Drawings and documents
USPTO scan
The patent as scanned by the USPTO
U.S. Patent and Trademark Office · Google Patents
Show the transcription Hide (830 words)
Machine transcription (LightOnOCR) of the pages as scanned by the USPTO, most of them the handwritten copies made when the records were restored after the 1836 fire. Not checked; it can misread handwriting, so compare it with the scan.
Page 2.
United States Patent
Patent No.: X5878
**John A. Wheeler, Pittsford, Monroe Co., New York,
Letter Patent,**
The Schedule referred to in these Letters Patent and making part of the same containing a description in the words of the said John A. Wheeler himself of his improvement in Water Wheels,
To all Persons to whom these presents shall come John A. Wheeler of the Town of Pittsford, County of Monroe State of New York Sends Greeting. Be it known that I, the said John A. Wheeler have invented constructed & applied to use, new & useful improvements in Water Wheels, which improvements are contained in a Machine, called by me the “Union Water Wheel” and are specified, together with the wheel in the words following, viz: The Wheel containing said improvements is a horizontal wheel, & may be made any number of feet in diameter according to the head of water and the purpose to which the wheel is to be applied. The size of the wheel selected for description herein is six feet in diameter and eleven inches in depth, but the depth of the wheel and diameter vary according to circumstances. The wheel has 11 arms, about four feet long, nine inches wide & three inches thick locked together with a dovetail so as to form a square in the centre of about sixteen inches, to receive the upright shaft when the same is made of wood, but when an iron shaft is used the square is to be made proportionably smaller, said arms to extend thru the inner rim. There are two rings about nine inches apart each eleven inches wide being the whole depth of the wheel and three inches thick, the outer ring enclosing the whole of said wheel. Between said rings are cast iron buckets of about one fourth of an inch thick & let into each ring about two fourth of an inch but said buckets may be made of other iron or wood. The buckets are an irregular concave and the part of the buckets at the outer rim or the side on which the water acts, is twelve inches from
Page 3.
United States Patent
Patent No.: X5878
a line drawn perpendicular from the top of the buckets to the lower part of the buckets at the inner rim is five inches from a line drawn perpendicular from the top of the buckets, the upper edge of the buckets from one rim to the other to be straight. The buckets are to be so made & placed in the rims of the wheel, that a line drawn perpendicular from the top of the centre of the buckets will cut the centre of the buckets one inch and a half from the top, which inch & a half of the top of the buckets, is to be a little concave and that two inches from the top, the concavity from outside to inside to be about one fourth of an inch & nine inches from the top the concavity from the outside to the inside to be about three fourths of an inch & to continue the same to the bottom, each side of the buckets is to be a true curve, except one inch and a half at the top, the curvature on the outer edge is about one inch and the curvature on the inner edge is about three fourths of an inch & this difference arises from the outer edge of the buckets being longer than the inner, but the concavity & curvature to be varied according to the depth of the wheel which may be more or less than eleven inches. The buckets to be placed from twelve to fifteen inches apart. The wheel may be made wholly of iron or wholly of wood, or it may be made partly of iron & partly of wood.
The specific new & useful improvements herein before described and claimed by me as the inventor, are the following. First: The manner of making & putting together the arms. Second: The iron buckets. Third: The shape of the buckets. Fourth: The manner of letting them into the rims. The advantage of this wheel over all others for the same purpose, is that the water acts and reacts upon the buckets in such a manner as greatly to increase the power. The iron buckets wear smoother, are more durable & being thinner have a less effect in breaking the current of water, and the manner of letting the buckets into the rims, & of making and
Page 4.
United States Patent
Patent No.: X5878
putting the arms together, under the wheel firmer and more durable
Witness
Elias B. Holmes
Ira Bellows
John R. Wheeler
(832 words)
(Patented 15th March 1830)
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 5 (1830), p. 368 · View the page
22. For a Horizontal Water Wheel, called the "Union Water Wheel;" John R. Wheeler, Pittsford, Monroe county, New York, March 15.
Remarks. A wheel of six feet in diameter is selected for the purpose of giving a description of the proportionate measurements of one of any other dimensions. Two rims are made, each eleven inches in depth, the outer rim forming the exterior of the wheel, the inner one of such diameter as to allow a space of nine inches between them; this space is to be occupied by the buckets, which are recommended to be of iron, and are to be let into each rim, in grooves of half an inch in depth. The buckets are not to be inclined planes, but are to be curved. The inner framing of the wheel consists of four pieces of plank, which are halved and grooved together, so as to leave a square hole for the vertical shaft to pass through, whilst their ends project out, and form the arms which are grooved into the inner rim. The claims are to "1st. The manner of making and putting together the arms." "2nd. The iron buckets." "3d. The shape of the buckets." "4th. The manner of letting them into the rims." We see no novelty in either of these, excepting it may be in the third, and in this nothing with the exception of the particular kind of curve designated, which may certainly be departed from without injury to the wheel, and probably with advantage.
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP, USPTO records
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, USPTO records, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- Burke's 1847 Patent Office list gives the same patent.