Drawings and documents
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 3 (1829), p. 413 · View the page
15. For Machinery to be used in Navigation, chiefly applicable to the propelling of ships, and other floating bodies, and some of which improvements are also applicable to other purposes; Adolph Heilbronn, New York, March 16.
Remarks. This patent is for an improvement on the paddle wheel; for an advantageous mode of applying human power to the working such wheels; and for an improvement by means of which vessels are to be prevented from making so much lee-way as usual. This patent we shall hereafter present more at large than we are now prepared to do, and, probably, with illustrative engravings.
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 4 (1829), p. 194 · View the page
This machine consists of two latches, and two catches, one pair of them to fasten the shutter, when open, against the wall, the other to secure it to the sill when closed. A particular description we should deem superfluous, as the contrivance possesses no great novelty. It will, undoubtedly, answer the purpose equally well with fifty others, patented and unpatented, which have been offered to the public, and probably better than several of them. SPECIFICATIONS OF AMERICAN PATENTS. Description of an Improved Wheel with Revolving Paddles, applicable to the propelling of Ships and other floating bodies. Patented by ADOLPH HEILBRONN, New York, March 16th, 1829.
Remarks. (WITH A COPPER-PLATE.) In the patent of Mr. Heilbronn, several different improvements in navigation are described and claimed; in the present article, we shall explain the first of them only, but shall hereafter present the others, having a plate prepared for that purpose. These various inventions have been perfected in conjunction with a gentleman in England, where a patent has also been obtained for them. The revolving motion given to these paddles, differs altogether from that which has been contrived with a view to their dipping into, and emerging from the water vertically. The paddles, or buckets, in Mr. Heilbronn's wheel, are each fixed upon an arm which radiates from the centre of the wheel, as may be distinctly seen by a reference to the engraving. In a wheel so constructed, the paddles may be made to enter the water edgewise, and be turned, so as to act upon it at any point which may be preferred. The paddles which are out of the water, are all feathered, or turned edgewise, so as to experience but little Improved Wheel with Revolving Paddles. resistance from the wind, and to require a very shallow box or casing, to protect them on each side of the boat. A wheel of this description may be immersed in water to any depth which may be required; or it may be entirely under water, where the depth is sufficient; should such a mode of fixing it be thought adviseable, the progress of the boat will be but little impeded thereby. - One great advantage anticipated from these paddles, is the avoiding of those numerous and perpetual concussions produced by the striking of the water by the ordinary floats, which causes a continued, distressing, and very injurious tremulous motion. They enter by their edges, and are gradually brought into action. The number of revolving paddles to be used, will be best determined by experiment. Figure 1, plate 2, represents one of the said wheels of eight arms or paddles, as it appears when in a finished state, and as applied to the side of a vessel; and figure 2 is a view on a larger scale of the central part of the said wheel, as seen from the opposite side, or that nearest to the vessel, for the purpose of showing how the paddle-arms are held and supported in their places, and yet permitted to turn or feather at the proper instant, while the whole wheel turns round; and figure 3 is a section of the same part of the paddle-wheel, as is shown by figure 2, and likewise of the piece GG, which is called the wiper carriage, which is immoveably fixed to the side of the vessel, for the purpose of producing the turning or feathering of the paddles at the proper moment. In these several figures A A A A, is a circular disk or plate of cast-iron, having a rim or ring B в В, rising on one side to a sufficient height to give strength and solidity to the said circular plate, and also to take the brasses CCC, through which the paddle-arms or axes DD D D, are permitted to turn. The central block of metal E may be cast in one piece with the disk or plate, but will be better detached, and afterwards fixed to it by screw bolts, as shown in the section figure 3, because when detached, the brass sockets, or steps a a a a, for receiving the inner ends of the paddle-arms or axes, can be more accurately bored and fixed. The disk or plate A A A A, with its centre block E, forms the central part of the paddle-wheel, which