Drawings and documents
National Archives restored drawings: drawing
Solyman Merrick's Patent Drawing for a Screw Wrench
National Archives, Restored Patent Drawings (Record Group 241) · Full-size scan at the National Archives · Catalog record
Show the text on the drawing Hide (74 words)
Words on the drawing as machine-read by the National Archives; not checked. Useful mainly for searching.
Screw Wrench. / unit sig / 81. METAL WORKING TOOLS, / Pat / Nut and pine 1835. / Sliding-jaw, / CLASSITICATION / Solyman Merrick. / 71.90130 / the / you / no number / 38305 / References / A Main bar with the screse / B The nut / UR The handle / The slide jawi / Patent office July 14th 1838 / Made under the direction of the / Commition of Patents in companity / with act 3.March 1857- / Commission of later to
USPTO scan
The patent as scanned by the USPTO
U.S. Patent and Trademark Office · Google Patents
Show the transcription Hide (572 words)
Machine transcription (LightOnOCR) of the pages as scanned by the USPTO, most of them the handwritten copies made when the records were restored after the 1836 fire. Not checked; it can misread handwriting, so compare it with the scan.
Page 1.
9030X
P. Merrick,
Wrench.
Patented Aug. 17, 1835.
Page 2.
Extended for 2 Years from 17 August 1829.
90307
* Solyman Menuck, Springfield, Mass.
Letters Patent
The Schedule annexed to my said Letters Patent and making part of the same containing a description in the words of the said Solyman Menuck himself of his improvement in the screw Wrench
To all whom it may concern: Be it known that Solyman Menuck of Springfield in the County of Hampshire and State of Massachusetts have invented an improvement in the screw wrench, and I do hereby declare that the following is a full and exact description of my said improvement. The part of the main bar and slide which form the jaws of the wrench together with part of the main bar which passes through the wood handle, and the handle itself may be made in the same form and manner of the said wrench invented by Henry King for which Letters Patent of the United States were granted to him on the 25th of Oct 1832. I make the form of the main bar upon which the slide passes an oblong square extending toward the handle a little farther than the jaws of the wrench are required to open. From this point I turn the bar to a diameter equal to the largest diameter of the oblong square, and of a length sufficient to receive a nut in addition to the distance required for the jaws to open. On this part of the bar I cut a double thread screw and fit a nut to it. I connect this nut to the slide jaw by means of a bar attached to the jaw which passes along the top of the main bar and extends a short distance over the screw. Underneath this bar and near the end of slide I make a circular groove. I also turn a groove in the outside of the nut which bears a flanged collar at the end. This collar takes into the circular groove in the bar and space between this groove and the end of the bar. I make to fit the groove in the nut to open and close the jaws of the wrench and press firmly to the jaws of the nut. I make a slide bar. The part of the nut which extends back from the groove I make an octagon that it may be the more readily turned round by the hand. It will be seen from this arrangement that by turning the nut the slide jaw may be set to any desired point on the bar. Although I
Page 3.
have pointed out what I deem to be the best mode of arranging the parts so as to adjust the slide jaw by means of a screw. I do not intend thereby to confine myself to this particular arrangement but to vary the same in any way which is in accordance with the general principles of the arrangement as herein before set forth limiting myself in my claim to improvement to the arrangement of the screw, the nut and the manner of attaching the nut to the slide jaw.
Test. Witness
Wm. Bliss.
Charles A. Mann
(Signature)
Abraham Merrick.
(Drawing)
(Patented August 17, 1855)
(51897648)
Published accounts: journal notice
Notice in the monthly list of patents
Journal of the Franklin Institute, new ser., vol. 16 (1835), p. 287 · View the page
483. Screw wrench.-Solyman Merrick, Springfield, Mass.
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 17 (1836), p. 205 · View the page
41. For an improvement in the Screw Wrench; Solyman Merrick, Springfield, Hampden county, Massachusetts, August 17.
Remarks. In this screw wrench the sliding jaw is not drawn back by turning the handle, as is usually the case with those imported, but the bar which is at the back, and makes a part of the sliding jaw, is acted upon by a nut which swivels in it, and turns upon a double threaded screw, extending from the oblong square part upon which the sliding jaw moves, to the handle, which is of wood. The nut is made octagonal, and is easily turned by the thumb and finger. The claim is limited to the arrangement of the screw and nut, which we believe to be new. These articles are manufactured by N. Foot & Co., Springfield, Massachusetts; we have seen them, and can aver that in point of construction and of workmanship, one of them is worth several of the best imported wrenches.
DATAMP: illustration
Illustrations from DATAMP
DATAMP (Directory of American Tool and Machinery Patents), via the Internet Archive · Archived DATAMP page
About this record
- Patentee
- DATAMP
- Date
- DATAMP, USPTO records, Burke's List of Patents (1847)
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, USPTO records, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- The sources give different dates; the date shown is the one most of them agree on.
- The Franklin Institute's journal confirms the date shown.
- Burke's 1847 Patent Office list gives the same patent.