Drawings and documents
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 12 (1833), p. 18 · View the page
(See specification, p. 181, vol. xi.) 3. For machinery for Sawing and Rounding Staves; Philip Cornell, Weedsport, Cayuga county, New York, January 5.
Remarks. (See the specification.)
Published accounts: journal notice
Notice in the monthly list of patents
Journal of the Franklin Institute, new ser., vol. 12 (1833), p. 34 · View the page
We must, in relation to this apparatus, make short work of a long story; the patentee having described his machine in all its lengths, breadths, and thicknesses, without informing us which of its parts constitute the improvements. The clapboards are to be sawed by circular saws, there being a carriage to sustain and move the log to be cut; an apparatus to cause the clapboards to have the proper slope, from their thick to their thin ends, and many other things which must, at present, remain unmentioned. There are a number of machines for the same purpose, with circular saws, and other appurtenances in common with this, there being little or nothing in it which could be properly made the subject of a patent, with the exception of the peculiar combination and arrangement of the parts. SPECIFICATIONS OF AMERICAN PATENTS. Specification of a patent for an apparatus for smoothing and rounding Staves of all descriptions, being an improvement on the machinery for sawing and jointing staves formerly patented. Granted to PHILIP CORNELL, Weedsport, Cayuga county, New York, January 5, 1833.
Published accounts: specification
Specification printed in the Journal of the Franklin Institute
Journal of the Franklin Institute, new ser., vol. 12 (1833), p. 35 · View the page
Text of the specification as printed in the Journal, from OCR; not proofread.
Specification of a patent for an apparatus for smoothing and rounding Staves of all descriptions, being an improvement on the machinery for sawing and jointing staves formerly patented. Granted to PHILIP CORNELL, Weedsport, Cayuga county, New York, January 5, 1833. To all whom it may concern, be it known, that I, Philip Cornell, of Weedsport, in the county of Cayuga, and state of New York, have invented an improvement in the machinery for sawing and jointing staves, for which a patent was granted unto me on the eleventh day of April, in the year one thousand eight hundred and thirty-two; which improvement, however, may be used independently of the apparatus described in the specification of that patent, either alone, or in combination with other machinery for preparing staves. And I do hereby declare that the following is a full and exact description of my said improvement. The apparatus which I am about to describe I have substituted for that represented as figure 4, in the drawing accompanying my patent for machinery for sawing and jointing staves, above alluded to; and when conjoined with this apparatus it serves to form and smooth the outside of the stave, whilst it is being sawed, and is yet on the block. In a suitable frame I place an upright spindle of iron, or other metal, the lower end of which runs in a step, fixed for the purpose, and the upper end on a centre, or in a collar, adapted thereto. This spindle I drive by means of a whirl and band connected with other parts of the machinery. Near the top of the spindle, and at distances from each other equal to the width of the widest stave to be dressed, I fix two wheels, or discs, the spindles passing through holes in their centres, and being firmly attached to them. These wheels, or discs, may be five or six inches in diameter, or of such other size as may be preferred. To the edges of these I attach one, two, or more knives, or cutters, extending from one to the other, said knives curving inwards towards the spindle, so as to adapt them to the curvature of the stave. When a rapid motion is given to these knives, they will dress the stave perfectly true and smooth. Instead of the wheels, or discs above described, arms may project out from the spindle, to which the knives may be attached by screws or otherwise. What I claim as my invention, and for which I ask a patent, is the application of a knife, or knives, constructed and operating upon the principle herein described, to the smoothing and rounding of staves of all kinds, either as they are being sawed and are yet on the block, or otherwise. PHILIP CORNELL. LIST OF FRENCH PATENTS. A List of Patents for Inventions, Improvements, and the introduction of Foreign Inventions or Improvements, granted in France during the second quarter of the year 1831.