Drawings and documents
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 11 (1833), p. 389 · View the page
42. For a Washing Machine; Jacob Lindsey, Cannajoharrie, Montgomery county, New York, December 28.
Remarks. A box, or trough, has a curved bottom formed by framing slats into two strips, which are segments of a circle. A segmental vibrating piece, similarly constructed, is suspended by a rod attached to a pin in a frame above, which pin is the centre of the curvature of the trough and vibrating piece. The two parts do not come into contact with each other, but allow a space between them, to be occupied by the clothes to be washed. This washing machine resembles many others, the main difference being in its having small slats placed at a distance from each other, instead of the rollers usually employed.
Published accounts: specification
Specification printed in the Journal of the Franklin Institute
Journal of the Franklin Institute, new ser., vol. 11 (1833), p. 111 · View the page
Text of the specification as printed in the Journal, from OCR; not proofread.
Specification of a patent for Saving a great part of the water usually expended in the passing of boats through the locks of canals. Granted to JACOB DEWEES, M. D., Pottsville, Schuylkill county, Pennsylvania, December 28, 1832. To all whom it may concern, be it known, that I, Jacob Dewees, of the borough of Pottsville, in the county of Schuylkill, and state of Pennsylvania, have discovered a principle by the practical application of which the water which is usually expended in the passing of canal boats through the locks may be in part, or altogether, saved, and by which it is possible also actually to increase the quantity of water in the upper level by transferring thereto a portion of that in the lower level, by the mere passing of the boat from one to the other; and the principle of which discovery may be also extended so as by a special set of locks to pass empty boats without the quantity of water which is required to fill the lock for those which are loaded; and I do hereby declare that the following is a full and exact description of the manner of constructing canals and their locks in such a way as shall attain the end proposed. The canal and its locks should be constructed in the usual way, with this difference only, that the lift of the lock must be, in all cases, somewhat less than the depth of the canal, so that the water would, at the height at which it stands in the lower level, flow over and cover the bottom of the canal in the upper level. In the actual construction of canals this has sometimes happened to be the case, but as this has been merely accidental, and not adopted with a view to the application of the principle which I have discovered, it cannot be made in any way to interfere with any claim to the practical application of the principle on which my discovery is based. For the purpose of giving a clear exemplification of this principle, I shall refer to the diagram, or sectional view of a canal with its locks, which accompanies this specification, and makes a part thereof. DEWEES' Improvements in Canals If the number of cubic feet of water which is admitted through the upper gate of a lock into the chamber for the purpose of raising the water therein from the lower to the upper level, be less than the number of cubic feet which the boat afterwards displaces by entering the chamber, it, of course, must throw back, through the upper gates as it enters, that excess which it displaces above that which was let in. Now that this may happen will appear by supposing A, fig. 1, to be the gates of the upper, and B the gates of the lower level, the dotted line C, to represent the surface of the water in the lower chamber when the lower gate is open and the upper gate shut; D, the surface of the water in the upper level, or which is the same thing, that in the chamber. When the upper gate is open and the lower gate shut, let E represent the submersed hull of a boat, in the upper level which is about to enter the chamber, and to be let down into the lower level. When the wicket gate of A is opened, a quantity of water will pass into the chamber, which may be represented by the dotted lines Cand D; now let the boat, E, enter, the hull of which, whilst in the upper level, was submersed below the water line C, of the lower level, and it is plain that if the boat was to fit the whole capacity of the chamber between its sides and the gates, it would force back into the upper, a portion of the water which originally stood in the lower level, equal to that before alluded to between C and D. But as in practice there must be some play allowed to the boat in all directions, a corresponding deduction must be made from the quantity, which however does not in any way militate against the principle: should the boat do no more than displace the actual quantity admitted from the upper level, it will still save all the water which is usually lost in the lowering of the boat. The application of the above described principle may be still further extended to canals ascending and descending to and from a sunmit level, where it is important that water should be saved. For this purpose, a set of locks must be constructed for the descending boat when empty. Such a provision derives its importance from the fact, that the produce of the country, which finds its way to market along our canals, is always greater in its amount of tonnage than the articles returned by the boats, many of which will consequently pass along without loading, or nearly so. An empty boat will require in its ascent its own weight of water only, but in descending it will always require the full chamber, less its own weight. Now suppose the lift of the ordinary locks in the canal to be four feet, and that forty tons of water be required to fill it to a height with the surface of the upper level of the canal, and that