Drawings and documents
National Archives restored drawings: drawing
I. Jenning's Patent Drawing for a Spirit Lamp
National Archives, Restored Patent Drawings (Record Group 241) · Full-size scan at the National Archives · Catalog record
Show the text on the drawing Hide (75 words)
Words on the drawing as machine-read by the National Archives; not checked. Useful mainly for searching.
rl TTINGS. / Vapor Burners. / Heat Conducting / balorific Wapatherners. / Vol. 12 page-27 / I. JENNINGS / CLASSIFICATION / + +0899 / Spirit I, amp / DIV ISION. / Patented s "Aug.1831. / A Tube / B. Section Tube entarged / containing the Fibrous substance / 0/2 Strickland d Del / Patent office June 30th 1841 / Made under the direction of the Commissioner of / Patients in conformity with ach of 3 "March 1834 / MLSumorth / Commignous of Patents
USPTO scan
The patent as scanned by the USPTO
U.S. Patent and Trademark Office · Google Patents
Show the transcription Hide (548 words)
Machine transcription (LightOnOCR) of the pages as scanned by the USPTO, most of them the handwritten copies made when the records were restored after the 1836 fire. Not checked; it can misread handwriting, so compare it with the scan.
Page 1.
6680X
I. JENNINGS.
SPIRIT LAMP.
Patented Aug. 1, 1831.
NO PRINTED COPY OF SPECIFICATION IN OFFICE.
Page 2.
Aug. 1, 1831 27.
Isaac Jennings X 6680
The Inventor refers to his Letter Patent and making part of the same containing a description in the words of the said Isaac Jennings himself of his improvement in Lamps for burning combustible ingredients.
To all persons it may concern, be it known that I, Isaac Jennings of the City of New York have invented an improvement in the common lamp, which adapts it especially to the combustion of the combination of alcohol and of spirits of turpentine, and of other essential oils and ingredients, for the use of which ingredients Letters Patent of the United States have been already issued to me and which improvement in the lamp is also applicable to the combustion of other combustible ingredients not specified in the Letter Patent above alluded to. And I do hereby declare that the following is a full and exact description of my said improvement in the lamp.
Instead of the tube constructed in the ordinary manner, for containing the cotton or other wick which is in them allowed to project through the tube or burner, and lighted at the top thereof, I make a loop or other tube which I cause to rise to a much greater height above the reservoir, or body of the lamp than is usually done, say for example to the height of two inches. The upper end of this tube I close entirely or sufficiently with a small hole therein of such size as may suit the ingredients to be burned; but not generally exceeding one thirtieth of an inch in diameter. Through the sides of the said tube and at about half an inch from its lower end, I then insert the wick.
Page 3.
X6680
body of the lamp. I drill four or any other number of small holes. A tube thus constructed forms the main feature of my improvement, and in order to use this lamp, I insert a wick of cotton, a bundle of fine tow, or any other fibrous material, which will raise the fluid from the lamp by capillary attraction; allowing the wick to rise to the upper end of the tube, and end to descend into the fluid, the vapour of which is to be burnt. When this lamp is to be lighted all that is necessary is to apply flame to the small opening above described. When the vapour which escapes therefrom will be inflamed, and the heat generated by this inflammation operating upon the tube will increase the evaporation so as to produce a brilliant light without the destruction of the wick or other fibrous substance.
What I claim as new and as my improvement in the lamp and which is applicable to such lamps as are now in use is the tube or burner for containing the wick or other fibrous substance, constructed in the manner or upon the principle herein before explained.
Witness
Mr. J. Jones
Walter W. Magruder
Sarah Jennings
T 320 wds.
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 9 (1832), p. 111 · View the page
2. For an improvement in Lamps; Isaiah Jennings, city of New York, August 1.
Remarks. (See the specification.)
Published accounts: specification
Specification printed in the Journal of the Franklin Institute
Journal of the Franklin Institute, new ser., vol. 9 (1832), p. 138 · View the page
Text of the specification as printed in the Journal, from OCR; not proofread.
