Drawings and documents
National Archives restored drawings: drawing
Samuel Parker's Improvements in Tanning
National Archives, Restored Patent Drawings (Record Group 241) · Full-size scan at the National Archives · Catalog record
Show the text on the drawing Hide (170 words)
Words on the drawing as machine-read by the National Archives; not checked. Useful mainly for searching.
Vamuel Tarker's improvements / Tanning / Patented July G !808 / Fig: /. represents the Beaming Machine, / 149,Hides Skins.and Leather, / Vol. 2, grage 241 / Apparatus, / Fig: 2. / the Bark Mill- / 9. Tanning. / Fig.3. Apparatus for keating & tanning. / Fig re 1. / CLASSIFICATION / 900 X / DIVISION. DIV / Reference, Fig, 1. / A,A, Two large horizontal rollers fluted; / B,B, Middle small rollers without felted covering. / D,D, &c. Cog wheels of equal size outside of frame E, / C,C, lower rollers with knives placed long ways of rollers / Fig: 20, a,a, The large rollers with saws / b,b, The small rollers with saws / C,C, E,C, Cog wheels of equal size / Fight 3. / d, The corner ways gearing. / h, brick platform / v, the sistern / m, coppur bottom / a, second sistern, / Fugre 2. / f, f,ve water proof copper tute- / k,-fire place- / c, third sistern- / of / d, fourth sistern / e, the hump / g,g, stop-cocks / Made under / of Patents / March / Cerrectly АД drawn. / "P off
USPTO scan
The patent as scanned by the USPTO
U.S. Patent and Trademark Office · Google Patents
Show the transcription Hide (2,250 words)
Machine transcription (LightOnOCR) of the pages as scanned by the USPTO, most of them the handwritten copies made when the records were restored after the 1836 fire. Not checked; it can misread handwriting, so compare it with the scan.
Page 1.
900X
S. PARKER.
TANNING.
Patented July 9, 1808.
THE NORRIS PETERS CO., PHOTO-LITHO., WASHINGTON, D. C.
Page 2.
July 9, 1808
Samuel Parker
Letter Patent
Issued July 9, 1808. July 9, 1808
The schedule referred to in these Letters Patent, making part of the same, containing a description in the words of the said Samuel Parker himself, of his mode of essaying and finishing leather of all kinds.
This consists in extending, smoothing, consolidating, splitting, coming, cutting, cramping, oiling, stuffing, stamping, or printing, blacking, drying, slicking, tripping, polishing, glazing or finishing — which is performed by a machine or machines contained in a frame, the size of which may be according to the work, that is to say, if whole hides are intended to be done at one operation, in each part of the finishing, the frame of the machine must be as wide as the hide and the rollers or nuts, and all the parts of the machine, must be proportioned to the size of the frame, but, the whole work may be performed equally as well by a frame six feet wide and six and half high in the clear by making the ends of the rollers or nuts and beam smaller, to admit the outer sides of the skins to be doubled while the single part only passes between the rollers and nuts and beam — repeating the same and performing a part at a time. The frame if larger or smaller will alter the proportion only not the construction or principle of the machine, which consist principally of a certain number of rollers, to perform the different parts of the work, all at the same time, placed in different parts, and although an horizontal position hath been preserved, it is not a matter of consequence: as the rollers may be placed in any position or number, the constructor pleases, that will perform the work. The different sets of rollers, are for different work, and may generally be placed as the first. The number proportion and movement being nearly the same. Two large and one small, the small one in the center, placed horizontally, to be from one to two thirds less than the large; to have a cog wheel on the outside of one end of each roller of equal size, or one on the center roller, on the inside and next to the part, of the same size, or larger which will make the large rollers turn an equal or greater number of times with the small, which motion performs a slicking slicking operation. The first set of rollers are intended
Page 3.
900x
to extend smooth, consolidate, and slick the skin or hide, after being properly prepared, which operation fits or prepares them for splitting. The second set of rollers or nuts are intended for scouring and washing skins or hides. The nuts or rollers may be placed in a circular form the small. Three or more placed round it, one under and two at the side of the under and centre all having a proper bearing on the centre one, forming halfcircle and one placed above the centre, which are enclosed in a cistern. They may also be placed in a circle having one placed in the centre then two or more courses round it: to have a proper bearing on each other, and to one or more of the nuts or rollers may be attached stickers, or scrapers, brush or brushes, or some of the rollers may be fluted, or any other article the operator may choose to substitute by detaching the stickers scrapers brushes, and so forth from the above, the principle may be applied to the washing of linen, woolen, or any other pliable substance. The ends of the rollers may turn on trundles or small rollers or multiplying wheels, or being expedient the ends of the rollers with steel or other metal, or hard points may turn in sockets of any suitable metal all of which would reduce the friction of necessary. The third set of rollers or nuts are to receive the articles from the cistern and are to be furnished with stickers or scrapers, to strike the leather dry. There will be also a brush, moving from side to side of the skin or hide, with a quick alternate motion to cleanse and loosen the same. The skins or leather having passed through the last process is then cut into garters for men, women, or children, and are cut in one entire piece or two pieces except the sole, the same to be cramped on a boot tree, made for that particular purpose either of wood or iron or any substance suitable for the purpose with a joint in the foot or instep in such a manner, as that the toe instep or foot shall drop or turn downward until the leg is placed on the tree and tacked at the heel and the tree brought to its proper place again. Or there may be a joint in the ankle the foot split in two parts and turn up each way, or it may be done by the leg and foot being in two parts, or it may be done by a movable piece or pieces of wood, iron or any other substance suitable placed at the heel and running each or either way. Stretched by screws, keys, axes or wedges after the leather is tacked there, being thus placed smooth on the boot tree remain in that
Page 4.
