Drawings and documents
National Archives restored drawings: drawing
William Manning's Patent Drawing for a Mowing Machine
National Archives, Restored Patent Drawings (Record Group 241) · Full-size scan at the National Archives · Catalog record
Show the text on the drawing Hide (89 words)
Words on the drawing as machine-read by the National Archives; not checked. Useful mainly for searching.
Entered / HARVESTERS, / Mowers, / Thrust Out." / 2- / William Manning / CLASSIFICATION / Mowing Machine, / 6539-X / Patented 3May 1831. / DIVISION. / References. / Fid.1.Perspective view of Machine / Fid.2. Hubof when showing groove I / A, Anletree, B. shopts c,amus. Deropbar. / E, teeth Fenthers. Glever. H.pin,I. zig zaggrove+ / Fig.1. / Fig.2. / Pated Office mar in th 1842 / Made under the direction of the Commissioner of Patult / C, / in conformity with actof of Cougrep 3 March 1837 / n2 Ellonoth / Commisioner of of
USPTO scan
The patent as scanned by the USPTO
U.S. Patent and Trademark Office · Google Patents
Show the transcription Hide (615 words)
Machine transcription (LightOnOCR) of the pages as scanned by the USPTO, most of them the handwritten copies made when the records were restored after the 1836 fire. Not checked; it can misread handwriting, so compare it with the scan.
Page 1.
W. Manning.
Mower.
Patented May 3, 1831
6539X

References.
Fig. 1. Perspective view of Machine.
Fig. 2. Hub of Wheel showing groove I
A, Axle tree. B, Slits. C, Arms. D, Cross bars.
E, Teeth. F, Cutters. G, Frame. H, Pin. I, Zig zag groove.
Page 2.
UNITED STATES PATENT OFFICE.
WILLIAM MANNING, OF PLAINFIELD, NEW JERSEY.
IMPROVEMENT IN GRASS AND GRAIN CUTTING MACHINES.
Specification forming part of Letters Patent dated May 3, 1831
To all whom it may concern:
Be it known that I, WILLIAM MANNING, of Plainfield, New Jersey, have invented an Improved Machine for Cutting Grass and Grain; and I do hereby declare that the following is a full and exact description of the construction thereof.
I provide an axle-tree with two wheels of the common construction. To this axle-tree I attach shafts, by which a horse is to draw the machine. From the axle-tree extend two arms in the direction of the shaft. These arms are mortised into or otherwise attached to the axle-tree. They are of greater length than the shafts, extending beyond them a sufficient distance for the cutting apparatus to be entirely clear of the horse. The two arms are united together by a cross-bar at their extreme ends, which cross-bar, when the machine is in action, rests and slides forward on the ground. Teeth of six or eight inches in length, more or less, are set like rake-teeth, standing forward on the cross-bar. These are made slender and for the purpose of holding the grass or grain to be cut. The cutters stand immediately above the teeth and receive a traversing motion in a way to be presently described. A flat bar of iron lies along upon the cross-bar, and the cutters are to be attached to this upper bar. The cutters are spear-shaped and are sharpened on each of their edges. They may vary in their length and width; but ordinarily they may be about six inches long and three or four wide at their bases. The grass or grain, which is held up by the teeth, passes between these knives or cutters. To give a traversing motion to them a lever may extend from the inner end of the hub of one or both of the wheels to the cutter-bar. This lever may work upon a pin at or near its center. A zigzag groove in the hub or in a wheel attached to it will give it a vibratory motion, and its connection with the cutter-bar at the opposite end will cause that to traverse. I intend sometimes to make the cutters revolve instead of traversing. They are then to be fixed upon the periphery of a wheel, the teeth being placed upon a fixed semicircle. The cutters will then have one sharp edge only. The wheel may be made to revolve by bands or gearing from one of the main wheels in various ways. When the machine is small it may be moved by the power of a man. The shafts may be fixed forward of the cutters and the general arrangement be varied without altering the main principle of my machine.
