipcased rather than nonslipcased.
10.
With protective folders rather than without (for
broadsides).
11.
Rolled rather than folded (for broadsides).
12.
With protective coatings rather than without (except
broadsides,
which should not be coated).
B.
Rarity:
1
.Special limited edition having the greatest number of
special
features.
2.
Other limited edition rather than trade edition.
3.
Special binding rather than trade binding.
C.
Illustrations:
1.
Illustrated rather than unillustrated.
2.
Illustrations in color rather than black and white.
D.
Special Features:
1
.With thumb notches or index tabs rather than with-
out.
2.
With aids to use such as overlays and magnifiers
rather
than without.
E.
Size:
1.
Larger rather than smaller sizes. (Except that
large-type
editions for the partially-sighted are not
required
in place of editions employing type of more
conventional
size.)
II.
PHOTOGRAPHS
A.
Size and finish, in descending order of preference:
1.
The most widely distributed edition.
2.8
x 10-inch glossy print.
3.
Other size or finish.
B.
Unmounted rather than mounted.
C.
Archival-quality rather than less-permanent paper
stock
or printing process.
[1984]
800-48
III.
MOTION PICTURES
A.
Film rather than another medium. Film editions are
listed
below in descending order of preference.
1.
Preprint material, by special arrangement.
2.
Film gauge in which most widely distributed.
3.35
mm rather than 16 mm.
4.16
mm rather than 8 mm.
5.
Special formats (e.g., 65 mm) only in exceptional
cases.
6.
Open reel rather than cartridge or cassette.
B.
Videotape rather than videodisc. Videotape editions
are
listed below in descending order of preference.
1.
Tape gauge in which most widely distributed.
2.
Two-inch tape.
3.
One-inch tape.
4.
Three-quarter-inch tape cassette.
5.
One-half-inch tape cassette.
IV
.OTHER GRAPHIC MATTER
A.
Paper and Printing:
1
.Archival quality rather than less-permanent paper .
2.
Color rather than black and white.
B.
Size and Content:
1.
Larger rather than smaller size.
2.
In the case of cartographic works, editions with the
greatest
amount of information rather than those
with
less detail.
C.
Rarity:
1
.The most widely distributed edition rather than one
of
limited distribution.
2.
In the case of a work published only in a limited,
numbered
edition, one copy outside the numbered
series
but otherwise identical.
3.
A photographic reproduction of the original, by spe-
cial
arrangement only.
D.
Text and Other Materials:
1
.Works with annotations, accompanying tabular or
textual
matter, or other interpretative aids rather than
those
without them.
E.
Binding and Packaging:
1
.Bound rather than unbound.
2.
If editions have different binding, apply the criteria in
I.A.2-I.A.7,
above.
4.
Rolled rather than folded.
5.
With protective coatings rather than without.
[1984]
800-49
V.PHONORECORDS
A.
Disc rather than tape.
B.
With special enclosures rather than without.
C.
Open-reel rather than cartridge.
D.
Cartridge rather than cassette.
E.
Quadraphonic rather than stereophonic.
F.
True stereophonic rather than monaural.
G.
Monaural rather than electronically rechanneled
Stereo.
VI.
MUSICAL COMPOSITIONS
A.
Fullness of Score:
1.
Vocal music:
a.
With orchestral accompaniment-
i.
Full score and parts, if any, rather than conductor's
score
and parts, if any. (In cases of compositions
published
only by rental, lease, or lending, this re-
quirement
is reduced to full score only.)
ii.
Conductor's score and parts, if any, rather than con-
densed
score and parts, if any. (In cases of compo-
sitions
published only by rental, lease, or lending,
this
requirement is reduced to conductor's score
only.)
b.
Unaccompanied: Open score (each part on separate
staff)
rather than closed score (all parts condensed
to
two staves).
2.
Instrumental music:
a.
Full score and parts, if any, rather than conductor's
score
and parts, if any. (In cases of compositions
published
only by rental, lease, or lending, this re-
quirement
is reduced to full score only.)
b.
Conductor's score and parts, if any, rather than con-
densed
score and parts, if any. (In cases of compo-
sitions
published only by rental, lease, or lending, this
requirement
is reduced to conductor's score only.)
B.
Printing and Paper:
1.
Archival-quality rather than less-permanent paper.
C.
Binding and Packaging:
1.
Special limited editions rather than trade editions.
2.
Bound rather than unbound.
3.
If editions have different binding, apply the criteria in
I.A.2-I.A.12,
above.
4.
With protective folders rather than without.
[1984]
800-50
VII.
MICROFORMS
A.
Related Materials:
1
.With indexes, study guides, or other printed matter
rather
than without.
B.
Permanence and Appearance:
1.
Silver halide rather than any other emulsion.
2.
Positive rather than negative.
3.
Color rather than black and white.
C.
Format (newspapers and newspaper-formatted
serials):
1.
Reel microfilm rather than any other microform.
D.
Format (all other materials):
1.
Microfiche rather than reel microfilm.
2.
Reel microfilm rather than microform cassettes.
3.
Microfilm cassettes rather than micro-opaque prints.
E.
Size:
1.
35 mm rather than 16 mm.
VIII.
WORKS EXISTING IN MORE THAN ONE MEDIUM
Editions
are listed below in descending order of prefer-
ence.
A.
Newspapers, dissertations and theses, newspaper-
formatted
serials:
1.
Microform.
2.
Printed matter.
B.
All other materials:
1.
Printed matter .'
2.
Microform.
3.
Phonorecord.
(Effective:
January 1, 1978.)
[END
OF CHAPTER 800]
[1984]