Specification of a patent for an improvement in Lamps for the combustion of evaporable fluids. Granted to ISAIAH JENNINGS, of the city of New York, August 1, 1331. To all whom it may concern, be it known, that I, Isaiah Jennings, of the city of New York, have invented an improvement in the common lamp, which adapts it especially to the combustion of the combination of alcohol and spirits of turpentine, and of other essential oils and ingredients, for the use of which ingredients letters patent of the United States have been already issued to me, and which improvement in the lamp is also applicable to the combustion of other evaporable ingredients not specified in the letters patent above alluded to. And I do hereby declare that the following is a full and exact description of my said improvement in the lamp. Instead of a tube, constructed constructed in the ordinary manner, for conThe first English Steam-boat. taining the cotton, or other wick, which is in them allowed to project through the tube, or burner, and lighted at the top thereof, I make a brass, or other tube, which I cause to rise to a much greater height above the reservoir, or body, of the lamp than is usually done, say, for example, to the height of two inches. The upper end of this tube I close entirely, or simply drill a small hole through, of such size as may suit the ingredients to be burnt, but not generally exceeding one-thirtieth of an inch in diameter. Through the sides of the tube, and at about half an inch, more or less, from its lower end, where it joins the body of the lamp, I drill four, or any other number of similar holes. A tube thus constructed forms the principal feature of my improvement; and in order to use this lamp, I insert a wick of cotton, a bundle of fine wire, or of any other fibrous material which will raise the fluid from the lamp by capillary attraction; allowing the wick to raise to the upper end of the tube, and to descend into the fluid the vapour of which is to be burnt. When this lamp is to be lighted, all that is necessary is to apply flame to the small openings above described, when the vapour which escapes therefrom will be inflamed, and the heat generated by this inflammation operating upon the tube, will'increase the evaporation so as to produce a brilliant light, without the destruction of the wick, or other fibrous substance. What I claim as new, and as my improvement in this lamp, and which is applicable to such lamps as are now in use, is the tube, or burner, for containing the wick, or other fibrous substance, constructed in the manner, or upon the principles, hereinbefore explained. ISAIAH JENNINGS. The first English Steam-boat. THE following description of the first steam-boat, with the accompanying drawing, is extracted from an interesting little pamphlet just published by Mr. Effingham Wilson, entitled "An Account of the Origin of Steam-boats, in Spain, Great Britain, and America; and of their introduction and employment upon the River Thames, between London and Gravesend, to the present time." In enumerating the early practical philosophers of that sublime agent, steam, we regret that the author of the pamphlet has omitted to include the name of the French engineer, PAPIN. If the writer be not already apprised of this inaccuracy, he will find an account of the man and of his work, in the "Recueil Industriel," No. 54, for last June, * in one of the series of papers upon steam engines, written by Monsieur Arago, who, with some show of justice, claims, on behalf of Pepin, the honour of being the first to apply the agency of steam for the purposes of navigation. Jonathan Hulls' work was printed in the year 1737, Papin's in 1695-42 years anterior to Hull's. In a subsequent edition of his * See vol. iv. of this journal, p. 363. The first English Steam-boat. entertaining and tasteful little book, our author will doubtless refer to the paper we have quoted, and, (if he feel that Monsieur Arago has made out his case,) render justice to the foreigner, on the score of priority of invention. At all events, this is the earliest known drawing of a steam-boat. "The object now to be noticed, is the first steam-boat projected in Great Britain, by Jonathan Hulls, who obtained a patent for his invention, dated the 21st day of December, 1736. "In the following year he published a tract,* containing a description of his machinery, the title of which is presented to the reader at length, as it contains the interesting fact in the history of steam navigation, that the first attempt was directed to the single purpose of towing ships. 'A description and draught of a new invented Machine, for carrying Vessels or Ships out of, or into, any Harbour, Port, or River, against Wind and Tide, or in a Calm, for which his Majesty has granted Letters Patent, for the sole benefit of the Author, for the space of fourteen years. By Jonathan Hulls. London: Printed for the Author. 