What I claim as my invention, and for which I ask Letters Patent, is—
The combined action of the teeth and cutters, whether the cutters are moved in a traversing or revolving direction.
WILLIAM MANNING.
Witnesses:
THOS. P. JONES,
JAS. ANDREWS.
Published accounts: specification
Specification printed in the Journal of the Franklin Institute
Journal of the Franklin Institute, new ser., vol. 8 (1831), p. 195 · View the page
Text of the specification as printed in the Journal, from OCR; not proofread.
Specification of a patent for an improved Machine for Cutting Grass and Grain. Granted to WILLIAM MANNING, Plainfield, Essex county, May 3, 1831. I provide an axle tree with two wheels, of the common construction. To this axle tree I attach shafts, by which a horse is to draw the machine. From the axle tree extend two arms in the direction of the shafts; these arms are morticed into, or otherwise attached to the axle tree; they are of greater length than the shafts, extending beyond them a sufficient distance for the cutting apparatus to be entirely clear of the horse. The two arms are united together by cross bar at their extreme ends; which cross bar, when the machine is in action, rests, and slides forward on the ground; teeth of six or eight inches in length, more or less, are set like rake teeth, standing forward on the cross bars. These are made slender, and are for the purpose of holding the grass or grain to be cut. a The cutters stand immediately above the teeth; and receive a traversing motion in a way to be presently described. A flat bar of iron lies along upon the cross bar, and the cutters are to be attached to this upper bar. The cutters are spear shaped, and are sharpened on each of their edges. They may vary in their length and width, but ordinarily they may be about six inches long, and three or four wide at their bases. The grass or grain which is held up by the teeth, passes between these knives, or cutters. To give a traversing motion to them, a lever may extend from the inner end of the hub of one or both of the wheels, to the cutter bar; this lever may work upon a pin at or near its centre; a zigzag groove in the hub, or in a wheel attached to it, will give it a vibratory motion, and its connexion with the cutter bar at the opposite end, will cause that to traverse. I intend sometimes to make the cutters revolve instead of traversing. They are then to be fixed upon the periphery of a wheel; the teeth being placed on a fixed semicircle. The cutters will then have one sharp edge only. The wheel may be made to revolve by bands, or gearing, from one of the main wheels, in various ways. man. When the machine is small, it may be moved by the power of a The shafts may be fixed forward of the cutters, and the general arrangement be varied, without altering the main principle of my machine. What I claim as my invention, and for which I ask letters patent, is the combined action of the teeth and cutters, whether the cutters are moved in a traversing or a revolving direction. WILLIAM MANNING. ENGLISH PATENTS. To THOMAS BOTFIELD, coal and iron master, for his invention of certain improvements in making iron, or in the method, or methods, of smelting and making of iron. Sealed 2nd January, 1828. Two leading features are proposed by the patentee as novel in connexion with the smelting of ore, which are the adaptation of a high chimney to promote a draft of air in a blast or cupola furnace, and the employment of salt or other substance containing soda in the process of smelting the ore. The particular form of construction of the apparatus does not appear to be important, it is simply proposed to erect a high chimney contiguous to the cupola, with channels, or flues, leading from the lower part of the furnace, opposite to the tuyere hole, where the blast of air enters, and also from the upper part of the cupola into the high chimney, by means of which a very considerable draft will be produced through the tuyere hole, and the ore become more effectually operated upon by the consequent increased heat of the furnace, than in the ordinary construction of blast furnaces. As it is considered that the employment of heated air would improve the blast, and be beneficial to the metal produced, a small furnace or heating stove is placed contiguous to the tuyere hole, and a current of air passed through it, which air, after it has become heated, is brought into the blast at the tuyere hole, and is carried through the furnace by the draft of the chimney. The employment of salt, or other material, containing soda, is confined by the patentee to the operation of smelting the ore. The same was used by Mr. Duckock, for manufacturing iron in the puddling furnace. [Lond. Jour. of Arts and Sciences. TO JAMES SMETHURST, lamp manufacturer, for an improvement, or improvements, in lamps, communicated to him by a foreigner