Drawings and documents
National Archives restored drawings: drawing
Samuel Tyler's Patent Drawing for a Churn
National Archives, Restored Patent Drawings (Record Group 241) · Full-size scan at the National Archives · Catalog record
Show the text on the drawing Hide (68 words)
Words on the drawing as machine-read by the National Archives; not checked. Useful mainly for searching.
31. DAIRY. / inc. Cheirl / 11- / Vibrating Churns. / amproduct / SAMUEL TYLER'S / Churn. / Paterbal give 25:1836 / LASEITICATION / 9779. / Paiented 18 / DIVISION. / 83 / 9779X / HI / Fi / Just / Reference / LThe churn box. B square morlice, C.red pieces, / D.Top of the churn. Er. legs, E, pully 03 the crasik axte. / G.The swecp. H moin to heel shafy and crank.
USPTO scan
The patent as scanned by the USPTO
U.S. Patent and Trademark Office · Google Patents
Show the transcription Hide (793 words)
Machine transcription (LightOnOCR) of the pages as scanned by the USPTO, most of them the handwritten copies made when the records were restored after the 1836 fire. Not checked; it can misread handwriting, so compare it with the scan.
Page 1.
9779X
No printed specification available
S. Tyler.
Churn.
Patented Jan. 26, 1836.

Page 2.
June 25, 1836
Samuel Tyler, of New Gloucester, State of Maine,
Letters Patent.
The schedule referred to in these Letters Patent and making part of the same containing a description in the words of the said Samuel Tyler himself of his improvement on the Churn.
To all to whom these presents shall come,
Be it known that I Samuel Tyler of New Gloucester in the county of Cumberland and State of Maine, have invented a new and useful improvement in a Machine for Churning butter from Milk and Cream and that the following is a full and exact description thereof.
I make the churn box two feet high and about six inches by eight at the top and about sixteen by eight at the bottom, the cover is fast in by nailing on the inside of the box all around three inches deep and two inches down so it may be collared round the top with thin boards. A, this box is made of pine boards one inch thick. Through the centre of the cover there is made a machine one and a half inches square. B. Through this machine is fitted the staff, or dash, by means of a wooden pin which acts as a guide preventing making it fast to the cover and allowing it to vibrate so as to nearly touch each side on the inside at the bottom of the churn. This staff rises above the top of the cover from twelve to twenty inches as the case may require. In the lower end of this staff inside of the churn there is fitted from six to ten paddles by mortising through the staff which operates upon the cream as a flat what may be substituted in its stead. I also make a frame from three to four feet long of timber two inches square with three or four pieces and two box pieces, C. These are fast together with tenons and mortises framing the box pieces eight inches asunder, one of these orlop pieces is framed into the end of the box pieces another so far on the box pieces as to leave a space between the first and second of six inches making an oblong square six by eight inches in the clear so as to fit round the top of the churn. (D) the other orlop piece is framed
Page 3.
in half way between the last mentioned top piece & the end of the bed timber, This frame stands on four legs extending outward, in the center of these bed pieces and on the top there is fitted five standards three inches wide and one and a half inches thick and eighteen inches long, these stand perpendicular (E) In the top of these standards there is fitted an iron crank, the bend of the crank is nearly in the center, between the parts on the same crank, and near the bend is fitted a pully six inches in diameter (F) in the bend of the crank there is fitted one end of a crank of sufficient length to reach the top of the before described staff, and is fitted into the top of the staff by means of a slip mortice and is so formed as to allow it to vibrate (G) On the extreme end of this frame opposite the others there is fitted a shaft and crank reaching from one bed piece over the other far enough to allow the crank to turn, on this shaft is fitted a wheel two inches thick and eighteen inches in diameter (H) I then put a band round this wheel and round the pully on the before described crank and turn the last mentioned crank which puts the machine in motion.
This machine may be moved by top wheels in the same form, The iron crank may be made double and fitted to carry or fly two dashes at the same time — This whole machine may be enlarged or diminished as the case may require by observing a regular proportion.
What I claim as my own invention and not previously known is the above described machine is the large wheel, the crank and pully and the sweep together with the frame which may be put on or taken off the chain at pleasure; is the uniting the several principles to make a machine as now united.
Witness my hand
a. Angelino Lane
Joseph Turner
810 n7
Drawing 11
Published accounts: journal notice
Notice in the monthly list of patents
Journal of the Franklin Institute, new ser., vol. 18 (1836), p. 287 · View the page
464. Churn.-Samuel Tyler, New Gloucester, Maine,
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP, USPTO records
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, USPTO records, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- Burke's 1847 Patent Office list gives the same patent.