Drawings and documents
Published accounts: specification
Specification printed in the Mirror of the Patent Office (1828) with its plate
American Journal of Improvements in the Useful Arts, and Mirror of the Patent Office, vol. 1 (1828), printed p. 331 · View the page
Show the transcription Hide (2,198 words)
Text of the specification as printed in the Mirror of the Patent Office, machine-transcribed from the page scans (GLM-OCR); not proofread. Check the scan for figures and reference letters.
By Jeremiah Price, Lockport, New-York.—See Plate XXXII.
Fig. 1, Plate 31, is a side view, and fig. 2 a ground plan of the same; this cart is made the same as the common carts, except the manner in which the tongue or pole is fixed to the axle, and likewise the manner in which the box is hung; so that it will turn on the axle like a pulley on its axle. A is the box, which is so hung, that, when it is full, the largest half of the weight is below the centre of the axle, so that it will keep the right side up by the weight of the box and its contents; the axle, where the box is hung on it, must be round, and then a round hole in each end of the box to play on the axle, to empty the earth out; there may be a lever nailed fast on one end of the box, or there may be two iron staples on one end to run a lever in and out at pleasure to turn the box by, B and B are gained in the axle then bolted, R R and R are gained in above, or below BBB, and bolted. The box may be made the shape of a half circle, like the dotted line S, and hung all below the axle or part above.
C, fig 2, is an apron made of thin boards, with two sides but no ends; the apron is made fast to the timbers E E, and is hooked to the cart and taken off at pleasure, by the hooks JJ. D is the scraper or team shovel, the chain of which may be hooked in a staple in the centre of a cross bar framed in E and E, near J, or there may be two chains one each side, to hook in staples driven in EE, near JJ. C and D, fig 1, is the apron and scraper. Now when the cart is drawn forward by the team, the scraper and apron is also drawn, and the scraper is loaded, then the team stops and the contents of the scraper are turned in the apron; then the apron is raised at the outer end, the other playing on the hooks JJ, till its contents are slid into the box or body of the cart. F, fig 1, is the apron raised. The apron may be raised by hand, or two followers, or otherwise; after thecart is loaded, the apron may be unhooked and hooked on other carts to load them while the first is gone to empty.
Figures 3, 4, 5, and 6, shew another plan for loading the cart. GG, fig 4, are skids framed together by cross bars and braces—fig 5 is an end view of them—they are hooked to thecart at pleasure as observed above—H is a wheel scraper or team shovel—the dotted line is the chain of the scraper which ishooked into the staple L, and the staple is fast in the cross bar of the skids. G and H, fig 3, is a side view of the scraper and skids. Now when the team draws the cart, the skids and scrapers are drawn also, and the scraper is loaded, then theteam stops,and one man each side ofthescrapertakesholdofthepinsIII,andruns thescraperuptheskidsandemptiesitscontentsintotheboxM, and so continues till thecartisloaded;thenthe skidsandscraper are used to load other carts while the first has gone to empty. As it requires more teams while the cart is loading than it does to draw it out, there may be an extra span of horses or oxen standing in the canal to hitch on at pleasure while the carts are loading.
N, fig. 6, is a view of the same box as is shown at O, fig. 8, to be filled with earth; P is the same skids as at G, fig. 3 and 4, one end of which lies on the ground, the other on the box; now the wheel scraper is loaded by a team (not connected with the skid) and drawn to the foot of the skids P, fig 6, and the chain is unhooked from the scraper, and the scraper is pushed up the skids upon its wheels, and its contents emptied into the box, and so continued until full. Common carts and wagons may be loaded in the same manner, and there may be a small windlass attached to the upper end of the skids for a rope to wind on, the other end hooked to the scraper, and so draw up the scraper by the ropes and windlass; and there may also be steps for a person to walk upon between the skids, and attached to the skids, and the skids may have rollers playing between, running from one skid to the other, or shorter ones; they may be placed from 12 to 16 inches apart; then the common scraper without wheels may be used to load carts in the same manner as above mentioned, with the wheel scraper, except the common scraper will run up the skids on the rollers.
Fig. 6, 7, 8, 9, 10, 11 and 12, show the plan of another cart, the axle of which may be turned over at pleasure, while the shafts or tongue is attached to it, so that by means of a band wheel like fig. 9, or a lever like fig. 12, it may be turned round and upon it, ropes or chains that may have attached to them large stones, stumps, logs, or a box of earth, and may be drawn away and lowered at pleasure.
Fig. 7 is the wheels and the axle, with the staples Q Q, to fasten the chain to. TT are gains cut all round the axle, and then the axle rounded in the gains, and may be rounded between the gains or not. In these gains the shafts are fixed to the axle.
Fig. 10 and 11 are two different plans to fix the shafts to the axle. The black line U, fig 10, is a strap of iron bent around the axle V, and made fast to the shaft W, by nails, screws, screw bolts, or key bolts, and the black lines at fig. 11 are also bars of iron made fast as abovementioned with the axle V, playing at the end of the shaft, and the spring X keeps the shafts from raising off of the axle; that spring may be omitted, and a screw or key bolt run through the two bars as a substitute for the two springs; in either way, the shafts may be taken off at pleasure.
Fig. 8 shews the felloe of the wheel and the square part of the axle, the box to carry earth, and the chain and staples to wind it up with. The hub and spokes are omitted to show the other parts more plainly. O, fig. 8, is the box for earth, the ground plan of which is not shewn, but its length is Plate 32.
