Drawings and documents
National Archives restored drawings: drawing
B.H. Pearson's Patent Drawing for a Cooking Stove
National Archives, Restored Patent Drawings (Record Group 241) · Full-size scan at the National Archives · Catalog record
Show the text on the drawing Hide (46 words)
Words on the drawing as machine-read by the National Archives; not checked. Useful mainly for searching.
126. STOVES & FURNACE / P1- / [154] Cooking Stoves. / CLASSITICATION / 9569-4 1T / EIVICTON / B. . H. .PEARSON'S / 9569X / Cooking Stove. / Patented:31March 1836. / Fig 2. / Fig1. / SB / 20 in / of / 1. / 3'2 / 8 1/2 / 3 1/2 / is / K2 / el / 27in / Fig.3.
USPTO scan
The patent as scanned by the USPTO
U.S. Patent and Trademark Office · Google Patents
Show the transcription Hide (967 words)
Machine transcription (LightOnOCR) of the pages as scanned by the USPTO, most of them the handwritten copies made when the records were restored after the 1836 fire. Not checked; it can misread handwriting, so compare it with the scan.
Page 1.
9569X
B. H. Pearson,
Cook Stove.
Patented Mar. 31, 1830.
Fig. 2.
<!-- Image content: A rectangular diagram with labeled dimensions and points. -->
- $f$
- $g$
- $i$
- $h$
- $3\frac{1}{2}$
- $5\frac{1}{2}$
- $3\frac{1}{4}$
- $j$
- $k$
- $l$
- $m$
- $c$
- $a$
- $b$
Fig. 1.
<!-- Image content: A complex diagram with multiple circular and curved sections, labeled with letters and numbers. -->
- $o$
- $l$
- $p$
- $m$
- $n$
- $s$
- $r$
- $t$
- $u$
- $v$
- $w$
- $x$
- $y$
- $z$
- $a$
- $b$
- $c$
- $d$
- $e$
- $f$
- $g$
- $h$
- $i$
- $j$
- $k$
- $l$
- $m$
- $n$
- $o$
- $p$
- $q$
- $r$
- $s$
- $t$
- $u$
- $v$
- $w$
- $x$
- $y$
- $z$
Fig. 3.
<!-- Image content: A rectangular diagram with two oval shapes inside, labeled with letters. -->
- $c$
- $a$
- $b$
- $d$
- $e$
- $f$
Page 2.
9569x
Mar 31, 1836
Benjamin H. Pearson of Warren & New Hampshire
Letters Patent.
The schedule referred to in these Letters Patent and making part of the same containing a description in the words of the said Benjamin H. Pearson himself of his improvement in the Cooking Stove.
To all whom it may concern,
Be it known that I Benjamin H. Pearson of Warren in the county of Merrimack and State of New Hampshire, have invented an improvement in the Stove intended principally for cooking, which I denominate, the open frame cooking stove, and that the following is a full and exact description thereof.
Fig 1. represents the top part; the distance from D to B, is 16 inches - from N to C, 16 inches, from F to G 27 inches, being the part over the fire place, The distance from C to B, is 26 inches from O to P 20 inches - from P to R 17 inches, & from R to E, 6 inches being the part over the back part of the stove, and the oven, K C is a damper which may be turned either to R or S, to warm the fire under No 5 and 6. - Numbers 1, 2, 3, 4, 5, 6, are circles of different sizes to be used for kitchen furniture. The distance from A to C is 32 inches from G to I, 6 inches from H to I, 38 inches, they represent the length M N and I O are dampers to throw the fire under the oven, as will be seen in Fig I I. which represents the side view of the stove, - a, b, c, e, represents the part over the fire, The distance from a to b, 20 inches, from b to c, 13 inches, from c to e, 12 inches, from e to f, 3 inches, from f to g, 17 inches, the height of the back part of the stove e, j, k, h, represent the oven situated in the back part of the stove, the distance from e to h, is 11 inches and it is 18 inches square on the top and the bottom with the exception of the fire oven now being a little elevated. The distance from a to e is 16 inches, being the back part of the fire place, The oven is situated one inch higher than the back part of the fire place and from e to h is one inch and a half, and the front part of the oven extends one inch above to k. The distance from I to m is 2 and a half inches, The distance from the bottom of the stove to the bottom of the oven is 3 inches and the same distance at
Page 3.
Mar 31, 1836
At the top of the oven to the top of the stove and the same space at the end. The top of the oven extends the whole width of the stove, the bottom and the side opposite the door leaves a space of 2 inches for the fire to pass so that the fire passes etc over the oven except on the side of the door, Fig. 7 represents the front part of the stove. The distance from A to B is 8 inches - from C to D 6 inches from E to F represents a crank on which are placed two half oval wheels for the purpose of raising the grate in the fire place formed at E with a cogwheel A & F in Fig 1. represents the flue, all the parts connected with the fire place, the top and sides are to be of cast iron, the outside of the stove with the oven is to be of sheet iron, this stove may be altered in its form and in its particular arrangement of its parts whilst those features which constitute the difference between it and other stoves for cooking and heating apartments are thus retained, it is therefore a stove which I claim as my invention, and for which I ask a patent. They consist in heating the oven on five parts - its particular situation to give a draft under the oven with an open fire place.
The damper K, C to throw the fire under No. 5 & 6 and the turning of crank with the two half oval wheels to raise or lower the grates in the fire place, whether the same be effected in the exact way which I have indicated or in any other operating upon the same principle and producing similar results.
Witnesses,
Daniel Patton
J. C. Badger
Benjamin H. Pearson
582 113
Patented
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP, USPTO records
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, USPTO records, Jim Shaw's X-patent list, Burke's List of Patents (1847)
- Burke's 1847 Patent Office list gives the same patent.