residing out of the British dominions. Sealed 6th November, 1827. THIS invention is a lamp for the table, on the hydraulic, or fountain principle, in which the oil is made to rise up a column to the burner, by the pressure of a descending column of some heavier fluid. The oil is placed in a receptacle near the bottom of the pedestal, from whence it is intended to rise through a perpendicular pipe to the burner. A reservoir of water, or other fluid, is placed in the upper part of the pedestal, which descends by a pipe to the under part of the oil vessel, and there opening a valve upward, enters below the column of oil in the receptacle, and gradually raises it in the column up to the wick. The principle on which this lamp is intended to act is by the difference of specific gravity between the oil and the water, or other fluid employed in the descending column, which the patentee states, should be in the proportion of two to three. The form of the pedestal and shaft may be cylindrical, or of various other shapes, containing the reservoirs and pipes within. When the charge of oil has been consumed, in order to recharge it, a high funnel is affixed to the top of the column, near the burner, into which the oil is to be poured, when by the superior height and consequent preponderating weight of the oil in the funnel above the burner, the water, or other fluid, will be forced back again into its elevated chamber, and will have no power to expel the oil from its receptacle until the high column in the funnel is removed. The lamp is furnished with a receiving vessel for the occasional small overflow of oil, and also a vent aperture for the purpose of allowing the water to flow; and in its general appearance resembles other table lamps constructed upon the fountain principle. [Ib. To CHARLES Derosne, Gentleman, in consequence of a communication made to him by a certain foreigner residing abroad, and inventions by himself, for an invention of certain improvements in extracting Sugar or Sirop from Cane Juice and other substances containing sugar, and in refining sugar and sirops. Sealed 29th September, 1830. THIS invention consists in a mode of discolouring sirops of every description, by means of charcoal produced by the distillation of bituminous schistus alone; or mixed with animal charcoal, and even of animal charcoal alone. Whatever sort of charcoal it may be, it must be disposed on very thick beds, on a filter of any suitable form. The filter of itself has nothing peculiar, and does not form the object of the patent, because it is already known and used for other purposes, but till now it has not been employed for discolouring sirops. To obtain this discolouration, the charcoal is put in a case, in which is placed, at the distance of about an inch from the bottom, a metallic diaphragm pierced with a great number of holes; upon this diaphragm is placed a coarse linen, or woollen cloth, which exactly covers it; and upon this cloth a bed of charcoal of bituminous schistus alone, or mixed with animal charcoal, or animal charcoal alone, as above said. Whatever it may be, this charcoal ought to be in a finely divided state, in order that it may be well penetrated with the sirop which is intended to be filtered. Charcoal in powder would not be penetrated by the sirop. It has been found that charcoal reduced to the size of fine gunpowder, is very fit for this operation; if the grain is too large, the filtration would operate too rapidly. The charcoal should be lightly pressed, and then new beds of the same charcoal placed upon it, which should likewise be pressed till it has come up to the height of fifteen or sixteen inches. It may be made higher if found necessary, or it may be less, but the discolouring effect will be always in proportion to the thickness of the bed of charcoal. When the charcoal is disposed to the proper thickness, it is to be covered with another metallic diaphragm, pierced likewise with holes, upon which is spread another clear linen cloth; upon this cloth the sirop is to be poured which is intended to be discoloured. The sirop ought then to form a bed of several inches thick, from four to eight, although there is no precise rule. For operating well in the filtration of sirops, the sirop ought to be clear before pouring it upon the filter, and ought to have undergone a first filtration by the ordinary means; the object to be obtained by this filtration through the thick beds of charcoal is only the discoJouration of the sirops. The sirop to be filtered ought not to exceed the consistence, which is produced by two-thirds of sugar, and one-third of water; but it may be filtered at any less degree of consistency according to the result required. When the sirop is hot the filtration operates a great deal more rapidly. In operating on a great scale, a reservoir filled with sirop can furnish