* [TRANSLATED FOR THIS JOURNAL.t] Archbald, of England, represented at Paris by M. Bloque, April 2nd, (15 years.) A direct method of obtaining crystallized sugar from the juice of the cane. (P. Invent.) G. Aubergier, apothecary, Clermond Ferrand. A machine for making grooved bricks. (P. Invent.) P. L. Beauduceau, mechanician, Paris, April 27th, (15 years.) A hydraulic wheel, for raising water to the height of its axis; moved by horses walking in the interior of a wheel. (P. Invent. Improv.) C. Beaumont, surgeon, Paris, April 14th, (5 years.) An apparatus which he calls a hydrostatic moderator, for regulating the effect of divers moving powers. (P. Invent.) Ol. Benoist, farmer, at Plailly, represented at Paris by M. Armanville, April 2nd, (5 years.) A harrow called a trycicle harrow, furnished with three wheels. (P. Invent. Improv.) M. Bétoulle, land surveyor, at Limoges, represented at Paris by M. Armonville, Secretary of the Conservatory of Arts and Trades, April 13th, (5 years.) An instrument furnished with telescopes, and intended to measure distances without the aid of a chain, which instrument he calls a telegraphic cross-staff. (P. Invent.) L. Brunier, architect, Paris, April 27th, (15 years.) A hydraulic machine, called a continual hydromotor. (P. Improv.) Brian, Donkin & Co., mechanical engineers, London, represented by M. Sauvage, at Arras, May 7th, (5 years.) An improvement in the machinery for manufacturing paper. (P. Import.) J. L. Cabias, curate at Potigny, May 21. A method of executing certain pieces on the organ, without any knowledge of the instrument. (P. Invent.) J. C. Chabert, Paris, May 19th, (5 years.) A chimney with a fire place movable at will, or the art of saving the greatest possible quantity of heat. (P. Invent. Improv.) G. Cipeyre, wheelwright at Nimes, represented at Paris by M. Arnaud, May 19th, (5 years.) A machine with an ompholienous wheel, impelled by human hands, by means of two handles acting alternately; adapted to the spinning of silk. (P. Invent.) J. C. Clave, mechanician at Sadan. May 19th, (10 years.) A ma• In the following list P. Invent. denotes a patent for an invention. P. Invent. and Improv. a patent for invention and improvement. P. Improv. a patent for an improvement. P. Import. a patent for the importation, or introduction of a foreign invention. P. Import. Improv. a patent for introduction and improvements. P. Invent. Import. a patent for invention and importation. † At the request of the Committee on Publications. On the Siphon. chine by him called hydro atmospherical; applicable to every kind of moving power. (P. Invent.) Cl. Compagnot, a maker of wooden shoes, Paris, April 14th, (5 years.) A new kind of shoe, rendered impervious to water by a thin piece of cork placed between two leather soles. (P. Invent.) Couleaux & Co., Molsheim, May 19th, (10 years.) Improvement in the making of coffee mills. (P. Import.) G. F. Courboulis, principal of a boarding school at Vouziers, Department of Ardennes, May 25th. A method of reading and spelling, which he calls Ardennesian. (P. Invent.) C. P. R. Dalmenasse, Paris, May 10th, (10 years.) Improvement and addition to the patent obtained the 28th November, 1829, by Viriaud, jr., whose right he holds. System of carriage which he calls, by impulse. (P. Improv.) P. F. Delacroix, manufacturing chemist, at Rouen, May 3d, (10 years.) A chimney apparatus called multiplier, calculated to distribute heat in adjoining and upper apartments. (P. Invent.) A. G. Demilly, Paris, May 7th, (5 years.) Cast iron vessels, which he calls heat bearers, for heating the external air by means of a peculiar mechanism. (P. Invent. Improv.) C. A. Dronsart, Neuilly, near Paris, June 30th, (5 years.) Method of manufacturing a stuff called by him Philippine, for hats, hangings, &c. (P. Invent.) P. R. Duchesne, umbrella manufacturer, Paris, May 30th, (5 years.) Two different applications of a system of eccentric umbrellas and parasols. (P. Invent.) Enn. Felissent, Lyons, June 30th, (15 years.) An apparatus for desiccation, by means of heated air, by direct contact with fire. (P. Improv.) T. D. Francfort, Paris, April 27th, (15 years.) A process for laminating alloys of copper, and tin, and brass, so as to make brass sheathing for ships. (P. Improv.) L. A. Gautier, apothecary, Havre, Mav 21st, (10 years.) A new process for making beer. (P. Invent.) C. Gouche, merchant, Paris, May 19th, (10 years.) Composition of a starch which he calls, Prussian economical blue starch, to be used in dressing linen, muslin, lace, &c. (P. Invent.) A. J. V. Gros, Paris, May 21st, (5 years.) A method of painting on hair cloth. TRANSLATIONS FROM FOREIGN JOURNALS. Description of the different kinds of Siphons.* [TRANSLATED FOR THIS JOURNAL.†] The siphon is a bent tube, with legs of unequal length, used for transferring liquids from one vessel to another. This instrument, * Journal des Connaissances Usuelles, No. 92. † By request of the Committee on Publications. On the Siphon. when once put in operation, is self-acting. The methods of putting it into operation have given rise to a variety of modifications in the form of the instrument, which we purpose now to notice. Fig. 1. Fig. 1 represents the most simple siphon, being a bent tube, one of the branches or legs of which is longer than the other. To use this instrument, place the short branch into the vessel from which the liquor is to be transferred, and draw the air out of the other leg by the mouth, the liquid will rise in the shorter leg and pass over into the vessel placed for its reception below the end of the longer leg. The same effect may be produced by first filling the tube with a portion of the liquid to be decanted, then turning the syphon over, having stopped, with the fingers, the orifices of the two legs; immersing the shorter leg in the vessel, and taking off the finger, the liquid contained in the tube will pass into the vessel placed below the longer leg, and be replaced by the contents of the vessel. This method cannot, of course, apply when corrosive liquids