Drawings and documents
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 15 (1835), p. 393 · View the page
12. For a Thrashing Machine; Stacy West, Hartford county, Maryland, November 11.
Remarks. (See the specification.)
Published accounts: specification
Specification printed in the Journal of the Franklin Institute
Journal of the Franklin Institute, new ser., vol. 15 (1835), p. 413 · View the page
Text of the specification as printed in the Journal, from OCR; not proofread.
Specification of a Patent for a Machine for thrashing and rubbing out Wheat. Granted to STACY WEST, of the county of Hartford, in the State of Maryland, November 11th, 1835. To all whom it may concern, be it known, that I, Stacy West, of the county of Hartford, and State of Maryland, have invented a new and useful machine for the purpose of thrashing, or rubbing out, wheat, rye, and other small grain; and I do hereby declare that the following is a full and exact description thereof. I construct a suitable frame, of strength sufficient to bear the stress which is to be put upon it. This may consist of four corner posts, into which are strongly framed the requisite side and end pieces. Upon this I mount four or more cylinders, by means of which the thrashing, or rubbing out, is to be effected. I in general use four cylinders only, and to this number I shall confine my description, although six, or more, may be used upon the same principle, but, I apprehend, without any adequate advantage. For a machine of ordinary size, these cylinders may be each thirty inches long, and seven or eight inches in diameter. They may be made of cast iron, in one entire piece, but I usually make them of wood, and cover them with ribs of iron extending from end to end, so as to form the surface into flutes and ridges. The ridges may be about three-fourths of an inch apart, and the flutes by which they are separated about the same in depth. The edges of the ridges are to be notched, or serrated, forming teeth upon them their whole length. The cylinders are placed horizontally, and turn upon gudgeons in suitable boxes, or bearings; a line uniting their gudgeons would form a quadrangle, there being two upper and two lower cylinders, forming two pairs, one lower and one upper being denominated a pair. I WEST'S Thrashing Machine. call that the front of the machine where the straw is delivered, and that the back where the feeding is effected. The two front cylinders mash into each other, by means of their ridges and flutes, and would turn each other like the teeth of a wheel; but as they are not to touch, they are not allowed to do this, they being kept in their relative situations by means of the wheels on their gudgeons by which they are geared together. The two front rollers are placed at the distance of about half an inch from the two back ones; they run with very different velocities, and must not, therefore, interfere with each other. In a machine which I have constructed, these velocities are as six to one, which I think a good proportion; but this is a point which admits of considerable latitude. I do not, in general, place the pairs of cylinders directly one over the other, but bring the lower back cylinder so far forward, that its centre is nearly under the space between the two upper ones, advancing the lower front cylinder in the same manner; the intention of this is to bring the lower back, and the upper front, cylinders nearly, but not quite, into contact with each other, as this materially aids in the operation of thrashing, much of the grain being rubbed out between these diagonal cylinders, before it passes between the two front ones, where it is completed. The feeding is effected between the two back cylinders by means of a feeding table, or feeding apron, in the ordinary way. The manner of gearing the cylinders, for the relative velocities above spoken of, is as follows. Upon one of the gudgeons of the upper back cylinder there is a cog wheel, of such size that it mashes into a pinion of one-sixth of its diameter, on the gudgeon of the lower front cylinder. At the other end each of the pairs of cylinders are geared together by wheels, or pinions, of equal size. Motion may be given to them by a whirl and band, or otherwise. The bearings of the upper gudgeons are made capable of being raised by means of wedges, or screws, to regulate the distances of the pairs of cylinders to the kind of grain to be got out. To admit of the receding of the cylinders from each other, in case of the introduction of any hard substance between them, I place on each side of the frame, and resting upon the boxes of the upper cylinders, an elastic bar, or strip, of wood, reaching the whole length of the frame, and confined at its two ends. These pieces may be about two and a half inches square, more or less, according to the nature of the wood employed. To the front cylinders I usually give a velocity of from three to six hundred revolutions per minute; the effect, however, does not depend upon the velocity, as the grain is not beaten, but rubbed out, the back cylinders holding it, whilst this is effected by the more rapid motion of the front cylinders. I do not claim any of the parts of this machine taken separately, the cylinders, wheels, and other parts, being such as have been before used for various purposes; but what I do claim is the employment of two or more pairs of cylinders, moving with different velocities, constructed