1737.' "From this authentic source the most ample details may be obtained; and in justice to the ingenious inventor, such as it is adviseable to extract shall be given in his own words. "The author introduces the description of his engine and the boat machinery, with the following general observations: Whereas several persons concerned in the navigation have desired some account of my invention for carrying ships out of, and into, harbours, ports, and rivers, when they have not a fair wind. But I could not fully describe this machine without writing a small treatise of the same, in which I shall endeavour to demonstrate the possibility and probability of the matter undertaken. There is one great hardship lies too commonly upon those who propose to advance some new, though useful scheme, for the public benefit.. The world abounding more in rash censure, than in a candid and unprejudicial estimation of things, if a person does not answer their expectations in every point, instead of friendly treatment for his good intentions, he too often meets with ridicule and contempt. But I hope this will not be my case, but that they will form a judgment of my present undertaking only from trial. If it should be said that I have filled this tract with things that are foreign to the matter proposed, I answer, there is nothing in it but what is necessary to be understood by those that desire to know the nature of that machine that I now offer to the world, and I hope that, through the blessing of God, it may prove serviceable to my country.' Then follows a long explanation, with definitions and demonstrations of the nature of the powers called into action, for which the reader is referred to the work itself; omitting the full recital here, because * This tract has been reprinted by Mr. Partington at the end of his Lectures on the Steam Engine, and it is introduced there with the following note. "This highly curious tract, which the editor has been permitted to copy, throws considerable light on the history of steam navigation. Its great rarity, however, has hitherto prevented its contents becoming generally known to the scientific world, a single copy having been sold for more than three guineas." The first English Steam-boat. it is more desirable to proceed at once to the description of the boat and machinery." Fig. 1. U a Ti R P Fig. 2. H LD TE Tr H B EID CL I Explanation of the wood engraving representing the first Steam-boat projected in England. Fig. 1. In some convenient part of the tow-boat there is placed a vessel about two-thirds full of water, with the top close shut. This vessel being kept boiling, rarifies the water into steam; this steam being conveyed through a large pipe into a cylindrical vessel, and there condensed, makes a vacuum, which causes the weight of the atmosphere to press on this vessel, and so presses down a piston that is fitted into this cylindrical vessel, in the same manner as in Mr. Newcomen's engine with which he raises water by fire. P. A pipe coming from the furnace to the cylinder. Q. A cylinder. R. A valve that stops the steam from coming into the cylinder, whilst the steam within the same is condensed. S. A pipe to convey the condensing water into the cylinder. T. A cock to let in the condensing water when the cylinder is full of steam, and the valve P is shut. U. A rope fixed to the piston that slides up and down the cylinder. This rope, U, is the same that goes round the wheel D in the machine. Improved Dividing Machine. A. The tow-boat. Fig. 2. B. Chimney coming from the furnace. C, C. Two pieces of timber framed together, to carry the machine. Da, D, Db. Three wheels on one axis, to receive the ropes F, Fa, Fb. Ha, Hb. Two wheels on the same axis with the fans I, I, I, I, I, I, which move alternately in such a manner, that when the wheels Da, D, and Db, move backward or forward, they keep the fans in a direct motion. Fb. A rope going from Hb to Db, that when the wheels Da, D, and Db move forward, moves the wheel Hb forward, which brings the fans forward with it. Fa. A rope going from the wheel Ha to the wheel Da, that when the wheels Da, D, and Db move forward, the wheel Ha draws the rope F, and raises the weight G, at the same time that the wheel Hb brings the fans forward. When the weight G is so raised, while the wheels Da, D, and Db, are moving backward, the rope Fa gives way, and the power of the weight G brings the wheel Ha forward, and the fans with it, so that the fans always keep going forward, notwithstanding the wheels Da, D, and Db, move backward and forward as the piston moves up and down the cylinder. L, L. Teeth for a catch to drop on from the axis, and are so contrived that they catch in an alternate manner, to cause the fans to move always forward, for the wheel Ha, by the power of the weight G, is performing its office, while the other wheel Hb goes back in order