Drawings and documents
National Archives restored drawings: drawing
Fredrick A. Fairchild's Patent Drawing for a Tailor's Measurer
National Archives, Restored Patent Drawings (Record Group 241) · Full-size scan at the National Archives · Catalog record
Show the text on the drawing Hide (346 words)
Words on the drawing as machine-read by the National Archives; not checked. Useful mainly for searching.
73. MEASURING INSTRUMENTS. / [38] Tailors' Measures. / p2 / mis / CLASSIFICATION / 9219-1 / IVISION. / FREDERICK A FAIRCHILD'S / patented / 9219 X / Tailors Measurer / A.D.K. a strip passing down the centre of the Back / Tand.J. measures for the circumference of the Waest / a.D. / down the centre of the fromt. / It. measures binches from the Zowerband / d' / down in front of each / A.meavere from the upper bank d to ll cosocket bone of the teck / T. a praduated scale on the upplet cand shaving / the depression of the bolly between Hic shmilders - / 2.73.73.78 a from There APET been x to the toi of the arm back ann pront / M a class which unites the ends of the uppertanin / hiaze of 13.13 gives the centre of the backs of the coat. / it is provided with a spring scass to uccom otate / cirecosures from 13.to 73. givin a Then widthogthe back from shoulder to shoulder / itself to The expansion of the chest / D.D.D.D. measures from the upjer bured to the lower sleeving / in breathing. / Mistance from the ampit to the hip, / N. clasis for uniting the cruss / CEE measures from the frontsidentic backside Hearm- / O.O.D. se clasps sliding upon the bands for / E measures from atm to arm 272 pronz / fiving thestopsin any requiremention e / & theupper banit to the basey The neck 272 front / H from the front of the armon each side / to / round the back of the neck / upper / 1.7. Tapes for measuring from the front of the arm to the D' mensure 072 thelower bear, also to the a agecasure and rounit the back efteamthnuayees.3. / 2. Tape for measuring from the centre of the front mitte upper band to where TheH measure crosses the.A. giving the past tinn og the shouldergythe. coat / 3. Tape from centreot the back portaning the length of the shirts, to the measure infront for thesening the Cont / 4. Tas, for caking the ais tance over the hills to the K. measure behind for necepting of the coat / a SODER
USPTO scan
The patent as scanned by the USPTO
U.S. Patent and Trademark Office · Google Patents
Show the transcription Hide (902 words)
Machine transcription (LightOnOCR) of the pages as scanned by the USPTO, most of them the handwritten copies made when the records were restored after the 1836 fire. Not checked; it can misread handwriting, so compare it with the scan.
Page 1.
9219X
F. A. Fairchild.
Tailor's Measure.
Patented Oct. 31, 1835.

Page 2.
Oct. 31, 1835 9219 X 37.
Frederick A. Fairchild, Columbus Georgia
Letters Patent.
The Schedule referred to in these Letters Patent, and making part of the same, and containing a description in the words of the said Frederick A. Fairchild himself of his improvement in the Tailor’s Measurer, for laying out garments preparatory to cutting.
Be it known that I, Frederick A. Fairchild, of Columbus in the County of Muscogee and State of Georgia have made an improvement in the useful arts being an apparatus for measuring the human body for coats, overcoats, vests and other garments called Fairchild’s Measurer, for Tailor’s use, which is described as follows.
First, In the cutting of a coat due consideration must be had of the muscular changes produced in the form of the body by the enlargement or contraction and diminution, or relaxation of the muscles in their different respective positions in the actions of the body.
The apparatus used consists of two steel elastic bands of about an inch in width and as thin as maybe, one of these is intended to be passed around the chest and the other around the waist. There are clasps attached to these, in which clasps are small loops, through which strips of sheet brass are passed and by means of small thumb screws or otherwise, said clasps and strips of brass, are fixed in any convenient position in respect to each other. Let it then be imagined that the steel clasps for the chest and the waist having on each four clasps adjusted opposite to each other. Through each of the loops in these clasps is passed a strip of sheet brass three eighths of an inch wide and about two feet long being graduated in inches and parts of an inch each steel spring or band being about forty inches long a strip of the or brass of the width above mentioned is adjusted to each steel band, being of the same length so that by means of these the girth of the person’s chest and waist can be ascertained and the steel bands being placed at the greatest breadth
Page 3.
breadth of the chest and small of the waist respectively, the sheet brass strips being adjusted from of them to the steel band thus placed, two rising at the sides above the shoulders and one rising behind as high as the back of the head, one in front as high as the throat; it is obvious that these sheet brass strips may be adjusted through the loops in the clasps so as to indicate the whole length of the lines they describe and any parts of them; the measures noticing the distances on these sheet brass strips of the several points in the body to be observed in the cutting of a coat &c. — The precise space for the armpit is ascertained by means of a short piece of sheet brass strip rising up in front of each arm from the steel band band around the chest, which short pieces are connected by loop pieces over the shoulder, these pieces being secured to the steel band and to each other by clasps, loops and thumb pieces. There is another which rises up from the sides of the steel band, around the chest and passes in front of the shoulders over them and along the back of the neck in the direction of the coat collar being attached to the upright back strip by a clasp, loop and thumb screw. Besides these measures some tape measures may be attached to points of these strips and thus accurate and complete measurement may be obtained of all the requisite parts points and spaces of the body necessary to be ascertained in order to cut a coat, vest &c. fittingly. The steel bands being held together by clasps & loops and thumb screws there in as shown by the machine from which this description was taken deposited in the patent office, these bands may in effect be opened and the subject or body enveloped in this measures with readings, and the operation of adjusting these bands and the strips aforesaid may be performed with dispatch by a ready operator. The machine is to be applied to the person without a coat when the measure is to be taken for a straight body coat and with a coat on when the measure is to be taken for an over coat. For a further illustration of my invention I refer to the model and drawings of the same deposited in the Patent
Page 4.
Patent Office. The principle of this improvement which I claim as my invention, and which I desire to secure by this Patent, consists in the combination of the steel bands aforesaid with the sheet brass strips aforesaid by means of the clasps, locks and thumb screws adjustable together as aforesaid substantially as above is described.
In witness whereof I have hereunto subscribed my name before two witnesses this 22d day of October 1835.
Witnesses
Clement J. Harts
Wm. B. Elliot
H. A. Fairchild
(Drawing)
950 words
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 17 (1836), p. 349 · View the page
91. For a Tailors' Measure; Frederick A. Fairchild, Columbus, Muscogee county, Georgia, October 31.
Remarks. The claim made is to "the combination of the steel bands with the sheetbrass strips, by means of clasps, loops, and thumb-screws, adjustable together, and substantially as described." The drawings of the steel bands, brass strips, and a number of graduated tapes, have a very formidable appearance, and seem sufficient to enable a surgeon to bandage every limb in a man's body. We take it for granted that the apparatus is a very perfect one, but cannot undertake to analyze it.
DATAMP: illustration
Illustrations from DATAMP
DATAMP (Directory of American Tool and Machinery Patents), via the Internet Archive · Archived DATAMP page
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP, USPTO records
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, USPTO records, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- Burke's 1847 Patent Office list gives the same patent.