Drawings and documents
National Archives restored drawings: drawing
P. Cooper's Patent Drawing for a Cradle
National Archives, Restored Patent Drawings (Record Group 241) · Full-size scan at the National Archives · Catalog record
Show the text on the drawing Hide (87 words)
Words on the drawing as machine-read by the National Archives; not checked. Useful mainly for searching.
6. / // / 5. BEDS / Prodles, Motor Operated. / Household / 10000 / CLASSIFICATION / 2281-X / P.COOPER / DIVISION. / Cradle / Patented / A Footperces / B Unrightposts / C. / Crofs bars / D. Crown wheel / E Cradle / A' Streps of Wood / Co. Pallet connected with / H. Lever to disengage the pallet the Crown Wheel in Winning / K. Wesphts Card / DIO / Strichland Del / Patent / Made under the disction of the commissioner of patents / in conformity with act 7 "Manh 1837 / Manryd RubwiNs / Eng. / Commissioner of patent
USPTO scan
The patent as scanned by the USPTO
U.S. Patent and Trademark Office · Google Patents
Show the transcription Hide (650 words)
Machine transcription (LightOnOCR) of the pages as scanned by the USPTO, most of them the handwritten copies made when the records were restored after the 1836 fire. Not checked; it can misread handwriting, so compare it with the scan.
Page 1.
2281X
P. Cooper,
Cradle,
Patented Mar. 27, 1815.

Page 2.
Patent Cooper & Sellers Patent
March 29th 1815
The schedule referred to in the Letters Patent and making part of the same containing a description in the words of the said Mr. Cooper himself of his improvement in the Crane.
The top or pieces are made of timber or plank of about two feet and a half long & four inches broad & one inch & half thick which are made to support the whole machinery for propeller in the centre of each of them there is a post of about four feet and half high eight inches wide at bottom and three inches at the top & one inch thick which are connected together at the top and bottom by the bars. The bars three feet wide in the frame inside to inside of the frame and is six inches broad & one inch thick and have a barrel upon each end of it which passes through the posts and is fixed upon the outside of the said posts the bar is one inch and half broad & the same length and thick as the bars & may be fastened in a similar way. Another post is placed with its foot resting on the lower bar and its top fast in the upper at about three inches from one of the top posts front machinery; between them the posts to be spoken of a cross wheel similar to that in a clock the axis of which rests & is made to turn in the said posts at about one foot from the top the wheel being next to the inner post and the outer end of it furnished with a crank with two ears or fastened on it for the purpose of winding up the machine as hereafter directed between the intermediate post and the one at the other end of the frame is hung a receptacle for the whole which may be either a cradle or box of dimensions such as are best to fancy and convenient the bottom of this cradle is near the top of the lower cross bar and is suspended by the small strips of wood of one inch and a quarter square one fastened at each end of it and reaching nearly to the top of the frame where they are made to hang in a rope the said posts by means of the small wires hung at right angles the one next to the lower wheel extending through the post and having a paddle like that of a clock working in the said
Page 3.
2281
Crane wheel, a weight of sufficient gravity being suspended by a cord wound up upon the axis of the wheel and the cord being then put in motion it will rotate like the pendulum of a clock and the weight to run down. In order to winding up the machinery after being run down it is only necessary to turn the crank of the wheel to turn up the axis with a catch or if the wheel be fast upon its axis the pallet may be cleaned and disengaged from the wheel while winding up by means of a lever placed on the top of the machine and made to lift up that end of the crank by a wire passing from the lever down through the upper orifice bar and around the end of the pallet.
The principal claim to a patent right consists in giving motion to a crank by means of Weight, Crane Wheel and pallet.
Witnesses
Stephen Conner
Margaret Hedell
615 1785
Entered according to Act of Congress
About this record
- Patentee
- Jim Shaw's X-patent list
- Date
- the Name and Date index of patents, USPTO records, Jim Shaw's X-patent list
- Invention
- the Name and Date index of patents
- Listed in
- the Name and Date index of patents, USPTO records, Jim Shaw's X-patent list, S. A. Elliot's printed list of patents, Burke's List of Patents (1847)
- S. A. Elliot's printed list of patents gives the same name and date.
- Burke's 1847 Patent Office list gives the same patent.