must be firmly keyed, or otherwise fixed upon the main shaft F F, which derives its rotary motion from any power applied within the vessel, and this shaft also passes freely through the centre of the metal wiper carriage G, which is firmly and immoveably fixed to the side of the vessel, for the purpose of operating upon the wipers or projections bb of the paddle axes, in order to produce the turning or feathering of the paddles. To effect this, the outer face of the wiper carriage presents two annular surfaces, as seen at cand d in figure 4, (which is a front view of it,) and a part of one of them is cut away as at e e, to a greater or less extent, according to the period at which it may be desirable to make the paddles turn or feather. The wipers or projections on the axes of these paddles are projections of steel or other metal, crossing each other so as to project at right angles from the axes of the paddles, and as these wipers come into contact with one or other of the Improved Wheel with Revolving Paddles. annular surfaces c and d, figure 4, and also seen in figure 2, the several paddle axes will each make a quarter turn or revolution. Thus the five wipers z z z z z, figure 2, lie with their flat surfaces upon the annular surface c of the wiper carriages, but that surface is cut away between e and e, (as is more distinctly seen in figure 4,) and the inner annular surface d then presents itself, and acts upon the wipers z z to turn them round; consequently the inner wipers y y y will now assume the flat position, and will continue in it, until they are again brought by the motion of the wheel, into contact with the ends of the outer annular surface с. It will thus be seen, that by enlarging or contracting the opening e e, figure 4, and with it the inner annular surface d, that one, two, or more, of the paddles may be made to stand at right angles to all the rest, and thus that any number of paddles may be made to move through the air, and to enter into and come out of the water with their thin edges forward, while the remainder, or those that are under the water, will remain steadily in that position in which they are most effective for the purpose of propelling, as is distinctly shown by the manner in which the paddles are arranged round the wheel, as shown by figure 1. It will be necessary to employ springs to prevent the blow and concussion, which would otherwise take place between the wipers on the axes of the paddles, and the ends of the wiper carriage upon which they strike, and by which they are turned round; and the best application of such springs, is to use those of the spiral kind, of considerable strength, and to introduce them into round holes very nearly fitting them, and drilled in the ends of the wiper carriage which first comes into contact with the wipers. The spring being introduced into the hole, a cylinder of hard steel just fitting the hole is placed upon it, and there fixed by a pin driven through a chased mortise hole in the said cylinder, in such manner that the said cylinder can fall wholly into the said hole when pressed upon, but without such pressure, will project about half an inch or rather more out of the said hole; and as the said wheels are so fixed as to require cases to protect them, as in ordinary steam-boats, such cases may be formed of light iron work, covered over with slight iron bars, or with strong wire work, because such open work cases do not offer the same resistance to the wind and water as close boarded cases do; and moreover, they have the effect of much more effectually breaking the force of the waves when they drive against them. Bars or rods with points upon them are also fixed to the insides of such cases, causing the said points to come as nearly as possible to the paddles and paddle axes without touching them, for the purpose of clearing off any weeds that may attach to the paddles, and likewise to protect them from striking against any timber, ice, or other floating substances, by which the paddles of steam-boats are frequently broken or injured. The claims of the inventor, in the paddle wheel and its appurtenances, are, First, to the frame work, or wheel, as above described, for holding the patent paddles. Secondly, the introduction of springs to act upon the wipers. Thirdly, the paddle box made of open wirework, net, or cross bars, with projecting pieces, or points, to clear the paddles.
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 4 (1829), p. 412 · View the page
Description of a new mode of applying the power of men to cranks, for turning paddle wheels, and for other purposes; and also for a rudder to be applied to the bow, and of warps to the keel of a ship or other vessel, for the purpose of diminishing lee-way. Abstracted from a patent granted to Adolph Heilbronn, of New York, March 16, 1829.