Fig.1.
Fig.2.
Fig.6.
Fig.5.
Fig.3.
Fig.4.
Fig.g.
Fig.8
Fig.10.
Fig.11.
Fig.12
from one staple to the other at fig. 7, and is suspended by ropes or chains from the staples QQ Z,fig. 8, is the axle, the dotted line the chain, fig. 9, is a wheel in which the notch Y is cut, just the size of the axle next the hub, so that it may be slipt on to the axle at pleasure between the shaft and hub; then by means of the handles a a a a, the axle may be turned to wind up the load, the wheel, fig. 9, may be kept on the axle by two iron staples through which a spring key may be slipt to keep the wheel on, or with a mortise in the axle and a lever, the axle may be turned. Fig. 12 is another plan to turn the axle; let b be a lever, d d iron bars made fast on the lever, and let the iron bars be as far apart as the diameter axle, let the iron bars straddle the square part of the axle, so that turning, the lever will turn the axle. There may be two levers—by one, the axle may be held from turning, while the other is slipt on, and by means of one of these leivers, the axle is kept from turning while the load is carried out. By running a pin through the hole at b fig 12, into a hole that may be made in the end of the box, or by having a hook on the lever, to hook to a staple in the end of the box; or the lever may lie on top of the box. When a number of these carts are carrying earth from the canal, the wheel fig. 9, will do to wind up all the boxes that are loaded at or near the same place, or if the two levers are used—the same two leivers will do to wind up a number of the boxes; there may be extra boxes, so that the boxes may be loading while the carts are gone out. These within mentioned carts may have planks or joists laid on the slope of the canal, for the wheels to run on while loading, and so may carry heavy loads. The box O, fig 8, may have its bottom hung with hinges on one side, and a catch or spring on the other, which, when loosened, will let out its contents; or the box may be turned bottom side up by a slip lever as before mentioned, at fig. 1 and 2.
Carts, and the mode of loading with earth, have long been known, made and used in various ways. John Owing's plan for loading, is to have one or two scrapers hung with hinges to the front end of wagons, so that when the wagon is drawn forward, the scrapers are loaded and then turned backwards by levers in the wagon, then the scrapers and leivers are drawn out with the wagon while gone to unload; it is unloaded by hinge bottoms. I claim as my improvement for carrying earth, the manner in which the box or body is hung on the axle of the cart as represented in fig. 1 and 2, so that the box may be turned over and over at pleasure. There is now in use a drum to wind the fire engine hose on, which plays around the axle of the cart as the box above mentioned. I specifically claim, a box hung in that manner to be used in excavating and carrying off earth; it is unloaded by being turned bottom upwards. In the mode of loading carts, as represented in fig. 3 and 4, when the skids are wheel scrapers are used. I will mention, that skids have long been used for loading carts and wagons with many articles, and in many ways, and the application of wheels to the scraper has for some short time been known, and which is the improvement of one GIDEON DAVIS and myself, for which we have letters patent.
The scraper or team shovel without wheels has been applied to the loading of carts and wagons by Owing, of Baltimore, in the way above mentioned. But I specifically claim as my improvement, the mode of loading carts in the following manner, as it has not been known or used before, viz.
The attaching of the skids by hooks to the cart behind, as at fig. 3 and 4, with the wheel scraper attached to the skids, both to be drawn with the cart until the scraper is loaded; then to run the scraper up the skids on its wheels and empty its contents in the cart, and so do until the cart is loaded; then the skids and scraper are unhooked from the cart and hooked to another, while the first goes out to empty. In this way one pair of skids and one scraper will do to load a number of carts. And I also claim as my improvement in the mode of loading common carts and wagons, viz. The running of a scraper when loaded upon its wheels, up skids that may have one end lying on the side of wagons or carts to empty the earth in them. I claim not the lying of the skids on the side of the wagon or cart; but do claim the discovery of running the scraper upon its wheels up the skids to empty its contents into the cart or wagon.
N, fig. 6, is a box to be filled with earth, and P are skids upon which the wheel scraper may be run upon to load the box; this box may be suspended under the axle of the cart, seen at fig. 7 and 8, and so carried out and emptied. The wheel scraper has been used to carry earth from one place to another on the ground, both up hill and down, but has not been used to load carts end wagons in the manner which I above claim as my improvement.
Date of the Patent, May 18, 1827.
Published accounts: journal notice
Notice in the monthly list of patents
Journal of the Franklin Institute, vol. 5 (1828), p. 65 · View the page
In carts for removing earth; Jeremiah Prince, Lockport, N. Y. May 18.
About this record
- Patentee
- Jim Shaw's X-patent list
- Date
- the Name and Date index of patents, Jim Shaw's X-patent list
- Invention
- the Name and Date index of patents
- Listed in
- the Name and Date index of patents, Jim Shaw's X-patent list, the Journal of the Franklin Institute, the Mirror of the Patent Office (1828), S. A. Elliot's printed list of patents, Burke's List of Patents (1847)
- A drawing was printed in the Mirror of the Patent Office (1828).
- The Franklin Institute's journal spells the name differently.
- The specification was printed in the Mirror of the Patent Office (1828).
- S. A. Elliot's printed list of patents gives the same name and date.
- Burke's 1847 Patent Office list gives the same patent.