Drawings and documents
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 3 (1829), p. 405 · View the page
2. For a Lamp, and ingredients for burning therein; Isaiah Jennings, New York, March 3.
Remarks. The ingredients proposed to be burned in this lamp, are, 1st, oil, mixed with spirits of turpentine, three parts of the former, and one of the latter; 2nd, rosin, or turpentine, mixed with oil, one part rosin, or turpentine, and seven parts oil, or other grease; 3d, any kind of hard grease, mixed with oil, by heating them together, in sufficient quantities to bring it to a soft state. The lamp to contain the oil, or composition to be burnt, is either a spherical, or other formed vessel of glass, with two perforations; one below, for the admission of the tubes upon which the wick is placed, and one above, for the flame and heated air to pass through. The lower opening may be an inch and a quarter in diameter; into this is fitted a perforated cork, through which passes a tube & of an inch in diameter, capable of sliding, or screwing up or down, through the cork. This tube may reach to the centre of the spherical glass, or may be passed up so as to be even with the top opening, of 2 inches in diameter, and surmounted by an ordinary burner. The tube may be made of brass, and on it is to be slipped loosely, a circular, or tube wick, which shall stand even with its top. A second tube, formed of earthenware, soap-stone, or any other imperfect conductor of heat, is then dropped over the wick. This tube is perforated in many places, to allow the oil, &c. to pass readily to the wick, and extends up to the height of the brass tube. When the flame is to be increased, the inner tube is to be depressed, so as to stand below the top of the outer tube. There is no contrivance for raising the wick, the depression of the inner tube, it is affirmed, producing a similar effect. "What I claim as my invention, is, a tube passing through the bottom of the lamp, to be raised and depressed by a screw, or otherwise; the method of placing the wick even with the top of the tube; the tubes, or noses, of materials that are called non-conductors' of heat; and the compound ingredients for burning in the lamps."
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 3 (1829), p. 406 · View the page
3. For a machine for Packing Cotton Bales, Tobacco Hogsheads, &c. &c.; Tyre Jennings, Statesburg, South Carolina, March 3.
Remarks. This press is worked by a long lever, the centre of which forces down a follower, under which the article to be pressed is placed. In the actual press, this lever is stated to be 67 feet long, and to project beyond the frame of the press, 30 feet on each side: these arms are to be operated upon alternately. Strong cross bars extend horizontally from one side of the frame of the press to the other, like the rounds of a ladder. The fulcra of the lever are formed by passing moveable pieces of timber between these bars, above the top of the lever, on each side of the shaft of the follower, alternately. These pieces may be placed nearer to the centre of the lever, as the pressure proceeds, and it becomes necessary to increase the power. The lever, from its great length, requires to be braced, or trussed, or its elasticity would interfere materially with its action. The whole structure appears to us to be extremely inartificial. The constant removal of the cross timbers, on either side, as the follower ascends, or descends, requires too much manual labour, and that of a kind which it is inconvenient to perform, and which would scarcely be resorted to excepting where slave labour was principally depended upon. The same principle, under a much more convenient arrangement, is known to mechanicians, as applied to the press. Within the cheeks of the two upright posts of the frame of a press, are fixed iron racks; and upon the lever there are catches which take into the teeth of these racks, so as alternately to form fulcra, as the arms of the lever are drawn down. The patentee claims the whole machine, as described by him.
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- Burke's 1847 Patent Office list gives the same patent.