Drawings and documents
Published accounts: specification
Specification printed in the Journal of the Franklin Institute
Journal of the Franklin Institute, new ser., vol. 5 (1830), p. 380 · View the page
Text of the specification as printed in the Journal, from OCR; not proofread.
Specification of a patent for an improvement in the Frame Bridge. Granted to GEORGE W. LONG, of the United States Army, Fort Jackson, Louisiana, March 10, 1830. THE object of the invention is to acquire great strength in a bridge by means of a frame work, which may be analogous to a given solid beam of such a shape as to support the greatest possible weight, when in a horizontal position: assuming that figure which will make it equally strong throughout. For such a beam of uniform width that which is semi-eliptical in its longitudinal direction possesses this property: and the invention here claimed consists in arranging a frame work to possess this property of the solid beam; or rather to acquire great depth, and consequently strength of beam, by having the frame so supported by posts and braces as to be firm and unyielding to a weight placed on it; by which can be obtained such strength as will answer for bridges of two or three hundred feet span. The bridges now in use involving in any degree the principles of this invention are of different kinds; the most common, are a combination of the arch and frame constituting a crooked beam; and a late invention by Lt. Col. S. H. Long, of the United States Engineers, which is a straight beam; the ends and centres being the same in depth. All of the bridges here referred to differ entirely in the arrangement of the timbers and shape, from the invention here claimed and set forth. The improvement in question consists in the reduction of a framed beam to the most simple and mathematical form, and such that it will contain no superfluous weight of material, and that each timber of the frame shall receive a portion of stress to support any weight placed on the bridge: and further, that this stress shall be in the longitudinal or strongest direction of them, either in thrust or tension. The form of the framed beam may be an elipse, a segment of a circle, or a triangle. The former is here assumed to explain the principles and mode of construction, which are as follows, and which are to be the same in each of the cases. The framed beam consists, 1st, of a string piece made of one timber, or if more, they are to be joined with straps of iron so well bolted LONG's Improvement in the Frame Bridge. through the timber as to make the joint as strong as the other parts of the string. The string extends the whole length of the span. 2nd. A set of posts, at convenient distances apart, are made to rest on the string, and made fast to it by straps of iron passing under it and well bolted to the bottoms of them. They are to be notched at the bottoms on each side, transversewise of the bridge, to receive sills on which the sleepers and flooring are to rest. The tops of the posts are to be furnished with small mortises on either side, the same as the cuts for the sleepers, to receive timbers which are to be supported between them. They are also to be notched under these mortises, on the outer sides from the centre, to receive the tops of the braces which are to stiffen and resist the crush of the bridge. 3d. A set of timbers joining the tops of the posts which are held in their places by small tenons and mortises. In the beam, they are to represent the upper edge or last point of fracture in a section. 4th. The braces are a set of timbers placed diagonally between the posts, all inclining inwards. The foot of each brace rests on the string near the bottom of each post, except the centre, and the brace then inclines to the top of the next inner post. It is to be cut with square notches at either end so as to receive any pressure it will bear, and not weaken, too much, the head of the post and the string piece. By these braces any weight placed on the bridge, which comes upon the posts, is distributed throughout the frame. A single-way bridge will require two of these beams, and a double-way, three. The sills, as before stated, are to rest on shoulder notches cut in the posts. They may also be so notched as to allow the two, to each set of posts, to come together and be trenailed, or clamped, tight to the posts. They are also to project over the sides of the bridge far enough to receive braces to stay the posts in their upright position. The posts must also be joined across the bridge at their tops by small timbers, which, with the last named braces, will render the bridge sufficiently stable. The sleepers and planking are to be laid as in ordinary flooring. The bridge should also be furnished with side railings, which may be made as fancy may require. The material for construction may be wood, or iron, or a combination of the two. The strings may be of iron, and also ties, in opposite diagonals to the braces of iron, may be substituted for the braces. If a chain is used for the strings, an inverted position of the bridge may be assumed, in which the chain becomes the part corresponding with upper timbers in the other case, and a similar reversed position will also take place in the other timbers. It will be seen that a weight placed on a bridge of this description causes a stress throughout all of its timbers in their strongest directions; thus making it a strong and economical mode of construction. It possesses the great advantage of containing no more material than is directly applied to give strength; as well as its being the most plain work of carpentry. The saving in expense of piers and abutments, not required to resist a thrust, must also be counted a material advantage, especially on soft and mealy soil. A further benefit claimed in the framed beam, is its use for supportPERKINS' Paddle for Propelling Vessels. ing the roofs of houses or public buildings; by which a room of one or two hundred feet can be roofed without other supports than the walls. A model ten feet long, 18 inches high, of 14 inch cypress timbers, supported fourteen men, whose weight amounted to 2140 lb. مل GEORGE W. LONG. Fig. 1. T T 本 B A B PB P B P B P S 2 2 i 2 PLAN OF THE ELIPTICAL FRAME BRIDGE. Explanations of the above plan. Fig. 1 is a side view of the bridge. Fig. 2 is a vertical section through the centre posts. S, S, &c. are strings, Figs. 1 and 2. P, P, &c. are posts, Figs. 1 and 2. i, i, &c. Straps of iron attaching the posts to the strings, Figs. 1 and 2. B, B, &c. are the main braces, Fig. 1. T, T, &c. timbers bracing the heads of the posts apart, Fig. 1. L, the sill of the bridge, Fig. 2. s, s, &c. are the sleepers, Figs. 1 and 2. F, is the flooring. b t P P Fig. 2. b L A, a joint in the string secured by straps of iron well bolted to the timbers, Fig. 1. b, b, braces. tcross piece to steady the frame, Fig. 2.
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 5 (1830), p. 366 · View the page
15. For an improvement in the Frame Bridge; George W. Long, of the United States Army, Fort Jackson, Louisiana, March 10.
Remarks. (See the specification.)
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- Burke's 1847 Patent Office list gives the same patent.