Drawings and documents
National Archives restored drawings: drawing
M. and S. Pennock's Patent Drawing for a Horse Rake
National Archives, Restored Patent Drawings (Record Group 241) · Full-size scan at the National Archives · Catalog record
Show the text on the drawing Hide (98 words)
Words on the drawing as machine-read by the National Archives; not checked. Useful mainly for searching.
IVI / is / 56. HARVESTERS, / FOSH'S / Horse-Rakes / my S. Pennock / Drags. / HORSE BAKE: / CLASSIFICATION / 4672-4 / DIVISION. / PATENTED: J7FEB:J827. / 78 / at / References . / a Rake head. / Teeth / c. Pieces of timber / a Wheels / e Handles / f Round / 5. shafts. / to Upper scantling / 2 Lower do / Patent "fife m. 1839. / k. / 2. Board / Made under the of the commissioner of Satents, / m strips ofwedder slides. / n Staples. / in conformity with that 3d March 183% / o. Levers. / p. Ropes. / y. Hook to which the horse is geered. / bomm. of Patents.
USPTO scan
The patent as scanned by the USPTO
U.S. Patent and Trademark Office · Google Patents
Show the transcription Hide (127 words)
Machine transcription (LightOnOCR) of the pages as scanned by the USPTO, most of them the handwritten copies made when the records were restored after the 1836 fire. Not checked; it can misread handwriting, so compare it with the scan.
Page 1.
4672X
Mr. S. Pennock,
Horse Rake.
Patented. Feb. 17, 1827
Page 2.
United States Patent Office
PTO - BOYERS, PA Duty Station
MISSING PAGE TEMPORARY NOTICE
PATENT # 4672X FOR ISSUE DATE 2-17-1827
HAS BEEN SCANNED, BUT WITH MISSING PAGE(S). UPON RECEIVING OF MISSING PAGE(S), THE ENTIRE DOCUMENT WILL BE RESCANNED.
PLEASE CALL IMAGE DATA ADMINISTRATION STAFF OF 557-6154 IF YOU HAVE A QUESTION. ASK FOR DAVE GROOMS, ANITA YOUNG OR POLA JONES.
THIS NOTICE IS FOR THE MISSING PAGE CONTAINING:
COLUMN # All Text
Data Conversion Operation
Boyers, Pa
Published accounts: specification
Specification printed in the Mirror of the Patent Office (1828) with its plate
American Journal of Improvements in the Useful Arts, and Mirror of the Patent Office, vol. 1 (1828), printed p. 338 · View the page
Show the transcription Hide (805 words)
Text of the specification as printed in the Mirror of the Patent Office, machine-transcribed from the page scans (GLM-OCR); not proofread. Check the scan for figures and reference letters.
IMPROVEMENT IN THE HORSE RAKE.
By Moses and Samuel Pennock, of Chester county, Pennsylvania.
See Plate XXXIII, fig. 5.
The instrument as now improved, called the self discharging hay and grain horse rake, consists of the following parts, which as far as to the title "specification" is considered as belonging to the public, but which was necessary to be described, the better to understand the specification of the improvement herein after specified.
A long beam lying in a horizontal position, the dimensions of which may be varied at the option of the maker, but usually nine or ten feet in length and about three inches square, composes the head of the self discharging hay and grain horse rake. From the anterior side of the raKE head projects a row of pointed teeth about two feet in length, which may be made of iron or wood. At equal distances from the ends and on the inferior side of the raKe head are attached two pieces of timber which may be three and a half or four inches broad, and about two inches thick, and which project about ten or eleven inches backwards from the raKE head. The posterior ends of these pieces are mortised in such a manner as to admit the revolution of two small wheels about six inches in diameter,which are placed near the ends of these pieces and the axles of which pass through the jaws of the mortise near their outward extremities. Two handles of a convenient length for guiding the instrument are inserted in the head, and are joined by a round passing through them near the superior extremities. The round may be held in the hand when the machine is in use. On the anterior edge of the upper side of the raKE head, at equal distances from the ends are attached, by means of strong hooks and eyes, two shafts about three feet long and of convenient thickness, with broad bases curved towards the posterior ends, and the anterior ends mortised horizontally.
The discharger is a frame work composed of several pieces.
A piece of lath or scantling the dimensions of which may be varied, but usually about one inch and a quarter in thickness, and two inches and a half in breadth, lying horizontally on the ground, parallel and about equal in length to the head of the rake is connected to a piece of about equal dimensions by means of several studs, one near each end, another near the middle of the pieces.
These pieces are placed at the distance of about two or two and a half inches apart, more or less, according to the size of the teeth. The studs passing several inches through the upper piece become in continuation tenons, to which is fastened a board from half an inch to an inch in thickness, varying in breadth from four to six inches and equalling in length the pieces of scantling.
This board is made narrower in those parts over which the shafts are to work, and its edge is placed towards the pieces of scantling below, its broad side lying in the same plane with their anterior edges or sides. It is designed to assist in preventing the hay or grain gathered by the teeth, from falling over the head, as well as to aid in removing the mass collected upon the teeth of the rake.
To the superior side of the upper piece of scantling, and at equal distances from the ends are attached two strips of wood, the dimensions of which may be two inches in breadth by one inch in thickness, and which extend about twenty nine or thirty inches, more or less, in a posterior direction, and form slides.
These slides pass through two staples driven into the head of the rake opposite to the places where they are attached to the scantling. Through the posterior end of each slide a bolt is driven to prevent the slide from slipping entirely through the staple, and to keep the discharger from being drawn entirely beyond the teeth.
Connected with the anterior ends of the shafts, by means of a hinge, are two levers, about two feet in length. At the other ends of these levers are attached two chains or ropes, about twenty eight or twenty nine inches in length, which pass through holes in the outward extremities of the board before mentioned, and are connected to the upper piece of scantling.
To the middle of each lever is fastened a hook to which the horse that is to draw the machine is geared.
Date of the Patent, February 17, 1827.
Published accounts: journal notice
Notice in the monthly list of patents
Franklin Journal and American Mechanics' Magazine, vol. 4 (1827), p. 142 · View the page
In the hay, and grain, horse-rake; Moses and Samuel Pennock, Pennsylvania, Feb. 17.
Published accounts: journal notice
Notice in the monthly list of patents
Journal of the Franklin Institute, vol. 5 (1828), p. 62 · View the page
In the horse rake, for hay and grain; Moses & Samuel Pennock, East Marlborough, Penn. Feb. 17.
About this record
- Patentee
- Jim Shaw's X-patent list
- Date
- the Name and Date index of patents, USPTO records, Jim Shaw's X-patent list
- Invention
- the Name and Date index of patents
- Listed in
- the Name and Date index of patents, USPTO records, Jim Shaw's X-patent list, the Journal of the Franklin Institute, the Mirror of the Patent Office (1828), Burke's List of Patents (1847)
- A drawing was printed in the Mirror of the Patent Office (1828).
- The specification was printed in the Mirror of the Patent Office (1828).
- Burke's 1847 Patent Office list gives the same patent.