are to be drawn. B Fig. 2. C Fig. 2 represents a siphon which may be conveniently used in the transfer of many corrosive liquids. It is filled by pressure. To put it in operation a vessel must be employed which can be closed at the top by a cover or cork. Adjust a tube, B, to the cover or cork through which the siphon passes, and blow through the upper end of the tube; the pressure of the air on the surface of the liquid will force it up into the siphon C. The siphon shown in fig. 3 may be conveniently used when the liquid is to be drawn at intervals. Let the tube ABCD, filled with water, or with the liquid to be drawn, be plunged into the reservoir, the end A having been previously stopped. If the siphon be then inclined so as to bring the mouth, D, below the level of the liquid within the reservoir, the liquid will run through the tube. By raising the end D above that level, the flow of the liquid will be stopped. A B Fig. 3. C D Fig. 4. Fig. 5. By bending the tube as in fig. 4, the instrument is easily kept from emptying itself, when taken out of the liquid, and when replaced it will continue to draw. The same effect is produced by the Wirtemburg siphon represented in fig. 5. By a funnel shaped reOn the Siphon. ceptacle placed on the top of this siphon it may be conveniently filled by pouring some of the liquid to be drawn, or water, when dilution is not material, into the funnel or top of the tube, and duly inclining the delivering branch of the instrument; the funnel is then stopped. Fig. 6. B Fig. 7. D E C Fig. 8. A Fig. 9. C F F The siphon of M. Collardeau is shown in fig. 6. The funnel in this instrument is attached to a bent tube. The operation is begun by pouring some of the liquid to be drawn off into the funnel. The flow takes place by jerks until the air is carried off, when it becomes regular. By the addition of a stop-cock to the extremity of the longer branch of this siphon, it can be made to draw and stop at pleasure. Fig. 7 represents a modification of the siphon which is filled by suction. Introduce the end, A, of the tube into the fluid to be drawn off, and stop the opening C, raising B higher than D; apply the mouth at E, and suck until the bulb F is filled, or nearly so; stop, quickly, the aperture E, and open the end C of the siphon, which will begin to draw. This is a very useful instrument for drawing off a corrosive liquid, or one in which there is any sediment. Fig. 8 is a safer instrument of the same sort with that just described. It is put in operation by immersing the aperture A in the liquid to be drawn off, stopping the extremity C, and producing a strong suction by applying the mouth at F; the liquid ascends and fills the siphon which begins to act as soon as the aperture C is no longer stopped. The point of junction of the two tubes must be held lower than the level of the liquid to be drawn off. The siphon shown in fig. 9 is a very convenient instrument for drawing off a small quantity of a liquid. The liquid is raised into it by rarifying the air in the bulb F. To effect this, after dipping the end A into the liquor to be drawn, apply the flame of a candle to the ball F, then stop the aperture C, let the ball cool, holding it higher than any other part of the tube: as the air in the bulb contracts by cold, and the liquid ascends and passes the highest point of the bend, the finger is removed from C, the liquor will pass down the longer leg, and be discharged at C. A C Observations on the Deviation of the Compass; with examples of its fatal influence in some melancholy and dreadful shipwrecks.* By the Rev. WILLIAM SCORESBY, F. R. S., &c. Communicated by the Author. The deviation of the compass on shipboard, is that error, or anomaly in the needle, from the correct magnetic meridian, produced by the magnetic condition of the vessel. It is but a modern discovery, and, until within a very few years, did not obtain much consideration: and even now, is very far from having obtained that general attention to which its great importance in practical navigation so abundantly entitles it. A few personal observations, and well ascertained facts, will be sufficient to prove that a correct knowledge of the deviation must greatly contribute to the safety of persons traversing the ocean; and that ignorance of it must expose all persons engaged in commercial transactions by sea to a fearful risk, (a risk by no means generally appreciated or accredited,) of life and property. The amount of deviation necessarily varies, because of the unequal character of the disturbing force, not only in different vessels, but in the same vessel in every change of magnetic dip, and on every change of course. In very high magnetic latitudes, the deviation may be such as to influence the compass more than the directive action of the earth; but in equatorial regions it will be generally so inconsiderable as to be of little importance in practical navigation. On two or more points of the compass, the deviating force being coincident in direction with the earth's magnetism, is not observable, (these are denominated "the points of change;") whilst its influence rises to a maximum in the ratio of the sines of the course (nearly) on both sides of the points of change. Most commonly the points of change will be found to occur when the direction of the