Drawings and documents
National Archives restored drawings: drawing
D. G. Colburn's Patent Drawing for a Type of Firearm Mechanism
National Archives, Restored Patent Drawings (Record Group 241) · Full-size scan at the National Archives · Catalog record
Show the text on the drawing Hide (410 words)
Words on the drawing as machine-read by the National Archives; not checked. Useful mainly for searching.
42. FIRE-ARMS: / Parenteriumsy Patenter Junisg / Revolvers. / ollar. d- Breakoff. Itrap runn / An p the magazine / e. h- Main spring on the backpart of / 1833 / CLASSIFICATION / nanging mainspring to the lever. - Leve / in the trigger plate, pointing forward to the may / 7620-x / ch, m, that turns the magazine and cocks the lock. n- The cock. Link which connects the cock and the lever. p- nt gger / DIVISION. / cocking trigger. r Retracting spring of the front trigger. S- Barrel of the gun. t- Hide to shove forward, and backward and иплоск and / the magazine by the cocking trigger or by the finger. V- Forward spring of the slide. V- bross pin through the end of the arber. w- Pins in the / igazine by which the lever turns it. x- Holes into which the slide shoots to lock the magazine. y The priming magazine. Z- batch / on the cocking trigger to draw the slide back by the spring end of the slide attaching or hooking to it. /- Pick orpout of the cock / to strike a percussion pill and discharge the gun. 2-The sear part of the front trigger. / Top viewwith the cock down. / Front view / of Breakoff. / Rear view of / Cylinder or / Magazine / Top view of Lever / Front end of / Lever-k. / Ow / Im / Ox / Crees / Left side view with the cock down / Right side view with the / elevated. / By / bity of Philadelphia SS: / Longitudinal section with the cock down. / On this the tenth day of February AD One thou / sand eight hundred and fifty three (1853) before me Joel book one of / the aldermen of the City aforesaid and ex officio a Justice of the Peace person- / ally appeared David G. bolburn, who has subscribed his name hereto, / and made oath according to law, that on the Twenty minth day of / June AD. One thousand eight hundred and thirty three (1833 ) Letters / Paten of the United States weregranted to him for a new and usefu / improvement in a gun, and that the accompanying drawn / are a true deliniation of his invention described in the / specification of his said patent. and deponent further sa / that his present place of residence is Hoosick Falls, Itate of / make exact copy on think paper / New york. / summ and subsculed to hyon me / David G, Collurn / thaded to / this Tenth day of Fibruary 1853 / Almo July 15/33 / Joel 6mk / Aldern a Exoppeces / a Sustia of the Peace
USPTO scan
The patent as scanned by the USPTO
U.S. Patent and Trademark Office · Google Patents
Show the transcription Hide (751 words)
Machine transcription (LightOnOCR) of the pages as scanned by the USPTO, most of them the handwritten copies made when the records were restored after the 1836 fire. Not checked; it can misread handwriting, so compare it with the scan.
Page 1.
7620X
D. G. COLBURN.
Revolver.
2 Sheets—Sheet 1.
Patented June 29, 1883.
Top view with the cock down.
Left side view with the cock down.
Longitudinal section with the cock down.
Inventor.
David G. Colburn
Page 2.
7620X
D. G. COLBURN.
Revolver.
2 Sheets—Sheet 2.
Patented June 29, 1883.
Right side view with the cock elevated.
Front end of lever.
Top view of lever.
Rear view of Cylinder.
Front view of Breakoff.
Inventor.
David G. Colburn
Page 3.
7620X
UNITED STATES PATENT OFFICE.
DAVID G. COLBURN, OF CANTON, VAN BUREN, NEW YORK.
IMPROVEMENT IN GUNS.
Specification forming part of Letters Patent dated June 29, 1833.
To all whom it may concern:
Be it known that I, DAVID G. COLBURN, of the village of Canton, town of Van Buren, county of Onondaga, and State of New York, have invented a new and useful Improvement in Guns; and I do hereby declare that the following is a full and exact description of the construction and operation of the said machine as invented by me.
The improvement is made to shoot from three to twelve times at once, loading by means of a cylinder or magazine, which turns on an arbor passing from the collar through to the break-off, receiving the cross-pin through it to keep it firm, a strap running from the break-off to the collar in front of the magazine, and fastened with two screws, a nut on the arbor to screw up the magazine to the collar, the trigger-plate to be fastened on the bottom of the break-off on the front, and on the back on the stock of the gun, the mainspring on the back part of the trigger-plate pointing forward and hanging to the lever with a link, the lever hung in a post in the trigger-plate pointing forward to the magazine, with a spring-catch that points up when cocked and turns the magazine and cocks the lock and primes the same time by a small magazine on the top of the break-off. The cock hangs in the break-off with a link down to the lever. The sear is the front trigger, hanging in the trigger-plate and catching under the forward part of the lever. The cocking-trigger is behind the front trigger under the lever. To cock the gun by pulling the back trigger back and turning the magazine and priming at the same time, a slide under the trigger-plate to shove forward or back by a spring attached to the trigger, or by the finger when the magazine has rolled far enough, brings a charge before the barrel, which is attached to the collar, so that, pulling the back trigger, it will, after the magazine is charged, cock the lock, roll the magazine to its place, and prime at the same time, ready for a discharge; and it is to be used for rifles, pistols, or fowling-pieces, and is to be used with one or two barrels. With one barrel used the above-described lock, and when two barrels are used the one of the barrels must be attached to the collar beside the other, with the addition of a side lock made to go on the side of the gun, the plate from two to four inches long and from one-half to one and a half wide, the cock to be made to go through the plate, with a peak from one-half to one and a half of an inch long, the mainspring to hang on the back part of the plate, pointing forward and hanging to the cock, with a link, with a post in the back part of the plate, and a slide passing through and shoving the peak of the cock forward to cock it with the back trigger, or to cock by the forward trigger coming against the peak of the cock; and in cocking with the forward trigger the sear projects back to the back parts of the plate and falls off with the back trigger. The lock is to be used on rifles, fowling-pieces, and pistols, and the first-described to be used with or without the last.
What I claim as my own invention is—
All of the locks, and cocking and turning the magazine and priming at the same time by pulling the trigger.
DAVID G. COLBURN.
Witnesses:
WILL HEBB,
NORMAN DURKE.
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 12 (1833), p. 408 · View the page
40. For an improvement in the Gun; David G. Colburn, Canton, Onondagua county, New York, June 29.
Remarks. This is to be a magazine gun, to fire from three to twelve times after being once loaded. There is to be a cylindrical magazine revolving on an arbor, and containing the required number of charges. The lock is to be so constructed that it will turn the magazine, and prime itself at the same time by pulling the trigger. The description of the apparatus is extremely obscure, and were we to contrive to pick out the parts which are represented in the drawing, so as to understand their uses, we should be unable to communicate the knowledge so acquired; and were we able to do so, the information afforded would, we apprehed, be of very little value, because we do not think the thing itself will ever come into use, nor, if brought into use, do we believe that it would much outlive an ephemeron. The claim is to all the parts employed in the lock for cocking, priming, and turning the magazine.
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP, USPTO records
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, USPTO records, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- Burke's 1847 Patent Office list gives the same patent.