Drawings and documents
National Archives restored drawings: drawing
John Thorp's Patent Drawing for a Running Cap Spinner
National Archives, Restored Patent Drawings (Record Group 241) · Full-size scan at the National Archives · Catalog record
Show the text on the drawing Hide (136 words)
Words on the drawing as machine-read by the National Archives; not checked. Useful mainly for searching.
2g / 118. SPINNING. / [142] Throstles & Caps. John Thorpe / Vol. 8.7.17 / /2- / Bobbins Running Shinoles cap spinner / Patented 13th June 1829 / 5536-+ / I' / I' / Fig1 / Fig3 / Fig2 / OH / Eig.4. / References. / A Cap. B pins on inside of Capu. / c body of bobbin D. head of bobbin. / E yarn wound on bobbin. / F Sprin of to keep head of boblin up against yarn. / G mortises in bobbin. / H screw to hold cap onspindle. I friction ring. / FD / I'guide wire. K. Spindle. Invibrating rail. / Fig.1. Section of spunner. / Fig.3. bobbin detatched. / Fight fricton ring detatched. / Rarm spring. s.cloth. / Ny / olR / Is / 9-hdelt delt / Patent Office 20. April 1841 / Made under the direction of the Commipiour / of Patents in in conformity with act 3 March 1837 / Commificationer of Patents
USPTO scan
The patent as scanned by the USPTO
U.S. Patent and Trademark Office · Google Patents
Show the transcription Hide (139 words)
Machine transcription (LightOnOCR) of the pages as scanned by the USPTO, most of them the handwritten copies made when the records were restored after the 1836 fire. Not checked; it can misread handwriting, so compare it with the scan.
Page 1.
No Printed Specification Available
NO PRINTED SPECIFICATION AVAILABLE
5536X J. Thorpe.
Bobbin and Spindle.
Patented Jun. 13, 1829.
Fig. 1.
Fig. 2.
Fig. 3.
Fig. 4.
Page 2.
United States Patent Office
PTO - BOYERS, PA Duty Station
MISSING PAGE TEMPORARY NOTICE
PATENT # 5536X FOR ISSUE DATE 6-13-1829
HAS BEEN SCANNED, BUT WITH MISSING PAGE(S). UPON RECEIVING OF MISSING PAGE(S), THE ENTIRE DOCUMENT WILL BE RESCANNED.
PLEASE CALL IMAGE DATA ADMINISTRATION STAFF OF 557-6154 IF YOU HAVE A QUESTION. ASK FOR DAVE GROOMS, ANITA YOUNG OR POLA JONES.
THIS NOTICE IS FOR THE MISSING PAGE CONTAINING:
COLUMN # All Text
Data Conversion Operation
Boyers, Pa
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 4 (1829), p. 129 · View the page
We propose to construct the staves, or slats, of wood, cast-iron, or wrought iron, according as the one or the other shall be found best to answer the purpose; their width, thickness, and form, may also be varied; the number of rollers, likewise, may be increased. VOL. IV. No. 2. - AUGUST, 1829. AMOS SALISBURY. JOHN C. LANGDON. 17 Specification of a patent for an improvement in Spinning Cotton Yarns and Roping, which improvement is called "THORP'S RUNNING CAP SPINNER." Granted to JOHN THORP, of Providence, Rhode Island, June 13th, 1829.
Remarks. THIS improvement in constructing the machinery for spinning, and in spinning cotton yarns and roping, consists of a short conical, running cap, the shape of which is similar to that of a tunnel with its nose downwards, hung and supported at the top of a live or running spindle. The use and functions of this cap, are, to keep the yarn and roping at a proper distance from the bobbin; also, to direct and distribute it thereon. The yarn is not connected with the cap, as in the common flyers, but it is allowed to revolve around the surface of said cap, yielding to the resistance of the atmosphere, causing it to fall back of the cap, and wind on the spool or bobbin, the lower edge of the cap being the guide. The cap should be placed near to the guide wire, so that as little length of the yarn or roping as possible be exposed to the atmosphere. The nose, or shank, of said cap is penetrated by the top of the spindle, which nicely fits it, and is held fast to its place by a screw, or a pin and slot, similar to the common method of fastening a bayonet to the end of a musket, or by a catch like that of a bit stock, or in any other suitable way. The following dimensions are suitable for spinning, on a weaver's, or shuttle bobbin; and when other bobbins are used, the dimensions must be varied to suit them. The whole length of the cap, from the top of its nose, or shank, to the lower edge of its conical part, or brim, should be about two and three-quarter inches, and the length, or depth, of the conical part about one inch. The diameter of its brim should be about an inch and one-quarter. The hole, or cavity, of said cap, after leaving the conical part, should be larger than the bobbin shaft, (which is hereafter described,) and continue of an equal diameter about the distance of an inch and a quarter, in which the top of said shaft will traverse, and the remainder of the nose above is nicely fitted to the top of the spindle, as above described. At the top of the conical part of its cavity are fixed a set of pins, say four, projecting inwards, so that their ends reach the spindle, for purposes hereinafter described. The thickness of the cap should be about the eighth of an inch; said cap may be made of iron, or any hard suitable metal. The spindle, and its situation in the frame, is like that of the common throsel, receiving its motion from the same source as that of the throsel spindle. The length of the spindle above the upper bearing, may be according to the desired length of the bobbin, which for a common shuttle, or weaver's bobbin, ought to be about seven inches. 'The bobbin (the body or shaft of which is a tube of thin sheet iron, or brass, or tin, or, may be, wood,) traverses on the spindle, and turns with it. Said shaft is smooth on the outside, and its head moveable on its body. The upper end of said body, or shaft, which will remain in the cap, has in it four slots, or mortises, extending down and running parallel with the spindle; in these mortises the aforesaid pins traverse; or, in other words, the mortises give liberty for the bobbin to traverse on the spindle. The pins assist in crowding, or pressing, the yarn or roping down the bobbin; they also compel the bobbin to turn with the spindle. In the commencement of filling the bobbin, the head is slipped up to the top of its body, (which will be in the cap,) and by means of a spring fixed in the head, and crowding against the body, holds said head wherever it is placed.
Published accounts: journal notice
Notice in the monthly list of patents
Journal of the Franklin Institute, new ser., vol. 4 (1829), p. 187 · View the page
50. For an improvement in Spinning, called the Running Cap Spinner, intended for spinning cotton yarns, and roping; John Thorp, Providence, Rhode Island, June 11.
About this record
- Patentee
- Jim Shaw's X-patent list
- Date
- the Name and Date index of patents, USPTO records, Jim Shaw's X-patent list
- Invention
- the Name and Date index of patents
- Listed in
- the Name and Date index of patents, USPTO records, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- Burke's 1847 Patent Office list gives the same patent.