Drawings and documents
National Archives restored drawings: drawing
John Thorp's Patent Drawing for a Can Spinner
National Archives, Restored Patent Drawings (Record Group 241) · Full-size scan at the National Archives · Catalog record
Show the text on the drawing Hide (37 words)
Words on the drawing as machine-read by the National Archives; not checked. Useful mainly for searching.
118. SPINNING. / P / - / [142] Throstles & Caps. / CLASSINGATION / d John Thorp's / 5431-X / Can Spinner / DIVISION / Patented 3 april 1829. / O/R / (foom Palent)
USPTO scan
The patent as scanned by the USPTO
U.S. Patent and Trademark Office · Google Patents
Show the transcription Hide (132 words)
Machine transcription (LightOnOCR) of the pages as scanned by the USPTO, most of them the handwritten copies made when the records were restored after the 1836 fire. Not checked; it can misread handwriting, so compare it with the scan.
Page 1.
No Printed Specification Available
5431X
J. Thorp.
Spinning.
Patented Apr. 3, 1829.

Page 2.
United States Patent Office
PTO - BOYERS, PA Duty Station
MISSING PAGE TEMPORARY NOTICE
PATENT # 5431X FOR ISSUE DATE 4-3-1829
HAS BEEN SCANNED, BUT WITH MISSING PAGE(S). UPON RECEIVING OF MISSING PAGE(S), THE ENTIRE DOCUMENT WILL BE RESCANNED.
PLEASE CALL IMAGE DATA ADMINISTRATION STAFF OF 557-6154 IF YOU HAVE A QUESTION. ASK FOR DAVE GROOMS, ANITA YOUNG OR POLA JONES.
THIS NOTICE IS FOR THE MISSING PAGE CONTAINING:
COLUMN # All Text
Data Conversion Operation
Boyers, Pa
Published accounts: specification
Specification printed in the Journal of the Franklin Institute
Journal of the Franklin Institute, new ser., vol. 4 (1829), p. 69 · View the page
Text of the specification as printed in the Journal, from OCR; not proofread.
Specification of a Patent for an improvement on the "Can Spinner," consisting of a sheath or case to surround the cup or can. Granted to JOHN THORP, Providence, Rhode Island, April 3, 1829. THIS improvement consists of a sheath or case, to surround the cup or can, and is intended to prevent the yarns from interfering, as they revolve round their respective cases, confining the yarn within a smaller space than it would otherwise require; also, to produce a friction on the yarn, so that it will wind tighter on the bobbin than it otherwise would do. This friction is occasioned by the centrifugal force of the yarn, pressed against and being dragged around the inner surface of the case. To increase said friction, a lining of velvet, or wash leather, or cloth, or any other suitable substance, should be cemented to the inner surface of said case, with paint, varnish, or any other suitable cement. The case is open at each end, and its length may be nearly the whole length of the can: it is made of tin, sheet iron, brass, or any other suitable substance, and may be formed into its proper shape, by bending it round the can which is to accompany it; and should be as much larger than the can, as will leave a space between the outer surface of the can, and inner surface of the case, large enough for the yarn to revolve in. The two straight and perpendicular edges of the case, should lap by each other about three-eighths, or a quarter of an inch, leaving a space between the two lapped edges, sufficiently large for the yarn to pass through from the outside of the case, to the can; which will save the trouble of taking the case off from the spindle in mending or piercing the yarn, when the broken end remains below the can, as is represented in the drawing which accompanies this specification, and which is intended to illustrate the same. The cases have on the backside of them a projecting lip, or piece, which is soldered, or otherwise attached to them, by which they are confined to a rail or bar, that extends along the common frame, back of said cases. I not only claim the exclusive right of using the above described case in my Can spinning, but in all kinds of spinning, where it may be useful. Reference to Fig. 6, Plate 1. JOHN THORP. A, The can with a knob, or ball, at the top, by which it is held in lifting the can from the spindle. B, the whorl which is connected with the bobbin, which bobbin is within the can. C, the spindle, on the top of which the can rests. D, D, The sheath, or case, surrounding the can. The patentee states that he has found all the various plans which he has tried, to spin without the use of a flyer, to answer the purpose anticipated, but that there is, of course, a choice between them; he has, therefore, in practice, adopted two of them; one for spinning warp and filling, and another for hard twisted yarn for thread, twine, &c. We shall publish in the next number, some other improvements in the manufacture of cotton, by the same gentleman, the engravings for which are now in preparation.
