Drawings and documents
National Archives restored drawings: drawing
E. Nott's Patent Drawing for and Improvement in Metallic Bodies
National Archives, Restored Patent Drawings (Record Group 241) · Full-size scan at the National Archives · Catalog record
Show the text on the drawing Hide (427 words)
Words on the drawing as machine-read by the National Archives; not checked. Useful mainly for searching.
10.00 / "teel. / E.NOTT'S Gas Furn Becord / 75. METALLURGY / Improvement in thetreatment of matallic bodies. / ROASTERS: / Patented June 29th1833. / & Shelf. / T4 / 263 31 / Shaft shelf f, / Fig.4. / CLASSIFICATION / Fig:1. / Fig.2. / Fig.3. / 7641- X / le / I' / lc / DIVISION. / Il / Shaft & Shelf, / ROASTERS. / 75. metallurgy / as / 75 / Fig's Liongitudinal section of furnace / Fig 2. Liongritudin al section of furnaco / 115.3 Liongitud in seetion of surnace / Fig:4. Longritudinal section of furnace / and rertical reverberatory chamberof / and rertival and horizontal chamber / and planovertical chamber toff from / chpola S vertical corerboratory maber / treatment, cut off from horizontal cha / and boiler. / herizonta chainber inber a nd boiler. / cut off from boilerise. / "mber and boiler. / a. nozzle of bellows. b. chamberof combus." / a grate.b. chamber of combustion / a. nozzle of bellows. / a. Nozzle of bellows. / c.corer of inlet to fuel. d lateral outlet flame / c.c. barsof hars of iron orother matatial under treatment / b. grate. / b. Grate. / e.bars of iron under treatment an successivefloors / d fixed offset onwhich bars rest / c. chamber of combustion, / C. Chamber of combustion. / f. lerez risible byrh ich bars of iron are sus= / e. excentric axis of open moreable restsor / d. lalera! outlet. / d. Corer of intet for fuel. / =tarned and passed down. / floor from which hars harebeen passed down / e. tron in place with morgorlefs charcoal / Q.e.e.e. hars of iron . rother material / fixed section ofsecond floor forbars. / f. moreable pens supporting & letting / as required resting on drop bottom. / under treatment on solid floors. / h. fixed section of third floor. / d own m oreable rests orf ors. / f. apprture fordrawing/off motal / f.f. Inlets to bars of iron. / 2. lerezrisible fo sustaming passing down hars. / 5. open moreable rests orf tooc inplace / g: calibre of cupola. / 3. Outiet to horizontal chaniber / k. fixed section of sourth floor. / with incumbent bars. / h. inlet to cupola. / and boiler cut off. / l. leverfor: stainingrgpassingd.r burs / h. open moreable rests or loor on central / t.i.i. bars of uron or other material / m. do / axis, ich bars have been n. passed down / under treat ment. / n fixed sect. on of fifth floor. / i. open moreable rests or floor on cuntral / k.k.k. inlets to bars insuccessive floors. / 0. horizontal flue for bodies at rest. / aris with incumbent bars place. / l. horizonta chamber for boiler Fe. / P. boiler / y. chimuey. / k. outlet to horiz onta Icha mber / cut off. / P.cistern for heating mater by steam ondenced / and boiler cut off
USPTO scan
The patent as scanned by the USPTO
U.S. Patent and Trademark Office · Google Patents
Show the transcription Hide (509 words)
Machine transcription (LightOnOCR) of the pages as scanned by the USPTO, most of them the handwritten copies made when the records were restored after the 1836 fire. Not checked; it can misread handwriting, so compare it with the scan.
Page 1.
E. Nott.
Refining Iron & Steel.
BEST AVAILABLE COPY
Patented Jun. 29, 1833.
See "7.641 X."
(Vol 17 Restored patents, 189)
Fig. 1.
Fig. 2.
Fig. 3.
Fig. 4.
Page 2.
Case "7"
Eliphalet Nott.
June 29, 1833
Letters Patents.
The schedule referred to in these Letters Patent, & making part of the same, containing a description in the words of the said Eliphalet Nott himself of his improvement in the material combination and confinement in place of the damper & handle as employed in common stove pipe.
Case "N. 7."
