Drawings and documents
Published accounts: specification
Specification printed in the Mirror of the Patent Office (1828)
American Journal of Improvements in the Useful Arts, and Mirror of the Patent Office, vol. 1 (Washington, 1828) · View the page
Text of the specification as printed in the Mirror of the Patent Office, machine-transcribed from the page scans (GLM-OCR); not proofread. Check the scan for figures and reference letters.
By Dr. John Eoff, of Wheeling, Va.
Specification—Stone-coal, in many parts of the United States, particularly in the western country, is so abundant, and so much less expensive as a fuel, that it has become an object of great solicitude, with manufacturers particularly, to substitute the use of coal for wood, in their establishments. Some of them have succeeded, but not to as great an extent as the thing is capable of; whilst others have, in all their attempts, totally failed.
In the manufacture of salt, at the works on Kanawha river, which are the most extensive of the kind in America, wood alone is used. At those works, some of the proprietors have made many attempts, attended with great expense, but without success, to substitute coal. The reason of their failure, was owing to the circumstance of the projector being unable to cause a consumption of the smoke, which escaped from the coal. It is known to all, conversant with this subject, that coal, in a state of combustion, emits a prodigious quantity of thick, dense smoke, and more of this smoke is produced from the coal of the western country, than perhaps any other in the world, owing to its constituent principles.
The furnaces heretofore constructed at Kanawha, or elsewhere, were so formed as to consume but a very small part of the smoke, the residue adhering to the bottom and sides of the kettles, and being a non-conductor of heat, excludes it in so great a degree, as to prevent the water in the kettles from receiving a sufficient quantity, to produce a rapid evaporation. At other salt-works, glass-works, steam furnaces, &c., where coal is used, it is to a great disadvantage, the furnaces being very short, and a very great portion of the heat passes off with the smoke, and a much larger quantity of fuel used, to produce the same effect, than ought to be.
In the present construction of stoves, for the burning of stone-coal, the inconvenience arising from the great quantity of smoke passing off without being consumed, is seriously felt in two respects: first, in the additional quantity of fuel necessary to supply the stove, and in the quantity of smoke or soot adhering to the sides of the stove-pipe, choke it up, and impose the trouble and expense on the owner, of pulling it down, and cleansing it very often, at least once a month or oftener.
I propose to remedy the inconvenience above mentioned, by destroying all the smoke, when, instead of its being a disadvantage, it will add to the heat one fourth of the fuel, used in the present way. All furnaces, used for the purpose of manufacturing salt, and for other purposes, now in use, do not admit any atmospheric air into them at any other place, except that which passes through the heated fuel, which is placed at or near the mouth. The flues or chimneys which they enter into, are raised to a height sufficient to insure them sufficient draught. Now, in one of these furnaces it is impossible for the smoke to be consumed. The atmospheric air passing through the heated coal, all the oxygen in that air, combines with it, and produces the flame, so that there is scarcely a particle of oxygen gets into the furnace beyond the fuel. Therefore, let the smoke be ever so capable of combustion, (which we know it is) and heated to any degree, we know it is impossible for it to burn, without the oxygen of the atmospheric air coming in contact with it; and in any furnace now in use, all the oxygen is made use of in passing through the fuel. Now, in order to consume all the smoke, and produce one continued flame, as long as there is any smoke in the furnace, all that is necessary, is, to admit the atmospheric air into the furnace in proper quantities, by tubes or otherwise, beyond the fuel, so that the heated smoke may receive a quantity of pure air, sufficient to consume it. The admission of air for this purpose may be through holes or tubes; the latter are preferable to be constructed and applied as follows: Place a tube of sheet-iron or other metal, three inches in diameter, or larger, if you wish to make use of a great heat in your furnace, in each wall, to extend from the mouth two-thirds of the way towards your chimney, pursuing the elevation of the wall, or of sufficient elevation to produce considerable draught. From these tubes let small pipes pass off into the furnace at small distances from each other, so as to supply the heated smoke with sufficient oxygen to consume it, and, at the same time, not to admit so much atmospheric air in at one place, as to lessen the temperature of the smoke below the point of combustion. By adopting the above plan proposed, the atmospheric air, by means of tubes and little pipes, will be let into the furnace, and acting on the heated smoke, will, inevitably, cause it to burn; consequently, the furnace must receive the heat caused by that combustion, and that very smoke which is now, in the common furnaces, the great obstacle to the use of coal, will, by the adoption of this method, be, at least, an addition of one fourth, to its combustible qualities. Now, with respect to applying the principle to stoves, all that will be necessary, is to have your stove cast with two tubes, one on each side, on the outsides of the stove, passing from the lower to the upper part of the stove, the upper part of the tube closed; small holes drilled or cast, to pass from each tube into the stOVE, from just above the fuel to the top of the tube; the size of those tubes, and the small holes from them, must be varied according to the quantity of fuel you wish to use in your stove; or, in other words, the size of your stove and the heat you wish to produce.
Besides its application to furnaces for the purpose of manufacturing salt, glass foundaries, steam engines, &c., it is particularly adapted to the furnaces in use, for the purpose of distilling ardent spirits, in which a number of attempts have been made to substitute stone-coal for wood, but all have failed heretofore, owing to the same cause, viz. the soot attaching itself to the bottom of the stills. Also in the burning of brick in the western country, where stone-coal is easily procured, and at a small expense, by adopting the above method, at least two-thirds of the expense of the fuel may be saved. In brick kilns the tubes may be dispensed with: small apertures may be left in the outside walls, so as to admit atmospheric air into the centre of the kiln, without passing through the fuel.
Patented May 5, 1810.
About this record
- Listed in
- the Mirror of the Patent Office (1828)
- This patent has no X number: it is not in the list of patents restored after the 1836 fire. It is known only from the printed lists named below. The reference number (U…) is the IP Mall’s own.
- Listed in the Journal of the Franklin Institute or the Mirror of the Patent Office at the time of issue.