Drawings and documents
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 4 (1829), p. 173 · View the page
9. For an improved Cotton Gin; Stephen T. Conn, New York, June 11.
Remarks. The roller cotton gin consists of two rollers, about sixteen inches in length, which are made to turn something like the rollers of a flatting mill. The seed cotton being forced against these, the cotton is drawn through the rollers, and the seed left behind. Such rollers, it is stated, become heated in use, sufficiently to set fire to the cotton. The improvement claimed is to the making them hollow, so as to admit air freely, which, the patentee avers, will obviate this objection. If desired, a current of air, or even of water, may be made to pass through them.
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 4 (1829), p. 181 · View the page
32. For an improvement in the form of Boxes for the Wheels of Post Coaches, Carts, Wagons, and other Carriages; called the "Cylindro-conical, Self-wedging, or Self-fastening Box;" Thomas Mussey, New London, Connecticut, June 11.
Remarks. This is one of those simple and obvious improvements, which, when once presented to us, excites our surprise that it should not have been made long ago. The improvement is upon the form of the exterior of the cast-iron boxes in common use. These have, heretofore, been cast tapering on the outside, as well as within, but in the reversed direction, and they have been so made, because, in this form, the pattern, in casting, would readily deliver from the mould. When thus cast, the smaller, or front box, has its exterior diameter smallest at the end towards the centre of the hub, or nave; the consequence of which, is, that the least start, after it has been driven into its place, loosens it in every part, and it readily comes out. The larger box, on the contrary, has its larger diameter towards the centre of the nave, and cannot, therefore, be driven into its place, but must, necessarily, be secured by wedges, which are very apt to work out. The patent boxes are made perfectly cylindrical on their outsides, with the exception of a small distance from the end which is first to enter, where they are sufficiently tapered, or chamfered, to prevent their cutting the wood before them. The ears, or projections, which are to prevent the boxes from turning, are made sharp on their inner ends, and, when driven, force their own passage way.
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 4 (1829), p. 186 · View the page
45. For a mode of Applying Heat, by means of Iron Castings and grates, connected together, and adapted to the uses of cookery, or otherwise, and set in a fire-place; called a 'Fire-place Furnace;' Peter E. Sanburn, Troy, Rensselaer county, New York, June 11.
Remarks. This is a kind of flat, cast-iron, box, made to fit a fire-place, and having an upper plate, upon the middle of which the fire is to be built. In the centre, just under the fire, there is to be an enclosed iron drawer, in which articles to be baked may be placed, whilst kettles, &c. may be hung over the fire, as in the ordinary fire-place. The ends of this cast-iron box, beyond the centre drawer, have their upper parts formed of bars, or grating, and may have placed upon them any cooking utensil. How these are to be heated from below, we do not perceive.
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 4 (1829), p. 200 · View the page
There are in the above so many items, that we cannot attempt to animadvert upon them; the patentee has made a complete rail-road and rail-road carriage analecta: it is, however, fairly to be apprehended, that a number of his claims will be disputed by other inventors; and indeed this has been already done. Some of the claims appear to be for intended improvements, which are now patented in anticipation, and several others, we suspect, will not fulfil the averment that they are new and useful. Admitting, however, that every thing claimed is new, useful, and original, the question may fairly be asked, whether there is a sufficient connexion in all the things claimed, to make them properly the subject of a single patent. Half a dozen new machines, or improvements upon half a dozen old ones, can scarcely be included under the terms a "new and useful art, machine, manufacture, or composition of matter." Specification of a patent for an "Improved Rope-maker." Granted to STEPHEN HILLS, 2nd, Glastonbury, Connecticut, June 11, 1829.
Remarks. THE Size of the machine may be varied, according to the bigness of the rope, rigging, or twine, to be made. That for common rope, or rigging, is about six feet square, on a frame. On one end are three spindles standing perpendicularly, with spools and flyers attached to them, and driven by a belt, or gear. On the opposite side is one spindle standing also upright, with spool and flyers driven by a belt or gear, cross banded, or contrariwise from the three first mentioned spindles; this takes up, with a heart motion, the rope, or twine, as fast as laid. All the spindles are moved by a horizontal wheel in the centre of the machine, and may be turned by hand, horse, or water power. Three threads pass between two rollers placed above the wheel, from the three first mentioned spindles, and pass from thence to the one spindle mentioned last as standing alone.
About this record
- Patentee
- the Journal of the Franklin Institute, Journal
- Date
- Jim Shaw's X-patent list, Burke's List of Patents (1847)
- Invention
- the Name and Date index of patents
- Listed in
- the Name and Date index of patents, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- The sources give different dates; the date shown is the one most of them agree on.
- The patentee's full name comes from the Franklin Institute's journal.
- The residence comes from the Franklin Institute's journal.
- The Franklin Institute's journal confirms the date shown.
- Burke's 1847 Patent Office list gives the same patent.