Drawings and documents
National Archives restored drawings: drawing
Charles Daniels' Patent Drawing for a Machine for Cutting Screws and Gimblets
National Archives, Restored Patent Drawings (Record Group 241) · Full-size scan at the National Archives · Catalog record
Show the text on the drawing Hide (122 words)
Words on the drawing as machine-read by the National Archives; not checked. Useful mainly for searching.
6.2 Metal / 82. METAL WORKING. / 7. TURNING, PLANING, & MILLING. / $2. / [100] Milling. / Charles Daniels / 5894-X / cutting screws of I'mblets. / Vol. 10 pg 541. / Patented Marel 30. / Tide view of buzz / Front viewot buzz. / Top virw,of the wedge with hole for the forew k / Reference a the bed. b the buzy C.C. poppet head. d the gimblet. e vice. of the carriage ggthe standards. / h serew on the vice. K. serew on which the carriage turns. l the wedge. m the handle n band and whire. / 0 the crank / Patent affice December 7.1841 the / made under the direction of the Commissioners Intents / in conformity with acr of 3? march 1837 / nd Summith / Commissioner of Patents.
USPTO scan
The patent as scanned by the USPTO
U.S. Patent and Trademark Office · Google Patents
Show the transcription Hide (994 words)
Machine transcription (LightOnOCR) of the pages as scanned by the USPTO, most of them the handwritten copies made when the records were restored after the 1836 fire. Not checked; it can misread handwriting, so compare it with the scan.
Page 1.
No Printed Specification Available
C. Daniels.
5894X Milling Machine. Patented Mar. 30, 1830.
THE GRAPHIC CO. PHOTO-LITH. 39 & 41 PARK PLACE, N.Y.
Page 2.
Charles Daniels assignee of Wm. Southworth
Letters Patent. (Patented March 20, 1830.)
The Schedule referred to in these Letters Patent, and making part of the same, containing a description in the words of the said Charles Daniels, himself, of his improvement in a Machine for cutting the seams of kimblets, which invention he has assigned in due form of Law to Charles Daniels, of Saybrook, Middlesex County, Connecticut, which assignment is recorded in the Patent Office in the Book of Transfers, Pages 254 & 255.
Be it known, that I, Charles Daniels, of the Town of Saybrook, in the County of Middlesex and State of Connecticut, have constructed, made, and applied to use a new and useful improvement in a Machine for cutting the seams of kimblets, as invented and suggested by William M. Southworth (whose right and interest is herein after assigned to me); and that the following is a full and exact description of the construction and operation of the said Machine as improved by said Southworth and myself.
This Machine is generally placed upon a bed or basement of wood two feet long, eight inches wide and three inches thick. The buzz arbor is placed about two inches from the back side and left hand end of the bed, in two poppet heads, with suitable boxes to sustain it about three inches above the top of the bed. This arbor is made of cast steel, with suitable points or ends to run in the before mentioned boxes, is about eight inches long, and one half an inch in diameter, with proper shoulders or collars to receive the buzz, which is placed about two inches from the right hand end between the collars upon the arbor. This buzz, which should be made of hard cast steel, from one to three inches in diameter, and three eighths of an inch thick, with its periphery turned to form two cutting parts or edges at suitable distances from for cutting the double seam of a kimblet at one and the same operation.
The kimblet to be cut is placed in a vice similar to a goldsmith’s or watchmaker’s vice, to which vice a screw is connected which plays nearly horizontally and in a direct line with the kimblet through two standards or poppet heads raised from the carriage at suitable height to receive the screw about one and a half inches above the carriage bed. This screw must have a thread when it passes through the right hand standard.
Page 3.
or propel head as close as equal to the doubled edge of the hugg or a double thread by the power in the gimblet. It is now to guide and propel the gimblet or power it forward & backward while cutting. The carriage bed is about nine inches long, five inches broad & three fourths of an inch thick, & is made to turn up, a pivot or screw which is placed about one inch from the back side, & three inches from the right hand end of the bed. This pivot or screw fastens the carriage to a wedge of the same length & width as the carriage bed, and about three inches thick at the right, & one and a half inch at the left end, causing an inclination of the carriage to the bed, and should be placed upon the main bed at a suitable angle to bring the threads of the gimblet about square with the hugg.
(This machine) may be put in motion by any convenient power being applied to a band leading over a small wheel on the left hand end of the hugg axle, & the operator applying his right hand to a crank upon the right hand end of the pivot screw shaft, & his left hand to a handle fixed to the front corner of the left hand end of the carriage, to bring the gimblet in contact with the hugg.
What I claim as new & by virtue of said William M. Southworth’s assignment to me, as my own invention or discovery in the above described machine, for the use of which, I ask an exclusive privilege, is the application of the double edged hugg, by which both screws of a gimblet may be cut at the same time, & by the same operation.
In testimony whereof, I have hereunto set my hand & seal this 22 day of February A.D. 1830.
(Witnesses)
Julia S. Homedieu
Joshua S. Homedieu
Charles Daniels
(184 words)
Whereas I, William M. Southworth, of Laybrook, in the County of Middlesex & State of Connecticut, claim to have invented an improvement in the art of cutting the screws of gimblets by means of a double hugg or a hugg with two edges made & applied in the manner described in the foregoing specification, and in consideration of five dollars received to my full satisfaction, of Charles Daniels of said Town of Laybrook, do for myself, my heirs & legal
Page 4.
representatives hereby sell, convey & assign unto the said Charles Daniel, his heirs and assigns, all my right, title & interest, in the aforesaid invention; also, all the right, title & interest, which I have exclusively to the Machine described in the aforesaid specification or any part thereof; also all my right, title, & interest, which I have exclusively to improving, using & vending the same.
In testimony whereof, I have hereunto set my hand & seal, this 23rd day of February A.D. 1830.
Witnesses
Julia S. Hommedieu
Joshua S. Hommedieu
Mrs. M. Southworth
(Not)
(Recorded Seventh day of November 1840. by Eyd. M. C.)
Published accounts: journal notice
Notice in the monthly list of patents
Journal of the Franklin Institute, new ser., vol. 5 (1830), p. 375 · View the page
1 40. For machinery for Cutting the Screws of Gimblets; Charles Daniels, assignee of William W. Southworth, Saybrook, Middlesex county, Connecticut, March 30.
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP, USPTO records
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, USPTO records, Jim Shaw's X-patent list, the Journal of the Franklin Institute
- The National Archives' catalog gives the name differently.