Drawings and documents
National Archives restored drawings: drawing
Beriah Shift's Patent Drawing for a Machine for Shearing Clothes
National Archives, Restored Patent Drawings (Record Group 241) · Full-size scan at the National Archives · Catalog record
Show the text on the drawing Hide (307 words)
Words on the drawing as machine-read by the National Archives; not checked. Useful mainly for searching.
Sheet 1. 23 CLOTH. / [87] Shearing / $658 / Plate I. / BERIAH SHIFT. / 2162.7 / DIVISION / Machine for shearing Bleths. / Patented July 1.5t 1814. Vol 3. page 289 / side view. / End view / 14 / August A. Ton Pchmidt / Reference / Several Tuckness of of alith / H, covered cylinders, hung on the end of a hrizental frame(l )which work in rabbet (n,n,) / A, Frame / m,m, adjusting screws / Patent Office / B,B,B,B, Four upright posts, with rails (C.C.) & braces a,a,, / 0, bed shear... I, main shaft. to, crank.) J, Large virtical wheel-- / Feb.28.1846 / D,D, greeves for the carriage to run in. / K, small vertical wheel: q, cord on wheel(J) which gives motion / Made under the direction of the Commissioner / E, the carriage moving on rellers (b,b,b,se) / to wheel at the end ofsmall shaft(s) which gives motion, by / F,F, cylinders for rolling on the cloth with rag wheels (dd) / the unequal cranks( t,t,) connected to the steel spiral shear( 4)c / of Patents in conformity the act of / with two uniqual cranks u,u,) v, cords, moved by small wheel(K) / 3re of March 6837 / and digs(e) is heek(f) / which moving small axis of pinion (x) which moves rack(y) / 3, shewing the cloth / Aurke / on carriage ( Ei) / Z, spring lever, for throwing pinion(x) out of gear. / h,h, strecking rails with hooks(y'y') / x',x', two arms, which support the shears, on gudgeons(e'e') / i, windlass, with rag wheel(j) If dig(k) & cord (d') / Commissioner of Patents
Sheet 2. CLA TAXIS / Beriah swift / Plate II, / 2162+ / VISISION / Machine for shearing cloths an / TOP VIEW. / OIR / Patent Office / Fuby 28th 1846 / made under the direction of the Commifsioner / of Patents in conformity with the act of / 3rd of March. 1837 / Commisiona of Patents
USPTO scan
The patent as scanned by the USPTO
U.S. Patent and Trademark Office · Google Patents
Show the transcription Hide (689 words)
Machine transcription (LightOnOCR) of the pages as scanned by the USPTO, most of them the handwritten copies made when the records were restored after the 1836 fire. Not checked; it can misread handwriting, so compare it with the scan.
Page 1.
2162X
Sheet 1-2 Sheets.
B. Swift.
Cloth Shearing Mach.
Patented Jul. 1, 1814.
Page 2.
2162X
Sheet 2-2 Sheets.
B. Swift.
Cloth Shearing Mach.
Patented Jul. 1, 1814.

Page 3.
Jeremiah Swift
Letters a Patent.
The schedule referred to in their Letters Patent and making part of the same containing a description in the words of the said Jeremiah Swift himself of his Machine for Shearing Cloths.
This Machine consists of a frame about fourteen feet in length and about four feet in breadth. The bottom piece which is grooved or inflected for the carriage to run in, and on which are four upright pieces with suitable rails and braces to support the main shaft and the wheels connected therewith together with the shears. The carriage which moves within the said frame or rollers, requires to be about seven feet in length, three feet in height and two feet six inches in width. To which is connected lengthways two cylinders (each capable of receiving a whole piece of cloth) with say eight, large, gudgeons and hooks, one to roll the cloth in process to its being sheared and from which the cloth passes over lengthways across the top of the carriage where it is strained between two rails with hooks on the top of the said carriage and is tightened by means of a windlass which has a rope which runs say fixed at the end of said carriage by brackets which are fastened two ends connected with one of the stretching rails. The other of the rails are fixed to the carriage behind the curved cylinder. The cloth then passes over the top of said carriage after it is sheared to the other cylinder on which it is rolled, and the far end of this carriage
Page 4.
is a cylinder covered with several thicknesses of cloth hung on gliders at the end of a frame which moves horizontally by means of two screws at the end of the main frame to adjust the screw cylinder to the shears, and which being firmly fixed in a socket and is fixed with the top of the carriage the said screw cylinder is raised one half of its diameter above the top of the carriage to support the cloth up to the shears side. The main shaft is put in motion by turning of a crank, to the shaft is fixed a large and a small vertical wheel, the large one is connected by a strap or cord to a small wheel at the end of a small shaft, which gives motion by means of two unequal arms connected to the steel spiral shears which cause them to have a vibrating motion over the edge of the bed shears by means of two unequal cranks and which said shears are immediately over the screw cylinder and all of which are fixed on suspended supports on the carriage, the small vertical wheel on main shaft is connected with two other vertical wheels by cords or straps one of which is on the axis of the pinion which gives motion to the carriage by means of a rack fixed thereto, and as the frame is so moved the same operation gives motion to the spiral vibrating shears which thereby performs the operation of shearing the cloth every way equal to the hand shears and a youth fourteen or fifteen years of age can under the improved machine perform four times the quantity shearing that a good and experienced workman can turn out of hours by means of hand shears, a spring lever is fixed on the side of the main frame over the pinion to throw it out of gear so that the carriage may be moved back. The spiral shears and its shaft together with the bed shears is fixed in a frame or two arms with shaft being on groggers so that the shears may
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP, USPTO records
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, USPTO records, Jim Shaw's X-patent list, S. A. Elliot's printed list of patents, Burke's List of Patents (1847)
- S. A. Elliot's printed list of patents gives the same name and date.
- Burke's 1847 Patent Office list gives the same patent.