the empty boat to be passed weighs ten tons, it will necessarily displace its own weight in water only, and in its descent carry along with it thirty tons. By the construction of two chambers of two feet lift each, beside the one of four feet lift, the chamber of two feet lift requiring but twenty tons of water to fill it, and the boat displacing ten tons, consequently would carry but ten tons of water with it in its descent-hence there will be DEWEES' Improvements in Canals. a gain, compared with the four feet lift, of twenty tons for the use of the canal. By constructing three chambers, with a lift of sixten inches each, in place of the two of two feet each, the saving may be extended still further. A canal, with a view to meet the foregoing principle, applied to the locks, may be excavated in such a manner as to save great expense, and very much enlarge the facilties of the trade; the side of the canal wherein is situated the lock for the passage of the heavy boat, will only require to have a channel to the greatest depth of the canal, of barely sufficient width for its passage. The side wherein are the locks for the empty boat, will only require such depth of water as will pass the empty boat, which will also be of sufficient depth to admit of the escape of the water displaced by the loaded boat, and give an increased width to the canal. Provision must be made for the passing of loaded boats at convenient and proper distances in the shoal side. There should be tow paths on each side of the canal, which will also avoid much detention. What I claim as my invention, and for which I ask a patent, is the application of the principle herein before set forth; that is to say, the construction of canals to save the excavation, in part; in which the lift of each lock is less than that of the depth of the water in the canal, for the purpose of saving water in the passing of boats through the locks; and I do further claim the extending the same principle in the construction of locks of a less lift than those used for the passing of loaded boats, which are to be constructed along side of, or near to, the ordinary lock; the combined lift of two, three or more special locks, being equal to that of the general lock, or locks. A, upper lock gates. B, lower gates. References to the Plate. Fig. 1. C, height of water in lower level. D, height of water in upper level. E, canal boat. F, chamber for loaded boats. Fig. 2. G G, chambers for empty boats. H H, towing paths. I, wall between locks. J, deep part of upper level. K, shoal part. L, turn out in shoal part. Remarks by the Patentee. JACOB DEWEES. In canals where there is a sufficient supply of water, but no more, the principles of the water saving canal may, in some parts of them, VOL. XI.-No. 2. - FEBRUARY, 1833. 15 DEWEES' Improvements in Canals. be so applied as to admit of the employment for manufacturing purposes, of that water which is lost in passing boats through locks of the ordinary construction. To derive all the advantage from the principle of which it is susceptible, there must be a uniformity in the tonnage of the boats generally traversing the canal; and, in this case, they may be passed not only without the expenditure of any water, but may actually be made to throw from one ton to half the weight of the boat, and even more, into the upper level. I am well aware that, in practice, it is necessary to allow to the boat a considerable play in the locks, for the free passage of water around it, and that the quantity which might otherwise be thrown back, will consequently be lessened; but after making due allowance for this, there may still be a gain beyond the amount of what will be required for the ascending tonnage. Great expense and loss are frequently caused by the necessity of taking the water from mills in the courses of new canals; by my plan this would be in many instances rendered unnecessary. In crossing summits also much will be gained; the quantity of water required for a canal on the present mode of constructing them prevents their being carried near to the sources of streams, the supply being insufficient; but by adopting my improvements, the distance from the stream on one side of a summit, to that on the other, will be much lessened, and what is still more important, the height to be ascended in overcoming its elevation, will be proportionately decreased. The greater the depth of the canal, and the heavier the tonnage of the boat, the greater will be the facilities offered in the passage of a boat upon my principle, as the quantity of water forced up will be more than proportionately increased. Suppose a canal to be six feet deep, and the boats used on it to be of one hundred tons burden, and suppose the water at the summit to be no more than will suffice to fill the canal, to compensate for evaporation and leakage, and to supply one half of that required by the estimated trade; it is manifest that upon the common construction no more could be carried on; but by using boats of 100 tons, they might be made to supply all the water that the whole trade would require, although this could not be effected by those of twenty, thirty, or forty tons. Canals having their courses along side of rivers, like the Potomac, Schuylkill, Lehigh, &c. where the productions of the country are greater than can be transmitted by them, may be so altered as to carry boats of heavier tonnage, and yet require less water: the only limit to the trade will then be in the number of boats which can pass in a given time. In making an estimate of the probable tonnage on a canal, it will not, on my plan, be absolutely necessary to take into view the necessity of obtaining water from extra reservoirs, to supply a scarcity. J. DEWEES. ENGLISH PATENTS.
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847), the Journal of the Franklin Institute, Journal
- Burke's 1847 Patent Office list gives the same patent.