ship's head is north or south, or nearly so; and the maximum on or near an east or west course. But to this rule there are many exceptions. In an ordinary way, a vessel sailing up the English Channel, steering E. or E. by S., will probably have only 25° or 26° of westerly variation, instead of 27° or 28°; the difference of 2° or 3º, or about a quarter of a point, being the effect of the local attraction, which, in thick weather, or during the night, must produce a serious error in the reckoning. In going down the Channel, on the contrary, the actual variation of the compass on board the vessel will probably be 29° or 30°, instead of 27° or 28°, the variation on shore, which difference, if unknown to the captain or pilot, must throw the vessel considerably to the southward of her position. Even more than this quantity of error was fully proved by Mr. Bain, whose "Essay on the Deviation" contains a number of useful practical observations on * From a "Lecture on the Deviation of the Compass," delivered at the Royal Institution at Liverpool, by Captain (now the Reverend) William Scoresby, F. R. S.; January 23, 1822. On the Deviation of the Compass. the important subject on which it treats;* and a still larger quantity of error, amounting, when at a maximum, to six or seven degrees of deviation, or even more, has subsequently been discovered in very many of our ships of war under the magnetic dip and condition of our own coasts. Bain also found, in navigating the river St. Lawrence, that it was necessary to steer a different course coming down from the opposite one he steered on going up. Owing to this circumstance (the local attraction,) one of our ships of war, the Zealous, had a very narrow escape in going up that river. During a fog, this vessel ran so near the shore, not far from Cape Chat, that she was in nineteen fathoms water; and had not the fog fortunately cleared at the moment, she would probably have been wrecked. Many of the losses that have occurred in the St. Lawrence are, he reasonably concludes, attributable to the local attraction. In crossing the Atlantic to the W. or SW., vessels will almost always be found to the southward and eastward of their reckoning; and in an equal degree if passing to the north-eastward or eastward, the error being still towards the SE. In the voyage to Greenland, I have invariably found the deviation acting with the most marked effects; so much so, indeed, for some years before I knew any thing about the cause, that I found it necessary to allow only two points westerly variation outward, instead of two and a half, and three homeward, in order that some sort of agreement might be found between the reckoning and the actual place of the ship. The total effect of the deviation on a passage from Spitsbergen to England commonly amounts to four or six degrees of longitude; and almost all strangers to that navigation, unprovided with chronometers, instead of making Shetland, the place at which the whalers aim, fall upon or near the coast of Norway, 160 or 180 miles distant. Even Captain Phipps, on his return from his Polar discovery, committed this error, but its cause was then unknown. This error was usually attributed to the operation of an easterly current-but it undoubtedly belongs in a great degree, if not entirely, to the deviation. The ship Baffin, which I recently commanded in the Greenland fishery, possessed a very large and uncommon measure of local attraction. The first intimation which we had of this dangerous influence, was on passing on a north-easterly course to the eastward of the Faroe Islands. In one day's run, during a gale of wind, the difference of latitude, as found by observation, was less by almost a degree than that determined by calculation, an error which, if ascribed entirely to the local attraction on the course steered, would have indicated a quantity of deviation amounting to nearly two points! Though this amount, however, was subsequently found to be considerably in excess, yet the absolute quantity in a high latitude, where the dip of the needle was about 80°, proved to be 17º on a S. SW. Mr. Barlow's admirable investigations on the Laws of the Magnetic Deviation were not in my hands when this lecture was delivered. VOL. XII.-No. 1.-JULY, 1833. 6 On the Deviation of the Compass. course! The dangerous influence of such a deviation will be readily appreciated by a simple example. Suppose the Baffin to have sailed with a fair wind 100 leagues on a S. SW. course, per compass, (the variation being, say, 42° W.) and then back again 100 leagues on a N. NE, course, per compass, it is evident that, if there were no deviation, or other cause of error, she would return exactly to the point from whence she started. But, in consequence of the deviation only, her actual position would prove to be 123 miles to the eastward, and 55 miles to the northward of the place from whence she set out the deviation, as above, being 17° southerly when steering S. SW., and 84° easterly, as also determined by observation, when steering N. NE. Or, supposing the same ship to sail 200 leagues on a S. SW. course, (a course often pursued on the homeward
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847), the Journal of the Franklin Institute, Journal
- Burke's 1847 Patent Office list gives the same patent.