several filters at one time. The first portion of sirop which passes through the filter is always the least coloured, and by the time the colouring part combines itself with the charcoal, the effect of the last portion becomes less sensible. That portion of sirops, which retains a part of its colour after filtration, can be passed again through another bed of charcoal in another filter, and by this means it may be obtained in a great degree of purification. Whatever the kind of charcoal used, it is desirable to mix the charcoal with about one-sixth part of its weight of water before putting it in the filter. The place of that water is occupied by the sirop which penetrates the beds of charcoal; and when the water comes at first, it has a disagreeable and salted taste, when the animal charcoal is used, the water after that comes mixed with a portion of sirop, and soon after it is displaced by the pure sirop. When the charcoal has been deprived of its discolouring effect, water is to be poured upon the filter for dissolving or displacing the sirop which may be mixed with the charcoal, the sirop then comes pure first, and after that mixed with more or less water, using as little water as possible. It is convenient to suspend occasionally the effusion of water on the upper part of the filter by shutting its cock. The sirop being heavier than the water, gains the bottom of the filter and runs first. ১ The sirops made with raw sugar by this process can be made as clear as water, the molasses are deprived of their bad taste, and are converted into a good kind of sirops of a clear and yellow colour. The sirops from which it is desired to separate the colouring matter can be obtained directly from the juice of cane, or of beet root, or from the saccharine matter produced by the action of sulphuric acid upon the farinaceous matters, before these juices or liquids have been baked for extracting the sugar. The sirop may likewise be produced from the solution of all kinds of sugar, and of the products GUNTHER'S Piano Fortes. --WASON'S Sealing Wax. of inferior quality, which are obtained in sugar refining under the name of "bastards" and other sugars. The purpose of producing of sirops may be to sell them in such a state for the ordinary consumption, or to bake them for making sugar whiter than is obtained by the common process, or these whitened sirops may be used for discolouring the refined sugar, in making them filter through the loaves, instead of the earth and water commonly used. The object of the invention being to obtain discoloured sirops by the means above described, this discolouration of sirops is always proportionate to their primitive colouration, and to the quantity of charcoal which is used. In the carbonization of bituminous schistus there is nothing peculiar; it is produced in close vessels, as is done for producing animal charcoal, only it is convenient before the carbonization, to separate from the bituminous schistus the sulphurets of iron which are mixed with it. Instead of using the schistus, or animal charcoal of the size of gunpowder, it can be reduced to a powder still more fine, mixed with sand. In this state a given quantity of charcoal discharges the colour better than powdered less fine, but the filtration is slower, and more difficult to be regulated. The patentee says, "having tried this method, I have given the preference to the other mode, but both of them are the object of the patent." [Ib. To JOHN HENRY GUNTHER, piano forte manufacturer, for his invention of certain improvements on piano fortes. Sealed 10th July, 1828. THIS invention is the adaptation of an additional sound board to piano fortes, which is to be made much stronger than the ordinary sound board, and to be placed above it. This board is proposed to be made of hard wood, about a quarter of an inch in thickness, but rather thinner towards the base; it is to be fastened to the framing of the instrument, and made particularly firm and capable of sustaining the tension of the strings, as the bridge and rails for the hitch pins are to be affixed to it. This and the ordinary sound board are to be connected by blocks, so that they shall both vibrate together; and it is stated that the adaptation of this improvement to piano fortes, whether of the horizontal or upright kind, very greatly improves the strength and tone of the instrument. [1b. To PETER RIGBY WASON, Esq. barrister at law, for his having invented a certain improvement in the article commonly called stick sealing wax. Sealed 25th September, 1828. THE patentee has experienced what every one who seals a letter with wax must also have experienced, the great inconvenience of not being able to keep the stick of sealing wax in a blaze, or to make the wax flow on the paper, without the trouble of several times relightBROOKING'S Sails for Ships. ing the stick; no