Drawings and documents
Published accounts: specification
Specification printed in the Mirror of the Patent Office (1828)
American Journal of Improvements in the Useful Arts, and Mirror of the Patent Office, vol. 1 (1828), printed p. 67 · View the page
Text of the specification as printed in the Mirror of the Patent Office, machine-transcribed from the page scans (GLM-OCR); not proofread. Check the scan for figures and reference letters.
IMPROVEMENT FOR EXTRACTING TANNIN,
By Joseph Giles, of Guildford, Vermont.
Specification.—This lixivium, or tanning principle, is obtained by soaking and digesting the proper materials, such as fine ground oak, or hemlock bark, &c. in an apparatus designed particularly for the purpose: that is to say, I take twelve leaches or vats, of any convenient capacity, each filled with ground bark, and so placed, as to draw by a cock, with suitable convenience, from each of the twelve leaches into one common receiver; I then place one cistern above the leaches, so as to draw from said cistern, into all the twelve leaches: Into this said upper cistern, I have a common engine for generating steam, operating so as to heat the liquor therein, to a boiling heat; which liquor, thus heated, I draw upon and fill the first of the said twelve leaches. I take care in filling the leaches with ground bark, that it be loose and be not crowded; but so that the liquor will freely fill the whole leach, and become saturated with the tanning principle of the bark; after thus lying upon the bark, and soaking it a convenient time, I draw it from the leach into the receiver; I then pump it from the receiver, back in the cistern, and heat it again with the steam engine, as before; then I draw the liquor upon the second leach, and while it is soaking there, I heat water, or weak liquor, drawn from the leach, after the first process, and draw the same from the cistern upon the first leach; I then draw the strong liquor from the second leach, into the receiver, and from thence, pump it again, into the cistern; I again heat it as before, and then draw it upon the third leach, and so continue the liquor—repeating the process through the whole twelve leaches, following on with the second, and third, and sometimes fourth addition, to the first leach—theaking care that none of the weak liquor or subsequent runnings become mixed with the first running and strong lixivium. As often as the tanning principle becomes entirely exhausted from the leach in any of the leaches, throw away the leach, and fill with fresh. By continuing this process, I reduce the entire tanning principle and strength of three, and even four cords of the best bark, into one hogshead of tanning lixivium: I then add two pounds of salt petre, and one pound of common salt, to each hogshead of my lixvivium, and bung it up, air-tight, for use.
One hogshead of this lixivium will, in three days time, sufficiently tan five dozen of calf-skins, and thick, and heavy skins and hides, in the same proportion. In addition to the great saving of time and labor of workmen, produced by the use of this powerful lixvivium, the leather will be more completely tanned, will weigh heavier, will be more solid and close, and be less subject to be soaked with water, and grow spongy, than leather tinned in the ordinary manner.
This lixivium may also usefully applied to cables, to all sorts of ropes, sails, canvass, and the tackle of ships, made from hemp, or flax: charged and impregnated with this principle, they will support a greater weight, obtain a greater strength, will wear longer and smoother than the common tanned rope or cable. It may be transported to all parts of the United States in a perfect state of preservation, and be at all times ready for use, either for tanning, or other purposes, and thus, supersede the use of bark in the ordinary way.
JOSEPH GILES.
JOHN PHELPS,
G. ARANS,
Witnesses.
Date of patent, April 11, 1825.
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, Jim Shaw's X-patent list, the Mirror of the Patent Office (1828), S. A. Elliot's printed list of patents, Burke's List of Patents (1847)
- The specification was printed in the Mirror of the Patent Office (1828).
- S. A. Elliot's printed list of patents gives the same name and date.
- Burke's 1847 Patent Office list gives the same patent.