Specification of an improvement made in the materials for dampers and handles, & in the manner of combining the same in an iron stove pipe. — Much as inconvenience has arisen from the warping & corroding of dampers & handles in common stove pipe, when made, the one of sheet & the other of wrought iron, therefore an improvement has been introduced & the same having been perfected & tested by repeated experiment is intended to be introduced into general use; which improvement consists in making use of cast iron for said purposes, & which (if the adjustment be wholly in the pipe itself) may be effected by employing cast iron circular flat for a damper, the external zone across which to the extent of about one half of an inch in breadth is divided transversely into three parts in such manner, that the interior part is equal to the two exterior ones — & by removing the whole of which parts from the plane of the remainder of the flat by deepening the interior part & elevating the two exterior ones (or vice versa) in such manner & to such an extent that a space shall be left in the plane of the flat for the insertion of the handle in place, which handle also to be of cast iron & to carry on the larger end a sort of head or other projection for turning the same & carry on the smaller end, a groove for receiving after insertion in the pipe, the edge thereof which being rimmed down will enter an edge
Page 3.
confine the same; but which, if the adjustment be partly in the rim of the open cover on which the pipe stands, & partly in the pipe itself may be effected by casting the damper & handle together adjusting the same in said rim & setting the pipe thereon & surrounding the whole by a base moulding cast separately; sockets being previously formed in said rim for the underside of the journals of the handle to work in & the lower margin of the pipe & of the base moulding which set down over said handle being hollowed out for the upper side of the journals to work in. For further information, reference must be had to the drawings & explanations hereunto appended.
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 12 (1833), p. 405 · View the page
28. For an improvement in the Construction of the Vertical Grate, and the manner of combining therewith the sash for mica, and the inlet for fuel, in an anthracite coal stove; Eliphalet Nott, Schenectady, New York, June 29.
Remarks. CLAIM. "I therefore claim as my invention and improvement in anthracite coal stoves, having their inlet for fuel at top, the preventing of the falling out of ashes, and the warping of the front grate, by dividing the same vertically into sections as aforesaid, and whether so divided or not, by combining the same with its illuminating sash in front in the manner above set forth: together with the uses to which said improvement has been, or may hereafter, be applied; irrespective of the inlet for fuel at top, and irrespective of every other provision with which the same may be combined in stoves or furnaces of any sort."
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 12 (1833), p. 406 · View the page
31. For an improvement in the Construction of Tops for Stoves, by a combination of sections cast separately; Eliphalet Nott, Schenectady, New York, June 29.
Remarks. CLAIM. "I therefore claim as my invention and improvement for preventing of the tops of stoves from cracking, the casting the same in sections, or dividing the same into sections when cast entire, and thereafter combining said sections in one whole, as aforesaid, together with the uses to which the same has been, or may hereafter be, applied in stoves or furnaces."
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 12 (1833), p. 407 · View the page
35. For Increasing the evolution of heat from anthracite coal, and for rendering the whole heat evolved from fuel of any sort, available to the production of useful effect in the treatment of bodies at rest; Eliphalet Nott, Schenectady, New York, June 29.
Remarks. (See the specification.)
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 12 (1833), p. 421 · View the page
The proportions given in this drawing are believed to be good, but they may vary considerably without materially injuring the effect. In these, the diameter of the smoke pipe is one, the mouth of the cap, or base of the cone, two, and the axis of the cone, three. Any one may easily satisfy himself of the effect of the vacuum produced by the operation of the cap, by making one of paste-board of the size of the drawing, and inserting a tube in the side of it; then by holding the end of this tube near the flame of a candle, and blowing on the vertex of the cone, he will see the flame of the candle rush with great velocity into the end of the tube. Indeed the velocity with which it rushes into the tube is greater than the velocity of the air passing the apex of the cone. For it is known by experiment that if the wind be made to blow against the mouth of the cap, that the air will blow down the tube with a greater velocity than the air has which meets the cap. And when the wind blows against the apex, it is believed that the effect is nearly reversed. This point, however, shall be determined by experiment, and the result laid before the public, with any other information on the subject which may be obtained in the progress of the investigation. Specification of a patent for increasing the Evolution of Heat from Anthracite Coal, and for rendering the whole of the heat evolved from fuel of any sort, available to the production of useful effect, in the treatment of bodies at rest. Granted to ELIPHALET NOTT, Schenectady, New York, June 29, 1833.
