Drawings and documents
National Archives restored drawings: drawing
Jonathan Payne's Patent Drawing for a Lever Press
National Archives, Restored Patent Drawings (Record Group 241) · Full-size scan at the National Archives · Catalog record
Show the text on the drawing Hide (41 words)
Words on the drawing as machine-read by the National Archives; not checked. Useful mainly for searching.
100. PRESSES. / Baling, Plunger / Rack-Bar and Pinion. / glay and bottom / CEASSIFICATION / 9085X / DIVISION: / Sonathan Payne's / Bever Press. / Patented 9th th Sep: 1835.. / E our / call SF
USPTO scan
The patent as scanned by the USPTO
U.S. Patent and Trademark Office · Google Patents
Show the transcription Hide (766 words)
Machine transcription (LightOnOCR) of the pages as scanned by the USPTO, most of them the handwritten copies made when the records were restored after the 1836 fire. Not checked; it can misread handwriting, so compare it with the scan.
Page 1.
9085X
J. Payne,
Hay Press.
Patented Sep. 9, 1835.

A.M. PHOTO-LITHO. CO. N.Y. (OSBORNE'S PROCESS)
Page 2.
Sept 9 1835
Jonathan Payne Russellville Kentucky
Letters Patents.
The schedule referred to in these letters patent and making part of this same containing a description in the words of the said Jonathan Payne himself of his improvement in the Lever Press.
To all to whom these presents shall come,
Be it known that I Jonathan Payne of Russellville in the county of Logan and State of Kentucky, have invented a new and useful Lever Press and that the following is a full and exact description thereof together with a complete drawing hereunto annexed and referred to marked 1, 2, 3 the different parts and structure of of which is specifically set forth as follows, to wit:
The bottom sill marked A, A to be made of solid timber squared 24 by 20 inches measuring in length from 30 to 60 feet as the greatest of leg power desired may acquire B, respectively 2 upright pieces hereof of solid timber 10 feet long 18 inches wide and 6 inches thick dovetailed one of each side of sill A, A, precisely in the centre of said sill and bolted with a strong iron pin through through said upright pieces being placed in said sill so as to preserve the space of 12 inches between them from top to bottom. Between that near the top of said upright pieces marked B, as aforesaid is suspended the main lever marked C on the drawing by an iron pin 3 inches in diameter and twenty four inches long, passed through 10 pieces D, and lever C, lever C from 30 to 50 feet in length and squared 18 by 12 inches. Letter D represents 2 upright pieces placed at the distance of 12 feet from each end of sill A, A, of same width and thickness of pieces B, from 12 to 16 feet long, and dovetailed into sill A, A, at each end as aforesaid as said upright pieces B.
Page 3.
1003
designed to keep within its proper sphere of action lever b, the cog wheel b, in the drawing represents the large wheel measuring 7 feet in diameter in the proportion to the scale of proportion given in the foregoing parts, and the cast iron wheel and nuts F, from 7 to 8 inches in diameter are hung upon an iron axle of two inches square fixed on two upright pieces of the same width as upright pieces B & D, and 4 inches thick dovetailed into side A, a, one foot from each end of said side rising above said side 16 inches and marked in the drawing H, said axle to be placed on said upright pieces H, so that the wheel or nut H shall run between said pieces H, and the large wheel b, on the outside of them, the small cast iron wheels or nuts with a crank marked on the drawing C, are placed on iron axles inserted through upright pieces D, which wheel or nut is to be turned or placed so to fit with its cogs exactly into those of the wheel b, middle levers H, are to be used for pressing flax, manufactured Tobacco, and all descriptions of oil. These lever levers are fastened by a pin into and between upright pieces D, at a convenient height from side A, a, and operated on by lever C, by means of an iron suspension made of two iron bars hinged one on each side of lever C and marked down the drawing, the suspension I, are cast iron racks with cogs fit into the cogs of wheels or nuts F, fastened by iron pins in the ends of lever C, and passing when drawn down at their lower end, through side A, A, lever C, is altogether sufficient for pressing flaxheads of Tobacco or baling cotton and there was no difference with the use of the upper levers H. This machine is designed to be used in pressing tobacco baling cotton and pressing oil made of all kinds of beans or seeds, as well as packing flax, pressing cider and making manufactured chewing Tobacco.
Jonathan Payne
Witness
Thomas M. Smith & R. W. Sanuary
N.B. The above described lever prop is upon such a principle
Page 4.
9085X
that it may be geared and operated at one end of the lever or belt as may be desired.
Jonathan Payne
(16 words) (Drawing)
8. 80514
Published accounts: journal notice
Notice in the monthly list of patents
Journal of the Franklin Institute, new ser., vol. 16 (1835), p. 358 · View the page
521. Lever press. Jonathan Payne, Russelville, Ky.
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 17 (1836), p. 251 · View the page
1. For a Lever Press; Jonathan Payne, Russelville, Logan county, Kentucky, Sept. 9.
Remarks. This lever press, it appears, has been the subject of an arbitration under the ninth section of the patent law of February, 1793, relating to interfering applications, which terminated in favour of the above named patentee. The construction of the press is pretty clearly made known in the specification, but no claim is there made to any part of it. It is intended for cotton, hay, tobacco, &c. &c. and is constructed as follows. A stout sill, from 30 to 50 feet in length has, rising from the middle of it, two upright pieces of timber 10 feet high, which serve to sustain a lever, or beam, between them of the same length with the sill, and measuring 12 by 18 inches. A stout pin, serving as a fulcrum passes through the upright cheek pieces, and through the beam. Either end of this beam may be drawn down by means of a rack and wheel work, the latter being sustained by the sill, and the former depending from the lever. A pinion, probably of 4 or 5 inches in diameter, turned by a winch, gears into a wheel of 7 feet diameter, having a pinion on its axle of 6 or 7 inches diameter, which acts upon the rack. No directions are given for using this press, but as only one end of the beam can be employed at a time, the rack and gearing must at one end be used to raise, and at the other to depress the beam, between which and the sill the pressing must, necessarily, be effected.
About this record
- Patentee
- the Journal of the Franklin Institute, Journal
- Date
- the Name and Date index of patents, USPTO records, Jim Shaw's X-patent list
- Invention
- the Name and Date index of patents
- Listed in
- the Name and Date index of patents, USPTO records, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- The patentee's full name comes from the Franklin Institute's journal.
- Burke's 1847 Patent Office list gives the same patent.