Remarks. (WITH A COPPER-PLATE.) THE obtaining of the greatest power, or force, from man, for turning the improved paddle wheels, (described p. 194.) or for other purposes, is proposed to be effected by compound cranks, to be operated upon and turned by the hands, and the weight of the body, at the same time, the feet being applied to treadles properly placed and connected to the cranks. Figures 1 and 2, of plate V, are views of the cranks, QQ being the bearings, or pivot, upon which they turn. Figure 1 is a crank to be worked by the simultaneous motion of both the hands of a man moving in the same direction, and figure 2 is a crank likewise for both the hands, but by which greater power is gained; because now the hands move in opposite directions, and oppose each other's force. In figure 1, both the hands are to be applied to the straight bar H; and I, J, are two treadles like those of a foot-turning lathe, each treadle being separate, and hinged to the floor, or to proper framing. Each treadle is connected by a connecting rod or strap ll, as in a lathe, to the two smaller cranks above them, marked K, and L, which form part of the large crank, and are bent in the same plane with it. The person working the machine stands upon the treadles, his left foot being upon the treadle I, and his right foot on that marked J, consequently his whole weight is transferred to them. When, however, he transfers the weight of his body on to one leg only, one short crank will be pressed down, and the other will be at Specifications of American Patents. liberty to rise. In the mean time, the power of his two hands is to be applied to the bar HH, to urge its descent, until it reaches its lowest point, at which times, the short crank K will be in its most elevated position, and after passing the top centre line will begin to descend, at which moment the pressure of the right foot upon the treadle J must be released, and the whole weight of the body thrown upon the left foot and treadle I, while the two hands employed in raising the bar HH, from its, now, lowest position, and so on until the said bar arrives at the highest position in its rotation, when the weight of the body must be again thrown on to the treadle J, and so on alternately. The crank shown in Figure 2 is the same in principle as Figure 1, but is to be preferred for more powerful action, being stronger, because it has a central bearing at QQ, in addition to its two end ones; and instead of the two hands moving constantly in the same direction, the left and right hand cranks are diametrically opposite to each other, consequently when one hand is down the other will be up; and while one is pushed forwards, the other must be drawn inwards, and vice versa; consequently whenever one arm is pushing, the other will be pulling in an exactly opposite direction; from which circumstance a much greater degree of strength and exertion can be used than in other positions of the body. The short, or foot, cranks in this figure are, each of them, opposed to the longer, or hand, cranks, and are to be connected to treadles as before described, and to be used in the same way. This improvement is equally applicable to a sitting position, like that of rowing a boat, as shown at Figure 3; which shows one of the means by which this action may be brought about; a, b, c, being a crank like that shown at Figure 1, c and f the treadles, now fixed in a vertical, instead of a horizontal, position, and gg, the connecting rods when the large crank is in its upper position and is to be drawn inwards, or towards the body of the man at work, the operation, excepting as to direction, being similar to that already described. In order to prevent ships and vessels of all kinds from making so much lee-way, as they usually do, an apparatus, partly in the nature of a rudder, is applied to the head, instead of the stern, of the vessel, but differently worked; and certain additions are made to the keels of vessels, which may be used either together or separately. The new head rudder is to be fixed to the head of the vessel in the same manner as a common rudder is fixed to the stern, or in any other substantial and convenient way. The common rudder is worked, and acts, as usual; the only difference between the head rudder and the common rudder is, that the common rudder requires to be very frequently moved by the helmsman, while the head rudder is much more stationary, seldom requiring to be shifted in its position, and that principally when the vessel moves upon a new tack, or has any alteration made in the position of her sails. Figure 4 is a representation of the plan of a vessel fitted with the head rudder; A is a tiller placed over said rudder, instead of behind it, and moved by the side tackles B and C, and are kept steady by the tackle D, which leads from the bowsprit. With a view to produce a still greater Specifications of American Patents. resistance to the wind, certain contrivances are applied to each side of the keel of a vessel, which are called keels of resistance, or wings, and are shown at Fig. 5.-These wings may be made of solid wood, cork, or such like light material, but making them hollow, and of cast iron, or other metal plates, in such way that the water may flow through them, is preferred, in which case they are denominated keel tubes. Fig. 5 shows a vessel in an inclined position, and i, j, k, l, is a section of the keels of resistance, or wings, which are applied to both of the sides of the ordinary keel of the vessel, in such form and manner, that when the said vessel lies gunnel to, the side i, of the keel of resistance, may stand just perpendicular to the horizon, and consequently in the most favourable position for resisting the passage of the opposing water under the vessel, which is, of course, taking the direction shown by the arrow, and, if it were not for the wing, would pass away without any material interruption.
About this record
- Patentee
- Jim Shaw's X-patent list
- Date
- the Name and Date index of patents, Jim Shaw's X-patent list
- Invention
- the Name and Date index of patents
- Listed in
- the Name and Date index of patents, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- The Franklin Institute's journal spells the name differently.
- Burke's 1847 Patent Office list gives the same patent.