Drawings and documents
USPTO scan
The patent as scanned by the USPTO
U.S. Patent and Trademark Office · Google Patents
Show the transcription Hide (474 words)
Machine transcription (LightOnOCR) of the pages as scanned by the USPTO, most of them the handwritten copies made when the records were restored after the 1836 fire. Not checked; it can misread handwriting, so compare it with the scan.
Page 1.
7837X
No Printed Specification Available
J. Shaw,
Shaw Cutter.
Patented Nov. 19, 1833.

Page 2.
11/19/1833 7837x
Nov. 19, 1833
John Shaw's Steam Cutter
Letters Patent
The Sealer refers to in these Letters Patent and making part of the same containing a description in the words of the said John Shaw himself of his improvement in the Steam Cutter.
To all to whom these Presents shall come:
Be it known that I John Shaw of the City & County of Philadelphia & State of Pennsylvania have invented a new and useful improvement in the Steam Cutter & that the following is a full & exact description of the construction & operation of the said Machine as invented & in practice by me, viz:
A. The boy, this made in the usual form the lower end being in an upright higher than the front one being supported by posts & a girl, having a piece of board fastened on the top of said boy, near the front end, also a strip of steel secured on the inside of said boy near the front end for the knife to pass close to it. B. The posts, these framed together with girls, on one the lower ones & one near the middle, for the front of said boy to rest on, being secured on each side of said boy & projecting out beyond said end, having each groove for the tongues on the gate to fit in. C. The knife, this is made of steel being curved on the edges & sharp on the concave edge, having holes near each end to screw it on across the back side of the gate at an angle of about forty degrees, & so placed that when the gate works up & down, the said sharp edge will pass close by the edge of said steel. D. The gate, this is an alloy frame having on the outside of each largest part a tongue to fit in the groove in said posts & a handle screwed in the front end of said gate to work it up & down. Also said gate has a board hinged in & secured on the outside, on the lower part of said gate that can be moved out to gauge the length of the steam to bear, not coming quite up to the said knife. Also the frame from the lower end of said gate to be taken off in the back side. The advantage of this improvement on the sharpness of the Machine, the case, especially respecting that the work is
John Shaw
Filed Nov. 19, 1833
No. 7837
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 13 (1834), p. 323 · View the page
53. For a Straw Cutter; John Shaw, city of Philadelphia, November 19.
Remarks. The advantages of this straw cutter are said to consist in its cheapness, and the ease and rapidity with which the work may be done by it. With respect to its novelty, we have no information, but think that though there certainly is not much of this ingredient in it, enough might be discovered upon which to found a claim, although not a very broad one. There is to be a trough, of the common construction, to hold the straw; but there is no provision made for advancing it. There are uprights at the front end of the trough, which serve as guides to a frame to be worked up and down by a treadle. A knife crosses this frame obliquely, and a board is fastened upon the frame, as much in advance of the knife as the length of the straw to be cut, and against this its ends are to rest. Such, we believe, is a true description, but in giving it we have been compelled to guess a little, as the explanation given is not a very clear one. If there is any novelty in the affair it is in the manner of placing the board to govern the length of the straw; but in this there is a defect, as in descending it must necessarily rub upon the ends of it, and thus create friction.
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP, USPTO records
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, USPTO records, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- Burke's 1847 Patent Office list gives the same patent.