Remarks. It having been discovered that the heat of an anthracite coal fire may be increased by more fully igniting its contained hydrogen; and it having also been discovered that the heat of a fire of any sort may be advantageously applied successively to the treatment of successive bodies; certain improvements have therefore been made for carrying the same into effect; which consist, in providing for the more comNott's Management of Heat. plete combustion of the hydrogen produced in the use of anthracite coal; and in concentrating several processes to which the heat produced in the use of fuel of any sort can be conveniently applied;always beginning with a process that requires a high temperature, as the reduction of ore, and the manufacture of metals, or the subsequent melting or heating thereof, for the purpose of being cast or wrought into other forms; and proceeding thereafter to processes requiring a lower temperature, as iron to be annealed, or pit coal, or rosin, to be decomposed for the production of gas: by interposing between a cupola, forge, furnace, or chamber of combustion and a boiler, or a chimney if no boiler be in use, an elongated chamber of treatment, of nonconducting material, either vertical, inclined, or horizontal; or in part the one, and in part the other; the same being exhibited either in a single channel, having, when required, recesses formed along the line thereof, that certain bodies, or bodies in certain localities, can be placed more or less out of the main current of the contained flame; and having also inspecting apertures, and apertures for the ingress and egress of bodies, or for the admission of air for the cooling of the interior, or the ignition of the contained hydrogen, all governed by valves:-or the same, or some part thereof, being exhibited in two or more channels, placed side by side, or one above the other, and so divided into compartments, and furnished with additional interior inlets and outlets governed by valves, that bodies under treatment can be passed from one end to the other, and that the flame can be passed in the one channel, or the other, and caused to bear with greater or less intensity on the bodies in any locality of either, or carried off from them all to the chimney through a separate flue governed by a valve: and in the keeping up the temperature along the line of said chamber of treatment after the process of melting in the cupola has ceased; -by converting a section of said chamber of treatment into an occasional chamber of combustion, and separating the same by a valve from the cupola, unless it be deemed preferable to make use of the cupola itself, in such case, as a mere chamber of combustion; and in causing the entire volume of flame, however divided in its passage, to bear upon the boiler, (if a boiler be employed,) which is always to be placed late, if not last, in the series of bodies to be treated, and the steam thereof, besides driving an engine employed in heating water to be used in other processes, as drying, bleaching, &c.: and in providing, adjoining the boiler, an auxiliary furnace, to be used when necessary; and in governing by valves the inlet to the boiler from the cupola, and the inlet to the furnace from the external air, so that when the flame from the cupola ceases, the inlet to the boiler may be closed; and when the flame from the cupola is sufficient for the boiler, the inlet to the furnace from the external air may be closed; unless when opened for igniting the hydrogen from the cupola, or for cooling the interior. It is understood, that, when practicable, the air introduced for the ignition of gas, should be heated, by being passed between the crust of the fabric, and an exterior, or second crust, so enveloping the whole as to form an air chamber. And it also being understood that Nort's Management of Heat. a double arrangement is to be preferred, so that as one apparatus is repairing, the other may be in use. For further information reference must be had to the drawings hereunto annexed. ['The specification next contains a "summary" of the improvements, in which the foregoing is recapitulated, but somewhat condensed; this part we omit, and proceed to the claim, which varies but little from the summary.] I therefore claim as my invention and improvement, the invention of the increasing of the evolution of heat in the use of anthracite coal, and the rendering the entire heat evolved in the use of fuel of any sort available to the production of useful effects, by concentrating and arranging in the order aforesaid, the several processes to which the said heat can be conveniently applied in the treatment of successive bodies, or of bodies divided into successive portions at rest; by interposing between a cupola, forge, or furnace, a chamber of combustion and a boiler, or a chimney if no boiler be in use, an intermediate chamber of treatment, exhibited and furnished as aforesaid, or exhibited and furnished in any other manner, provided adequate provision be made thereby for the ignition of the hydrogen of anthracite, and for rendering the entire heat from fuel of any sort productive of useful effect, by applying the same successively to such several processes as can be conveniently carried forward by the treatment of successive bodies at rest.-Also the preventing the injurious effects of the flame of a cupola upon a boiler in contact therewith; and the diminishing of the reduction of the temperature to which it is exposed while charging the cupola, by the removal of the same to a distance therefrom. Also the protecting of the boiler, however situated, against the action of the flame of a cupola, when too intense, by passing off a portion of the heat thereof through a separate flue governed by a valve: and also the governing of the inlet to a boiler from a cupola, by a valve; and the furnishing of a boiler by means of an auxiliary furnace, with the requisite heat when the cupola is not in blast, or when the heat thereof is insufficient, together with the uses to which the same has been, or may hereafter be, applied. ELIPHALET NOTT.
DATAMP: illustration
Illustrations from DATAMP
DATAMP (Directory of American Tool and Machinery Patents), via the Internet Archive · Archived DATAMP page
About this record
- Patentee
- DATAMP
- Date
- DATAMP, USPTO records, Burke's List of Patents (1847)
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, USPTO records, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- The sources give different dates; the date shown is the one most of them agree on.
- The Franklin Institute's journal confirms the date shown.
- Burke's 1847 Patent Office list gives the same patent.