one, however, that we have ever heard of before the patentee, has suggested the simple idea of placing a wick through the centre of the stick, which ingenious thought forms the subject of this patent. The material, or composition, of which the sealing wax is made, though not claimed as new, is described as consisting of shell lac one part, vermilion one part, and Venice turpentine one part, (by weight we presume,) which are to be reduced into a mass over a slow fire, and when thus properly mixed, the portion which is to constitute a stick, is to be rolled out to its proper dimensions upon a heated copper plate: when that is done, a groove is to be formed along the middle of the stick, and a straw inserted, which is to constitute the wick. The stick of wax is then to be rolled again upon the heated copper plate, for the purpose of enclosing the wick, and being afterwards marked with such patterns or devices as may be thought desirable; on becoming cold the stick is ready for sale, or for use. On lighting the end of this improved stick of sealing wax, the straw will sustain a small flame, which will, as a taper, keep the wax in a blaze, and flowing as long as may be required. [Ib. To SAMUEL BROOKING, Esq., a Rear Admiral in the Royal Navy, for his invention of a new method or mode of making sails of ships, and other vessels. Sealed 4th September, 1828. Ir has been found that in consequence of the strain which is given to sails in angular directions, by the pressure of the wind, they invariably stretch from corner to corner, and bag in the middle, which causes them to be much sooner destroyed than they would otherwise be, if the strain was supported by a diagonal seam. It is therefore the intention of the patentee, instead of making sails by joining the breadths of canvass in perpendicular directions, to make the seams diagonally, that is, from corner to corner of the square sails, and in such manner crosswise of all other formed sails, as to give that strength and resistance in the direction of its greatest tension, which will prevent the stretching of the fibres of the material, and render the sails much more durable. There does not appear by the specification, to be any novelty proposed in the mode of making the canvass, or in the forms of the sails, but merely in the way in which the canvass is to be cut, and the direction in which it is to be sown together, to make the sails, which constitutes the subject of this patent. [1b.
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 8 (1831), p. 175 · View the page
4. For a machine for Cutting Grass and Grain; William Manning, Plainfield, Essex county, New Jersey, May 3.
Remarks. (See the specification.)
Published accounts: journal notice
Notice in the monthly list of patents
Journal of the Franklin Institute, new ser., vol. 8 (1831), p. 194 · View the page
To all to whom these presents shall come, be it known, that I, Stephen Hinds, of Montrose, in the county of Susquehanna, and state of Pennsylvania, have invented a new and useful composition for the making of beer, and that the following is a full and exact description of the composition and process of compounding the same as invented by me, to wit: one pint of molasses, one pint of new milk, and one pint of common hop yest, are put into a six gallon keg, which is then filled with air, by means of a pump, or in any other mode most convenient, until no more can be compressed into the cask; it is then corked up, and let remain in that state for twenty-four hours. At the expiration of that time, two gallons of water are mixed with one quart of molasses, one ounce of ginger, half an ounce of allspice, and half an ounce of the essence of spruce, heated boiling hot, and put into the cask, with three and a half gallons of cold water, again corked up, and permitted to remain twenty-four hours longer. The beer will then be fit for use. When the beer is drawn out, except two quarts of the sediment, which should be left in the cask, the last described composition can be again added to it, and so on during the season. What I claim as new and as my own invention in the above described manufacture and composition, and for the use of which I ask an exclusive privilege, is the composition first above described, the proportions of the second described composition, and the whole process of making. The whole of the beer should be drawn without a vent. The carbonic gas generated in the beer, renders one unnecessary. STEPHEN HINDS. : Specification of a patent for an improved Machine for Cutting Grass and Grain. Granted to WILLIAM MANNING, Plainfield, Essex county, May 3, 1831.
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP, USPTO records
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, USPTO records, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- Burke's 1847 Patent Office list gives the same patent.