to fetch another stroke. The weight G must contain but half the weight of the pillar of air pressing upon the piston, because the weight G is raised at the same time as the wheel Hb performs its office, so that it is in effect two machines acting alternately by the weight of one pillar of air, of such a diameter as the diameter of the cylinder is! Improved Dividing Machine. [Rep. Pat. Inv. The Society of Arts have this month awarded their Gold Isis Medal to Mr. Andrew Ross, for some extremely ingenious and useful improvements in the dividing machine. The first improvement consists in a new mode of obtaining the divisions for circular dividing engines, depending, in the main, on the same principles as have already been employed, but varying in some of the details. Mr. Ross first divides his circle into forty-eight parts, by continued bi or tri sections, or by a combination of each method. The points thus formed being carefully marked on the limb of the circle, the intervals are then subdivided in the following manner:-An arc, equal to one of the spaces to be subdivided, is procured, Improved Dividing Machine. and is divided accurately, and to the same degree of minuteness as it is intended to divide the plate of the engine. The radius of this arc is to be equal to that of the engine, and whatever errors there may be in its original divisions, are to be corrected by the following process. A second arc, having an angular value equal to the first, with a radius only one-half or one-fourth as great, is, together with the first, attached and made concentric with the plate of the engine. The divisions of the first are transferred by means of radial lines to the second, the spaces between them being diminished, of course, in proportion to the radii of the respective arcs. When the second arc has received a counterpart of the divisions of the first, it is placed on the circumference of the engine plate, and there fixed, so that the divided arc shall occupy exactly its proper angular space on the limb of the plate. The divisions of the second arc are then transferred to the first or larger one, a single interval on this latter comprising two or four on the former, according as the radius of the one is twice or four times as great as that of the other. In this manner, the errors of any particular intervals become gradually distributed among the rest, and by repeating the process a sufficient number of times are reduced to invisible quantities. The second branch of Mr. Ross's improvements, consists of the apparatus by which the divisions of the engine plate, corrected as above described, are transferred to the arc of circles of other instruments. This is usually done by means of small teeth, cut on the edge of a large horizontal wheel: these teeth being acted upon by an endless screw, about an inch in diameter. The truth of such an engine depends, first, on a perfect equality between all the teeth in the wheel; and secondly, in an equality in all parts of the spiral formed by the threads of the screw, as well as in the inclination of those threads. The obstacles to perfect success in these particulars arising from slight differences in the density of the metal, or in the sharpness of the cutter, are such as have perhaps never been overcome entirely by the most celebrated artists, however nearly they may have approached it; and the wheel and screw, when once out of the maker's hands, are no longer susceptible of any correction, whatever errors may be discovered. Mr. Ross's engine consists likewise of two parts, which act as a toothed wheel and endless screw, but so constructed that each tooth of the wheel, and every part of the screw, admit of unlimited correction and adjustment by the person using it. The teeth of the wheel are only forty-eight, and consist of brass cogs into which are tapped steel screws, the axes of which lie in the plane of the wheel, and are at their ends tangents to the circumference. These ends being ground perfectly flat form the virtual faces of the teeth, and capable of being at any time advanced or withdrawn, give, therefore, to the wheel that perfect and constant power of adjustment which has been mentioned. The same power is obtained for the endless screw, by forming it of one deep thin thread, winding round a cylinder four or five inches in diameter. Into this thread are tapped ninety screws, at equal distances, having their axes parallel with the Meteorological Observations. [Mec. Mag. plane of the cylinder: the ends of these screws forming the stops to those in the cogs of the wheel, and like them, are capable of easy and unlimited correction. Thus the circumference of the wheel is divided into 4.320 equal spaces, every one of which may afterwards be corrected if required. Meteorological Observations for December, 1831. Therm. Barometer. Wind. Dew Water State of the weather, and Moon. Days. Sun 2 rise. P.M. rise. Sun 2 P.M. point Direction. Force. fallen in rain. Inches Inches. Inches. 