Drawings and documents
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 4 (1829), p. 416 · View the page
First. A ball, stationary, being struck by another ball of equal weight and magnitude, moving with a force equal to F, both balls shall move on with a force equal to F. Where is the vis inertiæ in the ball struck? It may be answered thus: that it was consumed in opposing the vis inertiæ inherent in the ball moving, and by which Vis Inertiæ. that ball resisted any power tending to stop it, with a force equal to that exerted, in overcoming the vis inertiæ of the ball struck. That is to say, then, that the vis inertiæ is destroyed, that it no longer exists in these balls. Let us now suppose one of these negative balls proceeding with its force F, strikes another ball, stationary, of the same size and weight, What is the consequence? Why both balls proceed to move with a force equal to F. Do they not? Then, with or without a vis inertiæ the effect is the same. As we can only judge of any power by the effect which it is capable of producing, where there is a non-entity of effect--it is vain to look for entity of power. But supposing we have gone too far in saying that in the latter case, above, the vis inertiæ ceases to be an active principle in the ball moving, it only the more directly establishes our final inference. For if the forces after each impulse are divided into F, F, and so on, would they not be so divided if there were no such thing in nature as a vis inertiæ? Here we again encounter the horrors of our original dilemma, which again throw us immediately upon the same conclusion, that nonentity of effect is equivalent to nonentity of power. And further, let us follow up this division of forces, and see where it leads us. If it be necessary, in the first place, to defend the existence of the visinertiæ, to admit that the principle is inherent, and continued in every mass of matter, whether stationary or moving, and that the counteracting forces in those cases when first opposed, destroy each other, and that thence it is that no visible effect is produced; then of course we may continue to make theoretically in the instance of the balls continually communicating the original impulse, an ad infinitum division of forces, without ever arriving at a point where the vis inertiæ shall exert itself, or cause a cessation of action. How then can we contend for the existence of such a power in nature? Let us consider it in another light. No one who contends for the vis inertiæ, we presume, refuses to admit that the standard whereby is to be estimated the quantity of this power, existent in any mass of matter, is the gravity of that matter. Now it is an axiom in theoretical mechanics, that the greatest conceivable mass of matter may be moved by the least conceivable force. Suppose then that it were required, by means of a lever, to overcome a weight of 1,000,000 lbs. by a weight of 1 lb. Now, if the lever were inflexible, the fulcrum a point, and friction nothing, would the long arm of the lever for that purpose require to be more than 999,999 times the length of the shorter arm? Where then is the vis inertiæ in the larger mass? The only answer to be made here, is, that the vis inertiæ being a property inherent in all bodies, all principles in mechanics, where matter is considered, necessarily involve the consideration of the vis inertiæ. But this is taking a new ground entirely untenable, and is at once paramount to denying the existence of a certain principle in matter, independent of gravity and opposed to motion, acting with a certain power, to be considered abstractedly in mechanical effect, with friction, &c. If then our deductions are correct, if this principle is not shown, VOL. IV. No. 6. - DECEMBER, 1829. 53 Elasticity, &c. of Hammered and Rolled Iron. nor cannot be proved to exist, either theoretically or practically, by any effect produced in the determination of matter acting under the established laws of nature, then a power having no effect is a practical, if not a logical absurdity. Let scientific gentlemen, therefore, explode a term from their writings which is unmeaning, and only tends to obscure science and lead to erroneous conclusions. I shall take the liberty of closing this communication, by quoting the following extract from a letter of Dr. Franklin's to Mr. Hopkinson, which gives a case in point, and which I think is very happily conceived. "Suppose two globes equal to the sun and to one another, exactly equipoised in Jove's balance-suppose no friction in the centre of motion, in the beam or elsewhere: if a moschetto then were to light on one of them, would it not give motion to them both, causing one to descend and the other to rise? If it is objected that the force of gravity helps one globe to descend, I answer, the same force opposes the other's rising. Here is an equality that leaves the whole motion to be produced by the moscheto, without whom these globes could not be moved at all. What then does vis inertiæ do in this case? and what other effect could we expect if there was no such thing? Surely, if it were any thing more than a phantom, there might be enough of it in such vast bodies to annihilate so small a force by its opposition to motion!" A subscriber, and lover of truth. Chesapeake and Delaware Canal Line, Sept. 28, 1829.
