Drawings and documents
Published accounts: specification
Specification printed in the Mirror of the Patent Office (1828)
American Journal of Improvements in the Useful Arts, and Mirror of the Patent Office, vol. 1 (1828), printed p. 442 · View the page
Text of the specification as printed in the Mirror of the Patent Office, machine-transcribed from the page scans (GLM-OCR); not proofread. Check the scan for figures and reference letters.
BREWING BEER BY THE USE OR APPLICATION OF STEAM.
By Harvey Hackley, of New York.
A steam boiler is to be set in a convenient part of the brewery, with safety valves, a water valve, and a vessel above it, to hold water for feeding it, called a feeder, as is usual with steam boilers in steam distilleries. At a suitable distance from the steam boiler, and at such an elevation as will command the mash-tun, is to be placed a vessel, called the water-heater, to be used for heating the water by means of steam from the steam boiler, and from the wort boiler, to be described, to mash the malt. The water-heATER is to be an entirely tight vessel, with a door in the top, large enough to receive a man, for the purpose of cleaning it, and through which the water is to be let in, and to ascertain the heat of the water: it is to have a cock or cocks, through which to draw off the water, that it may flow into the mash-tun.
The mash-tun (of the ordinary construction) is to be placed at an elevation sufficient to command the wort boiler, hereinafter described. The wort boiler, in which the wort is to be boiled by means of steam from the steam boiler, is to be an entirely tight vessel, with a door in the top of it, large enough to receive a man for the purpose of cleaning it, through which, to put in the hops, and through which the wort may flow in from the mash-tun: the wort boiler thus answers the purposes both of a boiler for the wort, and an underback. It is to have a cock or cocks through which the wort may flow out after it is boiled, and be permitted to flow into the coolers. A steam conductor is to proceed from the top of the steam boiler, and to enter at the top of, and extend near to the bottom of the water-heater, with a stop-cock fitted into it as near as may be convenient to the steam-boiler, to convey the steam from the steam boiler, into the waterheater. A steam conductor is also to proceed from the top of the steam boiler, and to enter at the top of, and extend to near the bottom of the wort boiler, with a stop cock fitted into it, as near as may be convenient to the steam boiler.
By means of the stop-cocks above mentioned, the steam may be all turned into the water heater, or all into the wort boiler, as occasion may require. Another steam conductor is to proceed from the top of the wort boiler, and to enter in at the top of, and extend near the bottom of, the water heATER, for the purpose of conveying the steam, while the wort is boiling, from the wort boiler into the water heater, thus heating the mashing water, and saving the sacharine of the malt and strength of the hops, with which the steam is impregnated, by condensing them in the mashing water: this will also enable the brewer to boil his wort quicker than he could in an open boiler, because it will be much hotter. In places where economy of fuel is an object, a steam conductor should proceed from the top of the water heater, and enter at the top of, and extend near to the bottom of the feeder to the steam boilers; because the water in the water heATER will sometimes boil before the wort in the wort boiler is boiled enough. This will save whatever heat may go off in steam, by means of heating the water in the feeder, which supplies the steam boiler. But when there is no steam conductor from the water heater to the feeder, the door to the water heATER must always be left unfastened. If any brewer does not find it convenient, in his way of brewing, to use the steam from the wort boiler, to heat the water in the water heATER for his next mashing, he may conduct it to, and discharge it into another vessel, and use it for any other purpose he may prefer: or, if one should prefer to have the steam go off from the wort boiler, without conducting it into the the water heater or another vessel, he has only to leave the door open after the wort is ready to boil.
The water heATER, the wort boiler, and the steam conductor to them, may be made of wood, metal, partly of each or of any other materials adapted to the purpose, and the fastenings for the doors of the water heater and the wort boiler will be different, according as one or another material is used; if the wort boiler and water heATER be made of wood, (as it is presumed they generally will be, because the cost of the wooden vessels will be trifling, compared to that of the metalic, or those composed of most other materials), the doors should be also of wood, with iron clasps rivetted on to them; the clasps should have openings in their ends to fit unto staples, and should be fastened by means of keys to drive in. The staples should be fastened on the inside of the vessels, by means of nuts to screw on to their ends.
In large breweries, in which the different vessels will of course be of large size, the steam should be discharged into the vessels at several openings to the steam conductors, at proper distances apart, so that the heat will more readily operate on all parts of the fluid, and also to prevent too great a concussion that might be occasioned by the heat coming in contact with the cold fluid, all at one place;—after the conductor enters those large vessels, it should branch off into several divisions, to effect the last mentioned object, because it is necessary that the steam be all discharged, at, or very near the bottom of the vessel. Philo M. Hackney’s patent steam boiler is recommended for the economy of fuel and room, as being the best in use. A common copper still, whose economy of fuel is not an object, will answer as well as a steam boiler; and it is believed a cast iron one would do.
Patented April 21, 1820.
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, Jim Shaw's X-patent list, the Mirror of the Patent Office (1828), S. A. Elliot's printed list of patents, Burke's List of Patents (1847)
- The specification was printed in the Mirror of the Patent Office (1828).
- S. A. Elliot's printed list of patents gives the same name and date.
- Burke's 1847 Patent Office list gives the same patent.