Drawings and documents
National Archives restored drawings: drawing
Joseph Ives' Patent Drawing for a Rolling Pinion and Pinion Wheels for Clocks
National Archives, Restored Patent Drawings (Record Group 241) · Full-size scan at the National Archives · Catalog record
Show the text on the drawing Hide (138 words)
Words on the drawing as machine-read by the National Archives; not checked. Useful mainly for searching.
19 / 58. HOROLOGY, / Loo: / Clock-Trains, / $152 / Sosyph Ives. / Rolling Pinion & Pinion Wheels for blocks / CLASSIFICATION / Vol. if pg 399 / 7528- X / Patented april 12th 1833. / DIVISION. / Inside / Inside / B. / B. / Outside / Outside / Gap / and / Head to Fig.1. / bap / Head to Fig.2. / References. / a. a Prolling Pinion without pivots. / b. b Rolling Pinions with pivots. / C.C Pinion heads. d the cylinder with a shoulder / e the shaft 02 arboz of of the caps 02 headpieces. / Patent affice Decen ber % th 1841) / g. a whell with Pinions with pioots. / h a wheel with Pinions without pivot / Perspective view. / made under the direction of the Commisioner of Patents / i sideview of the head and cylinder / in conformity with act of march 1837. / It L Sumorth / ch. L. Steinhmann del. / Commisioner of Patents.
USPTO scan
The patent as scanned by the USPTO
U.S. Patent and Trademark Office · Google Patents
Show the transcription Hide (740 words)
Machine transcription (LightOnOCR) of the pages as scanned by the USPTO, most of them the handwritten copies made when the records were restored after the 1836 fire. Not checked; it can misread handwriting, so compare it with the scan.
Page 1.
7528X
No Printed Specification Available
J. Ives.
Clock Pinion Wheels.
Patented Apr. 12, 1833.
Inside
- Left: Circle labeled "c" with square center and dots …
Page 2.
75287
April 12, 1833
Joseph Aves of Bristol, Connecticut
Letters Patent
The Schedule referred to in these Letters Patent and forming part of the same, containing a description in the words of the said Joseph Aves himself of his improvement in the striking part of clocks.
To all whom these presents shall come, Joseph Aves of Bristol in the County of Hartford and State of Connecticut, Gentleman, sends Greeting. Be it known that I the said Joseph Aves, have invented, constructed, made, and applied to use a new and useful improvement in the structure of the striking part of common House Clocks, specified in the words following to wit. This improvement consists in what I term a double count wheel, in the striking part of the clock and in the application of the double count wheel to clocks constructed and made with rolling pinions. The count wheel heretofore, and now used in the construction of the striking part of clocks, which I here call the single count wheel, revolves twice in repeating regularly the twenty-four hours of the day, that is in regulating one hundred and fifty-six strokes of the clock, but the double count wheel which I have invented, revolves but once in performing the same operation. My double count wheel is made as will be seen by the accompanying model by so arranging the various steps for the striking of the hours that the different steps for twelve hours occupy but one half the circle or circumference of the wheel, whereas in the single count wheel, even in use the same steps occupy the whole circle or circumference. In the use of the double count wheel the striking of the clock is regulated and the different steps are made in the same manner as in the use of the single count wheel, but in half a revolution of my double count wheel it has all the steps and regulates the same strokes as the single count wheel does in a whole revolution. To make my double count wheel I take or make a wheel of suitable diameter
Page 3.
7528X
sions and proportions for the clock it is to be used in and divide and mark out and make the stops for twelve hours, or half a day, the same as on a single count wheel except that they extend over but one half the circle or circumference of the wheel, and from the place where the wheel regulates the striking of twelve strokes for the hour of twelve, begin again mark out and make the stops on the other half of the circle or circumference of the wheel, as on the first half of the same so that the strokes of the clock for twenty four hours of the day are the same as where the single count wheel is used, but the double count wheel revolves but once whereas the single count wheel revolves twice in performing that operation. I consider the best position in the clock for the double count wheel to be by the side of the first or barrel wheel, in the striking part of the clock, and attached to the same by dividing pins extending from one wheel to the other and of such length as to fix the count wheel at sufficient distance from the other wheel to give room for the drops wire to perform its operations.
What I claim as my invention and is the double count wheel as distinguished from the single count wheel, and the application of the double count wheel to clocks constructed with rolling pinions. The benefits of this improvement are that the clocks can be made with less expense, will run with much less weight, and are not as liable to get out of repair.
In testimony whereof that the above is a true specification of my said improvement as above described I have hereunto set my hand and seal the 15th day of March in the year of our Lord 1833.
Witnesses
Henry L. Harrington
Calvin Aultor
Joseph Shew.
(Patented 19 April 1833)
(Sealing made)
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 12 (1833), p. 242 · View the page
26. For an improvement in the Striking part of Clocks; Joseph Ives, Bristol, Hartford county, Connecticut, April 12.
Remarks. This improvement consists merely in making the count wheel to revolve once only, instead of twice, in twenty-four hours; to do this, all that is necessary is to repeat the notches for each of the twelve hours; the ordinary number occupying but one-half, instead of the whole circumference of the count wheel. We apprehend that in Italy, where it is the practice to mark from one to twenty-four upon their dial plates, their count wheels revolve but once in twenty-four hours.
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP, USPTO records
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, USPTO records, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- Burke's 1847 Patent Office list gives the same patent.