22° 30° 29.70 29.80 16 W. Calm. 2 16 26 30.05 30.05 11 W. Moderate. 3 30 32 29.80 29.90 15 W. Blustering. 4 14 28 30.24 30.24 7 NW.SW. Moderate. 5 28 36 30.05 30.00 25 SSW.sw. do. 6 38 45 29.80 29.75 38 SW. W. do. .52 7 32 33 30.00 30.10 27 N. NE. do. 8 29 32 30.05 29.85 32 E. SE. do. 1.80 9 38 42 29.30 29.00 33 W. Blustering. D 10 28 42 29.70 29.70 33 W.SW. Moderate. 11 30 33 29.60 29.60 20 W. Blustering. 12 18 26 29.94 30.00 8 W. do. 13 23 48 30.00 30.00 30 SW. SW. Moderate. 14 35 49 30.15 30.20 31 W. do. 15 34 50 30.24 30.24 32 W. do. 16 33 50 30.24 30.20 35 W.NW. do. 17 30 48 30.15 30.10 37 NE. SE. Calm. 18 44 56 29.99 29.90 50 SW.SW. do. .3 19 51 56 29.80 29.83 39 SSW. W. Blustering. 20 38 46 30.05 30.05 29 W. Moderate. 21 32 36 29.85 29.90 30 W. do. .21 Cloudy-flying clouds. 22 20 30 30.20 30.20 13 N. do. 23 16 33 30.30 30.20 19 NE. E. do. 24 25 44 30.00 29.90 38 NE. do. 25 36 26 29.63 29.60 26 W. do. 26 4 8 30.10 30.20 6 W. do. 27-5 8 30.30 30 30 5 W. do. 28 2 25 30.30 30.20 12 SW.SW. do. 29 22 31 30.29 30.10 19 NE. S. do. 30 24 38 29.60 29.60 33 NE. NW. do. 31 20 32 29.90 29.94 19 W. do. .81 Rain-snow. .60 Rain. Mean 26.07 34.48 29.98 29.95 24.6 3.98 Remarks. Clear-cloudy. Clear day. Cloudy-clear. Clear day. Cloudy day. Fog-rain. Cloudy day. Cloudy-rain. Flying clouds-rain. White frost: cl'r. overcası Cloudy day. Clear day. Clear day. Clear day. Clear day. Clear day. Cloudy; hazy; rain in n't. Cloudy; clear; rain in n't. .1 Flying clouds-clear. Cloudy; cl'r; snow in n't. Clear day. White frost-clear. Clear day. Clear day. Clear-cloudy. Cloudy day. Cloudy-clear. Clear-cloudy. Thermometer. 5. below zero on 27th. 30.27 Maximum height during the month, 56. on 18th & 19th. Minimum Mean do. do. 30.30 on 27th & 28th. 29.00 on 9th. 29.97 Barometer. JOURNAL OF THE FRANKLIN INSTITUTE OF THE State of Pennsylvania, DEVOTED TO THE MECHANIC ARTS, MANUFACTURES, GENERAL SCIENCE, AND THE RECORDING OF AMERICAN AND OTHER PATENTED INVENTIONS. MARCH, 1832. On the flow of Water through Tubes. TO THE EDITOR OF THE JOURNAL OF THE FRANKLIN INSTITUTE. SIR,-The following solutions to some questions proposed to me by Mr. Frederick Graff, Esq. may perhaps prove interesting to some of the readers of the Journal of the Franklin Institute, and are therefore transmitted for publication. Yours, JAMES P. ESPY. February 3d, 1832. TO FREDERICK GRAFF, ESQ. DEAR SIR, The answers to the following questions have been calculated at your request and are given below. "What quantity of water will be discharged in twenty-four hours by a tunnel five feet clear in diameter, twenty-eight miles long, descending eighteen inches in each mile-starting with a head of twelve inches above the top of the inside of the culvert?" Also, "What quantity of water will be discharged in twenty-four hours by an iron pipe thirty inches clear in diameter, of the same length, and the same head and fall?" The first, I find, will discharge 20,649,600 gallons, and the second will discharge 3,650,400 in a day. The calculation is made on the supposition that the tubes are perfectly straight and cylindrical, so as to cause no eddies, and permit no air to lodge in the upper parts of bends, which, if permitted, would materially diminish the discharge. VOL. IX. No. 3.-MARCH, 1832. 19 On Communicating Power through Air Tubes. The formula used in the calculation is derived from experiments detailed in the Edinburgh Encyclopædia-art. Hydrodynamics-and may be expressed thus: Let d be the diameter of the culvert or tube; h, the total head and fall of water, or the height of the water in the reservoir above the middle of the lower end of the pipe; 1, the length of the pipe, or tunnel, all in inches; then the velocity in inches per second with which the water will flow in the pipe, will be v. 57hd v=231+57d, which in the first case, by calculating, I find to be twenty-three inches and nine-tenths per second; and in the second case 16 inches. Now twenty-three inches and nine-tenths per second will give 57,360 yards per day, and as it is known that a cylinder of water one inch in diameter, and ten yards long, is one gallon, it will follow that each yard of the culvert, sixty inches in diameter, contains 360 gallons; but 360 multiplied by 57,360, the number of yards passing through the large tube in a day, gives 20,649,600, as before. In like manner, one yard of a thirty inch tube contains ninety gallons, and the velocity through this pipe of 16 inches per second, gives 40,560 yards per day, and this multiplied by ninety gives 3,650,40
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP, USPTO records
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, USPTO records, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847), the Journal of the Franklin Institute, Journal
- Burke's 1847 Patent Office list gives the same patent.