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 4 (1829), p. 49 · View the page
17. For an improvement in the Can Spinner, for which a patent was obtained Nov. 25th, 1825; John Thorp, Providence, Rhode Island, April 3, 1829.
Remarks. VOL. IV. No. 1.-JULY, 1829. 7 This will appear with Mr. Thorp's other improvements, a part of which are in the present number.
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 4 (1829), p. 69 · View the page
To find the end of the yarn when broken, the plate is lifted up, and the end of the yarn taken from the bobbin below the plate, and the plate being open in front, the yarn is then passed through it to the cap; or the cap may be lifted for the purpose of mending, or piecing the yarn, in which case the plate may be bolted to the vibrating rail, and need not be open in front, as represented in the drawing. The wood cut in the margin, represents the cap when constructed in the manner best suited for spinning on a common throstle bobbin, or a bobbin with two heads. In this the cap is taken off, for the purpose of mending, or piecing the yarn, as above described. Specification of a Patent for an improvement on the "Can Spinner," consisting of a sheath or case to surround the cup or can. Granted to JOHN THORP, Providence, Rhode Island, April 3, 1829.
Remarks. THIS improvement consists of a sheath or case, to surround the cup or can, and is intended to prevent the yarns from interfering, as they revolve round their respective cases, confining the yarn within a smaller space than it would otherwise require; also, to produce a friction on the yarn, so that it will wind tighter on the bobbin than it otherwise would do. This friction is occasioned by the centrifugal force of the yarn, pressed against and being dragged around the inner surface of the case. To increase said friction, a lining of velvet, or wash leather, or cloth, or any other suitable substance, should be cemented to the inner surface of said case, with paint, varnish, or any other suitable cement. The case is open at each end, and its length may be nearly the whole length of the can: it is made of tin, sheet iron, brass, or any other suitable substance, and may be formed into its proper shape, by bending it round the can which is to accompany it; and should be as much larger than the can, as will leave a space between the outer surface of the can, and inner surface of the case, large enough for the yarn to revolve in. The two straight and perpendicular edges of the case, should lap by each other about three-eighths, or a quarter of an inch, leaving a space between the two lapped edges, sufficiently large for the yarn to pass through from the outside of the case, to the can; which will save the trouble of taking the case off from the spindle in mending or piercing the yarn, when the broken end remains below the can, as is represented in the drawing which accompanies this specification, and which is intended to illustrate the same. The cases have on the backside of them a projecting lip, or piece, which is soldered, or otherwise attached to them, by which they are confined to a rail or bar, that extends along the common frame, back of said cases. I not only claim the exclusive right of using the above described case in my Can spinning, but in all kinds of spinning, where it may be useful. Reference to Fig. 6, Plate 1. JOHN THORP. A, The can with a knob, or ball, at the top, by which it is held in lifting the can from the spindle. B, the whorl which is connected with the bobbin, which bobbin is within the can. C, the spindle, on the top of which the can rests. D, D, The sheath, or case, surrounding the can.
About this record
- Patentee
- Jim Shaw's X-patent list
- Date
- the Name and Date index of patents, USPTO records, Jim Shaw's X-patent list
- Invention
- the Name and Date index of patents
- Listed in
- the Name and Date index of patents, USPTO records, Jim Shaw's X-patent list, the Journal of the Franklin Institute
- The residence comes from the Franklin Institute's journal.