Drawings and documents
USPTO scan
The patent as scanned by the USPTO
U.S. Patent and Trademark Office · Google Patents
Show the transcription Hide (694 words)
Machine transcription (LightOnOCR) of the pages as scanned by the USPTO, most of them the handwritten copies made when the records were restored after the 1836 fire. Not checked; it can misread handwriting, so compare it with the scan.
Page 1.
UNITED STATES PATENT OFFICE
PTO – BOYERS, PA DUTY STATION
PAGE NOT AVAILABLE
PATENT NUMBER X2953 FOR THE ISSUE DATE 5/27/1818 HAS BEEN SCANNED/LOADED, BUT WITH MISSING PAGE(S). UPON RECEIPT OF THE MISSING PAGE(S), THE ENTIRE DOCUMENT WILL BE RESCANNED. THIS NOTICE IS FOR THE MISSING PAGE CONTAINING:
Missing All Drawings
DATA CONVERSION OPERATION
BOYERS, PA
Page 2.
X2953 5-27-1818 461
Sidon Davis
Letters Patent. May 27, 1818.
The schedule referred to in these Letters Patent and making part of the same containing a description in the words of the said Sidon Davis himself of his improvement in the Plough.
My Improvements consist of 1st: The plough is made entirely of wrought iron except the mould plate which is made of cast iron and the landlay or pad which the ploughman takes hold of, they are made of iron.
2d: This plough is made of sufficient strength without being cumbersome and heavy, chiefly in consequence of the braces being made of two pieces, one the principal one being about 3 inches deep, 1/2 inch thick near the middle and largest part, and tapered to a proper size at each end. The other part or brace is from 1/2 to 3/4 of an inch in thickness and about 13 inches in width from end to end. These two parts are joined together with about 6 screw bolts passing through the braces and beam, with 4 or 5 thimbles or regulators to keep them in their proper places. The braces near the middle is about 3 or 4 inches distant from the beam, with a smaller mortice attached to the braces in the inside. This mortice if placing the coupler with it, by leaving over the line has a tendency to take the furrow with more ease, and throw it from the land side; this with the manner of fastening it, hereafter to be described, I deem a singular advantage over the common mode.
3d: The coupler is fastened by means of an iron rod, with a broad hook, which catches on the shank of it, here or at the braces; and passing through a thimble attached to the shank with a thumb screw. The advantage of this is that it keeps the coupler perfectly steady, without wedging except only at the sides.
4th: I use a chain or rod, passing from the main bolt in the beam, to the end of the round, or near the top of the right hand stilt. This answering two good purposes, it braces the stilt, and bears the line up, does not to be caught under the furrow.
5th: I make use of a bow, passing between the stiles at about 7 or 10 inches from the top or round, and attached to the upper round in the middle by a rivet.
Page 3.
X2953
462
7. The share is made pretty much in the usual form, but without a socket, in lieu of which, I cut through the plate, and turn up an ear, about 3/4 or one inch high, which coming against the side of the sheath, keeps it equally steady, as if there were a socket.
8. The mould plate is attached to its sheath, by two or more screw bolts, and to the brace, which passes from the sheath, near the share to the main bolt by the side of the coulter, likewise by one screw bolt near the sheath,
9. I place my false coulter between the mould plate and the brace, which also assists, in keeping the plough clean.
10. I fix my clevis in such a manner, as to be able to give the plough more or less depth of land.
11. The left hand or land stilt is fastened to the beam by two or more screw bolts, by which the land of the plough is regulated.
12. Though I have here given certain particulars, yet there may be varied to suit the fancy of the farmer, without materially altering the principle of my improvements.
Witness
Simon Davis
5/6/05
Mr. Vealey
Mr. Elliott
E. A.
Capt.
About this record
- Patentee
- DATAMP
- Date
- DATAMP, Burke's List of Patents (1847)
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, USPTO records, Jim Shaw's X-patent list, S. A. Elliot's printed list of patents, Burke's List of Patents (1847)
- The sources give different dates; the date shown is the one most of them agree on.
- The date conflict was settled by Burke's 1847 list.
- S. A. Elliot's printed list of patents gives the same name and date.
- Burke's 1847 Patent Office list gives the same patent.