Remarks. A. A. D. Elasticity, Ductility, and Strength of Hammered and Rolled Iron. THE following are the principal results obtained by M. Lagerhjelm, with great care, and the use of a very complete and powerful apparatus:1. Rolling always gives the same iron the same uniform density. Hammered bars of the same iron are often of different densities, and frequently contain scales. 2. Rolling does not twist the fibre of the bar: hammering sometimes does. 3. The measure of elasticity is the same for both hammered and rolled bars; but the limit of elasticity (measured by the greatest weight which the bar can support for a given sectional surface, without any permanent change of form) is greater for hammered than for rolled bars, if neither have been refolded; but if they have been refolded, the limit of elasticity is increased, and becomes the same for both. 4. Rolling gives more ductility to iron than hammering. 5. Cohesion appears independent of the process employed, and is the same for both. 6. The lengthenings and shortenings (both of which follow the same laws) are not proportioned to the forces which draw or compress a bar of iron in the direction of its length. 7. Elasticity is not changed by tempering. 8. Very different forces are required to produce the same perSmoke Disperser.-Indelible Ink, or Dye. manent change of form in a brittle and a soft iron. 9. The limit of ductility being taken as the length which a bar a foot long will increase by, from the state of unaltered elasticity until the moment of rupture, the most ductile iron experimented with was found to give for its limit of ductility 0.27 of the original length, and 0.722 of the original section. 10. The cohesion is the same for brittle or soft iron, fibrous or not fibrous: so that the absolute strength of iron appears to depend upon its ductility. 11. The volume of the metal increases as the bar is drawn apart; and the specific gravity of the iron at the broken surface is less nearly by 0.01 than that of the same iron taken from an unaltered part of the bar. 12. When the iron is extended, preparatory to its fracture, heat is evolved: the heat is greater for soft than for harsh iron. Sometimes a bright spark appears at the moment of rupture. [Bull. Univ. E. x. 42. Smoke Disperser of M. Millet. A REPORT upon this apparatus, made by M. Derosne, speaks favourably of its powers. The apparatus is simple, consisting of a kind of tub pierced with a great number of holes, having the burs outwards. It has been taken into practice by many persons. In order to prove its efficacy, one of them was fixed on the top of the funnel pipe of a stove, and a very close, smoky fire made below. By means of a ventilator, an artificial wind was then made to strike directly and powerfully on the smoke disperser for the purpose of driving the current downwards and making the stove smoke; but neither by this, nor even additional means, could any effect of the kind be produced. The committee could not explain the effect, except by supposing that the cylindrical form of the apparatus presenting only a small surface to the action of the wind was favourable, and that the form of the small apertures in this cylinder, occasioning a great number of contrary currents, produced almost a perfect neutralization of the force of the wind. Whatever may be the cause, the apparatus offers a cheap and effectual remedy for smoky chimneys, when this fault in them is dependent upon the pressure exerted by winds upon the upper aperture of the flue. [Bull. Soc. Enc. Indelible Ink, or Dye. By M. BRACONNOT. WHILST engaged in experiments on the production of deep brown colours for dying, at an economical price, MM. Braconnot and Parisot were led to examine the nature of the products obtained by the calcination of various organic substances with potash. These results were found to vary with the substances used: thus, when matters containing but little azote were employed, only little colour could be fixed upon fabrics, and that easily removable by alkaline soluNotice. tions; but when such substances as flesh, skin, and horn were employed, more permanent and deeper colours were obtained. Suspecting that this difference might be due in part to the sulphur present in these bodies, sulphur was purposely added, and then a deep chesnut brown dye was procured, more permanent than any other of the kind known in the arts. This immediately led to the preparation of an indelible ink, which was prepared in the following manner:-20 parts of Dantzic potash were dissolved in boiling water, and 10 parts of tanned leather parings, in small pieces, with five parts of sublimed sulphur, added; the whole was boiled to dryness in an iron vessel, then heated more strongly with continual agitation, but avoiding ignition, until the whole became soft; then a proper quantity of water was gradually added, and the whole filtered through a cloth. In this way a very dark coloured liquor was procured, which may be preserved for any period in close vessels, and which ought to be retained in well corked vessels, constantly excluded from the air; this presents no difficulty to its use, for a pen full is sufficient to write a couple of quarto pages. It flows much more freely than ordinary ink, does not embarrass the pen with insoluble matter, and resists chemical agents in such a way as to merit the title of indelible ink. Paper written with it, when subjected to the action of a boiling solution of potash, or strong sulphuric acid, or strong nitric acid, was nearly destroyed, whilst the characters remained unimpaired. Being first immersed in a mixture of chloride of lime and muriatic acid, and then for twenty-four hours in caustic potash solution, which was ultimately boiled to dryness, still the letters were very distinct. Weaker actions than these could of course do no harm, stronger could hardly be devised.
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 5 (1830), p. 28 · View the page
14. For making Bit-stocks of Composition; Augustus Phelps, Marlborough, Hartford county, Connecticut, October 10.
Remarks. The following is the specification: "The bit-stock is composed of cast-iron and brass. The main, or lower part, is of cast-iron, the head and neck, or top part, of brass. The principle and operation of said bit-stock are the same as those that are now in general use." We have known bit-stock of cast-iron, with heads of wood, sheetiron, brass, or copper, for more than thirty years. Many hundred of them, made in imitation of the celebrated Scotch stocks, have been imported from England, and the purchaser has frequently found, to his cost, that his iron stock has broken by a fall from his bench, and that it was not in the power of the smith to weld it. We can assure the inventors, or discoverers, of cast-iron hammers, tire, horse shoes, stocks, &c. &c., that they have been so completely forestalled by the English in the art of casting all those articles which ought to be made of wrought iron, as scarcely to leave room for any new discovery upon the subject.
DATAMP: illustration
Illustrations from DATAMP
DATAMP (Directory of American Tool and Machinery Patents), via the Internet Archive · Archived DATAMP page
About this record
- Patentee
- the Journal of the Franklin Institute, Journal
- Date
- the Name and Date index of patents, DATAMP
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- The patentee's full name comes from the Franklin Institute's journal.
- Burke's 1847 Patent Office list gives the same patent.