Drawings and documents
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 3 (1829), p. 410 · View the page
When used, the Cromamometro is to be placed on the piano forte, or other instrument, and with one hand the person strikes, simultaneously, the key of the cromamometro and piano; the moveable bridge being adjusted, successively, to each note on the scale; after which, nothing remains but to tune the remainder of the instrument by octaves. 10. For a machine for Straight and Spiral Reeding and Fluting; John January, Greenville, Kentucky, March 3.
Remarks. This machine, which is intended to reed and flute bed posts, &c., is constructed much like some of the machines for cutting the grooves in rifle barrels. A bench is made, somewhat like a lathe, having between proper heads a cylindrical piece of wood, upon which may be cut straight or spiral grooves. A sliding frame has at one end a guide piece, which takes into one of these grooves, and at the other a cutter, which operates upon the piece to be wrought, this being so attached as to be carried round by the motion of the grooved cylinder; there is, of course, a dividing plate, and other necessary appendages. The general arrangement is claimed.
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 3 (1829), p. 411 · View the page
11. For a Press for Cider, and other purposes; Daniel Reed, Easton, Bristol county, Massachusetts, March 3.
Remarks. This press bears a strong resemblance to some others which we have seen, both patented and unpatented. Two upright cheeks are framed into sills. Two levers, which are drawn down by means of ropes, or chains, from two windlasses on the outside of the cheeks, force down two plungers, or sliding blocks, which act upon the pressing plank, or follower. As this is forced down, it is kept in its place by palls, or catches, which take into a rack within each cheek of the press. There is a third windlass, with ropes, for the purpose of raising the levers, and thus taking off the pressure. The claim is to the general arrangement.
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 4 (1829), p. 60 · View the page
Room containing 3000 cubic feet. Four-tenths of 3000 is 1200, the number of square inches in the front opening. This gives a fireplace 41.3 inches wide, and 29 inches high, with a mouth of 240 square inches, and a throat of 120 square inches, and a flue above the throat, of 120 square inches; the throat above the mouth, 5 inches. Specification of a patent for new applications, or improvements, in the art of making Cut Nails by machinery, being improvements on a machine for which letters patent were issued to Jesse Reed, in the year eighteen hundred and seven. Also of the application or new method of feeding Nail Machines by Machinery, where the plate is Turned. THOMAS ODIORNE, Malden, Massachusetts, April 3, 1829.
Remarks. THE new applications, or improvements, which I have made, on Jesse Reed's said machine, are as follows. Dispensing with several cumbrous and expensive parts of said machine, I, nearly on a level with the gripping dies, extend two solid and substantial arms from the sides of the stationary jaw, and embracing the moving jaw; and across the extreme ends of said arms, at the back of the moving jaw, I apply an eccentric arbor, so formed as, at a revolution, to give timely motion to the several parts of the machine, in the act of cutting, gripping, and heading the nail. On the back end of said arbor, I hang the balance, or fly wheel, and the pulley for the band. I hang the forcing slide box by a strip of steel attached to the back of it, and passing through a groove in the jaw behind the moving cutter, is connected to an upright axle, so that the box may play, as on a hinge. I have also varied the mortise for the stationary cutter, making it like that in the moving jaw, reversed, or open, on the back side; so that I place the cutters into each jaw alike, and secure them in like manner. I head the nail by means of a small lever exclusively for that purpose, in a manner similar to the old way; but it receives its motion from a cam on the main arbor, while the heading set is vibrated by another cam one way, and by means of a spring the other way. In respect to the feed the feeding of the machine, my invention, application, or improvement, consists, principally, in what I call a circularly vi brating rack rod, operated upon by moveable spring catches, pressed towards the cutters of the nail machine by a separate spring, which is forced back and let forward by a vibrating wedge. The means by which I effect the proper and timely motion of the above mentioned parts of the feed, are as follows. I fix upon the crank, or main arbor of the nail machine, a small pinion, matched by a cog wheel, twice its diameter, which I hang upon the gudgeons of a small crank, connected by a tie, or pitstaff, to the arm of an arbor at one end, which arbor passes through the centre of a friction wheel at the other end, and a loose friction bar, kept in contact with the sides of said wheel by a stiff spring pressing against its centre, so that the bar moves with the wheel. At each end of this bar, I fasten a strap, and attach the other end of each, on opposite sides, to a pulley, supported by a standard, through the centre of which pulley the rack rod passes, as also through a moveable ring that holds the catches, so that as the friction bar plays back and forth, circularly, the rack rod which holds the nippers and plate, vibrates each way half round the wedge, letting the plate into the cutters, alternately.
About this record
- Patentee
- Jim Shaw's X-patent list
- Date
- the Name and Date index of patents, Jim Shaw's X-patent list
- Invention
- the Name and Date index of patents
- Listed in
- the Name and Date index of patents, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- Burke's 1847 Patent Office list gives the same patent.