900X
situation until dry then finished into morocco, or other ways and made on right and left last. Javanese legs or any other kind, may by this process be made into morocco or other leather finished and formed for the boot maker in a very superior style one which will be a security against all manner of dirt originating in the present mode of stretching, cramping & finishing by cumin and boot makers in the inside of the boots and which generally soils the stockings. The oiling, stuffing and blacking is performed by the under rollers of each prepared by being covered with brushes or rollers knitted and stuffed, or any other thing proper to perform the operation. The oil, stuffing and blacking are placed under each receiving roller in a trough or box long enough to receive the rollers to turn in the same. The leather is inserted through that and the next roller, at the conclusion of the blacking, there should be a piece of refuse leather, or cloth follows the skin, to prevent the oiling the upper roller, unless the roller is made with a spring or fall to drop the moment the skin leaves the rollers. The stuffing is prepared by one or more sets of nuts and rollers placed two to a set, horizontally, one set above the other, to have a proper bearing with each other, sideways, and geared cornerways. The nuts and rollers all turn inwards from the top downwards, receive the stuff at the top, and pass it through the whole number of sets more or less. The under sets, to be the stripping rollers, the other nuts under which should be a trough to receive the stuff thus prepared: the same principal will answer a most valuable purpose, for making and mixing of clay for making of bricks, pottery, or any other purpose or for working mortar of all kinds, or for grinding of apples. The blacking for what is called waste leather may have the roller placed a little circular and have a roller on the side of it to size the leather, as it leaves the blacking roller, having the leather come through blacked and sized; or the blacking may be mixed with sizing, or, setting the extra roller above, the operation being performed at once passing. The stripping is performed by the under roller being covered with strips of woolen, hatted or cloth, or any other thing suitable for the work placed in strips as wide as the stripe is to be, and they as wide as the stripe. It may also be performed by a board as large as the skin being covered with the stripes as before mentioned, and passed on the skin stamping and printing as performed by two or more rollers placed horizontally, one of which
Page 5.
rolls shall be made of iron, steel, brass, copper, or any hard material, on which shall be carved or engraved, such figure or figures as are intended to be imprinted on the leather, or it may be performed by taking one roller with the desired figure or figures and use the same by hand or any other force. The marking may be performed by rollers placed the same as the first, the size, proportions, and movement the same as the first, one of which shall be suitably covered, for rubbing the leather out before and after blacking. The polishing, glazing and finishing may be performed by rollers the number, proportion and movement the same, as the first mentioned, but much smaller, will stand in an horizontal direction, the small one in the middle, the large one to be made of iron, steel, brass, composition, wood or any hard material to be turned with threads, the whole length of the roller, or any part or parts of it, it may also be performed by a table being placed on rollers horizontally or angularly, the leather placed on the table and the table moving forwards & backwards on the rollers, while the polishers, or stickers move from side to side, crossing the table. The splitting is performed by two or more knives the length according to the number, the greater the number, the less the friction made in an oval or in the form of a half moon set in a frame, carriage or block, in sockets of iron or some hard material if more than two place them as near each other as can be and follow in direct course after each other, standing a little level from the leather placed in the center of the frame, carriage or block to move horizontally in grooves or through mortices and cut each way, or in a level or angle direction, to cut but one way, or the knives may be set to cut but one way, the frame, carriage or block moving horizontally, level or angle ways the leather is grooved or drawn by two nuts or rollers placed so near the knives as possible passing by a beam which governs the thickness, by being moved to any gage desired there confined by keys, screws, or wedges, the leather kept close to the beam by a spring which comes close up to the knives, they moving by the side of the beam splits and divides the leather as it passes, the grain side goes through the nuts or rollers, the other part falls down by the side and over the spring, the leather thus divided in many cases is worth nearly, or quite as much the part split off as the grain side which has heretofore
Page 6.
been quite lost in useless shavings, it may also be performed by passing between two rollers, placed instead of the beam and spring splitting the leather as it passes through the roller next to the nut, to govern the thickness by moving it nearer to or further from the knives. The leather extending underneath the roller by two other rollers, the splitting knives are set in operation by a shaft moved by a polisher or finisher which is set in operation by a shaft moved by a crank on which is a lantern or cog wheel which gives motion to a large wheel and sets the whole machine in operation in whole or part only by shifting the bandage, or it may be done by cog wheels instead of bandages. The power which sets the whole of the rollers and other works in motion may be either, water, steam, wind, horse or cattle by hand or any other force sufficient for the work. The utility and superiority of my method of cutting and finishing leather of all kinds consists in the construction of the machine which may all be kept working at the same time doing every part of the business at once or any one part separately without the trouble of continually cleaning the table. Thus time is saved, labor is saved and the ingredients are saved and the leather made better in quality & the part split off from the skin equally as valuable as what was usually saved by the old method. Another valuable consideration is that gaiters and boots can be made actually into morocco after the legs are cut, cramped, and strained and shaped ready for the workmen to sew at. June 27th 1808.
Signed in presence of
William Thornton
Ezra Varden
Samuel Parker
District of Columbia, City of Washington 28th June 1808 then personally appeared Samuel Parker Esquire, of Bellinica in the County of Middlesex, State of Massachusetts, above named, and made solemn oath that he verily believes that he is the true original inventor or discoverer of the art or improvement above specified and referred to, for which he solicits a patent before me.
William Thornton
not necessary
DATAMP: illustration
Illustrations from DATAMP
DATAMP (Directory of American Tool and Machinery Patents), via the Internet Archive · Archived DATAMP page
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP, USPTO records
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, USPTO records, Jim Shaw's X-patent list, S. A. Elliot's printed list of patents, Burke's List of Patents (1847)
- S. A. Elliot's printed list of patents gives the same name and date.
- Burke's 1847 Patent Office list gives the same patent.