Drawings and documents
Published accounts: specification
Specification printed in the Mirror of the Patent Office (1828)
American Journal of Improvements in the Useful Arts, and Mirror of the Patent Office, vol. 1 (1828), printed p. 70 · View the page
Text of the specification as printed in the Mirror of the Patent Office, machine-transcribed from the page scans (GLM-OCR); not proofread. Check the scan for figures and reference letters.
Extract from the Specification of a new and economical method of using heated air, gases, elastic fluids, and products of combustion, which are available to the increase of steam power, by Minus Ward, Civil Engineer, Baltimore.
These consist in employing or using, in whole or in part, the air which is heated while passing through the fire of the furnace attached to the steam engine, together with the heated gases, elastic fluids, or products, set at liberty, or given out by the burning fuel in the same. By means of sundry appliances and machinery, which are added or affixed to the steam engine, to force or throw into the boiler, either below or above the surface of the water in the same, the aforesaid heated elastic fluids, or products of combustion, thereby causing them to mix or unite with the steam. Thus availing myself of the caloric and agents, which are ordinarily suffered to escape through the flue or chimney into the atmosphere, and are lost. This may be put into practice by an indefinite variety of methods.
One method is, to place a pneumatic forcing pump, which we will call the gas-pump, on the top of the boiler of the steam engine; a pipe, or tube, extends up from the furnace below, through the water and steam in the boiler, and enters the bottom of the gas-pump chamber, where there is a valve opening upwards. By the side of this valve, there is a valve opening downwards, into the cavity of the boiler. The piston of the gas-pump is driven by the engine. From the upper part of the boiler, commonly called the steam chamber, a pipe extends to the steam, or working cylinder of the engine, which cylinder is of a construction no way different from that of the steam engine in common use.
Operation.—As the piston of the gas-pump rises, the valve which opens upwards will be forced open by the laws of atmospheric pressure, causing the heated elastic fluids and products of combustion to follow the piston. The other valve being kept closed by the pressure of the steam in the boiler, the heated air, gases, and other heated products of combustion, rise from the burning fuel in the furnace, and passing up through the pipe and the valve, fill the chamber of the gas-pump; the cubic contents of which may be to those of the steam, or working cylinder, as 169 to 256, or thereabouts. On the descent of the piston, the inlet valve closes, and as soon as the descent of the piston, by compressing the heated air, gases, and other heated products of combustion contained in it, causes their elastic force to become greater than the elastic force of the steam in the boiler, the valve in the boiler opens, and the contents of the gas-pump are driven into the boiler, at a temperature nearly equal to what it was in the furnace; where, coming to an actual contact, and mixing with the steam, they give out a portion of their caloric to the steam, and the temperature of the mixture, will be higher than was that of the steam, before the injection of said gases. The increased temperature will cause a corresponding increase of the elastic force; the mixture of steam and other heated elastic fluids thus formed, passes on to the working cylinder of the engine, where, after acting by their pressure upon the piston of that cylinder, they are either suffered to escape into the atmosphere, or they are conveyed to a condenser, where the steam and aqueous parts of the mixture are condensed, in the same manner as steam in condensing engines. The water thus formed, the injected water, with the air, gases, &c. are pumped out together. The above arrangement of parts has been specified on account of the ease with which it may be understood.
Another modification is to immerse the gas-pump in the boiler with its upper flange upon the top of the boiler. A tube, open at both ends, extends from near the upper part of the steam chamber, internally down along the side of the gas-pump, and enters the bottom of the same. By this arrangement, as the piston of the gas-pump rises, the chamber below the piston will be filled with steam, and as no valves are placed in this tube on the ascent of the piston, this steam will be returned into the steam chamber; the use of this is to keep the packing of the gas-pump continually damp, so as to prevent its being burned. The inlet and outlet valves are placed upon the top of the pump, the piston rod working through a stuffing box; a tube extends from the outlet valve, to the steam chamber. The gas-pump may be also placed externally on the end, or side of the boiler, and be a double acting pump, with a pair of valves, as before described, at each end thereof. In this plan, an elastic metallic piston may be adopted; one method of making which is to substitute for the packing of hemp, a packing, or gasket of card-wire, which is applied in the same manner as the packing of hemp.
In the above methods, if it be intended to take into the gas-pump, a larger part, or the whole of the heated elastic fluids, and products of combustion, a damper, or valve, may be placed in the flue or chimney, above the tube leading to the gas-pump; which damper, after the engine is in operation, may be totally, or partially closed. If it be entirely closed, the draught and the consumption of the fuel in the furnace will be in proportion to the capacity of the gas-pump, and the number of strokes made by its piston in a given time.
About this record
- Patentee
- Jim Shaw's X-patent list
- Date
- the Name and Date index of patents, Jim Shaw's X-patent list
- Invention
- the Name and Date index of patents
- Listed in
- the Name and Date index of patents, Jim Shaw's X-patent list, the Mirror of the Patent Office (1828), S. A. Elliot's printed list of patents, Burke's List of Patents (1847)
- The specification was printed in the Mirror of the Patent Office (1828).
- S. A. Elliot's printed list of patents gives the same name and date.
- Burke's 1847 Patent Office list gives the same patent.
- Residence from Burke's 1847 Patent Office list; the standard lists give none.