in the manner, and applied to the purpose, hereinbefore set forth. Not intending, however, to limit myself to the precise mode of construction and gearing which I have designated, but to vary the same in any manner in which a similar effect is produced by the application of the same general principle. STACY WEST. TRANSLATIONS FROM FOREIGN JOURNALS. REPORT To the Board of Directors of Bridges, Public Roads, and Mines, upon the Use of Heated Air in the Iron Works of Scotland and England. By M. DUFRENOY, Engineer of Mines. Paris, 1834. [Translated for this Journal, by S. V. Merrick.] Continued from p. 357. REMARKS UPON THE NATURE OF THE COAL EMPLOYED IN THE FURNACES USING CRUDE COAL. It results from the preceding description, that certain coals, those of Wales, are employed in their natural state, for the fusion of iron ore in the smelting furnaces in which combustion is sustained by cold air. That a great number of others the coals of Glasgow, for example -are also susceptible of being used in the crude state, when the hot blast is employed; but that, for some varieties, the transformation into coke appears still to be indispensable, whatever be the plan on which the iron is made. To appreciate the causes which produce these remarkable differences in the properties of these coals, I have collected samples of most of those employed in the works spoken of in this report, which M. Berthier has analyzed in the laboratory of the School of Mines, and the results of which he has communicated. Coal employed in the crude state in the Welsh Iron Works. Cold Blast. Dowlais. Cyfartha. Pen-y-danau. Carbon, 0.795 0.784 0.768 Ashes, 0.030 0.028 0.032 Volatile matters, 0.175 0.188 0.200 1.000 1.000 1.000 The coal of Dowlais is lamellar, separating across the layers in smooth and brilliant plates. This coal is composed of two distinct parts, one brilliant, dividing into small cubic fragments; the other, completely hard, fracture conchoidal, is nearly analogous to the Cannel coal. These two varieties do not blend, but form in each strata small beds of greater or less thickness; the brilliant part greatly predominates. The Dowlais does not soil the fingers; it swells very little in coking, and does not cake; the ashes are perfectly white. The coal of Cyfartha is rather slaty, or lamellar, but is composed, as the preceding, of the union of the brilliant and compact black parts, intimately mixed, like the quartz and feldspar crystals in granite. These two varieties of coal act very differently; that having a brilliant fracture swells and cakes sufficiently, whilst the dull kind is dry, and does not change by exposure to the fire. It is probably this mixture that gives to the coal employed at the Cyfartha works, the property of resisting more than any other the action of the blast, and the different movements which take place in the furnace; its friability is also due to this circumstance; but the bitumen, which exists in sufficient abundance in the shining coal, cements the different parts of this coal, and gives it a great solidity after having been exposed to the fire. The coal of Pen-y-danau has the same properties as the preceding, except that the mixture of the two kinds is less intimate. These three coals, belonging to the coal basin of Wales, are very dry, and owe this property to the excess of carbon which they contain; they are analogous to the coal of Rolduc. Coals employed in a Crude State, in Furnaces worked with Heated Carbon, Ashes, Volatile matters, Gas, Tar, Air. Staff'd Environs of Glasgow. shire. Derbyshire. Clyde. Calder Monk. Tipton Butter Codnor near land. Wed'y ly Park. 0.644 0.510 0.562 0.675 0.570 0.515 0.046 0.040 0.014 0.025 0.030 0.030 Water, 0.005 0.039 0.115 0.139 0.081 0.094 0.166 0.330 0.215 { 0.300 0.400 0.455 1.000 1.000 1.000 1.000 1.000 1.000 The coal of the environs of Glasgow, employed in the Clyde, the Calder, and the Monkland works, present characters sufficiently marked, and of a composition very analogous, as seen by the preceding table. This coal is usually dull, a little compact, hard, and does not crumble between the fingers; it presents, in its transverse fracture, a series of small lines, which gives a slaty appearance, though it does not, in reality, possess this quality. It is very well stratified, and the lumps cleave in flat fragments, of greater or less thickness; the surfaces of separation are almost always marked by black carbonaceous matter, which soils the fingers, and resembles charcoal in its fibrous appearance, and dull colour. This coal is often traversed by extremely thin fillets of carbonate of lime, the direction of which is perpendicular to the layers, and sometimes pyrites is found. The pieces of Glasgow coal submitted to analysis, softened but slightly; they cement together without change of form. The coal of Tipton, which supplies the works of Lloyd & Forster, near Wednesbury, is slaty; it is composed of small beds, a few lines in thickness, separated almost always by an extremely thin bed of black carbonaceous matter, like charcoal. This substance is so abundant, that a piece of coal is rarely found at Tipton, more than four inches thick, which does not present one or two layers of this friable material. This coal, shining in its fracture, divides into small pseudoregular fragments; it is slightly tenacious, and swells but little in coking. The coals in the environs of Derby are divided into two principal qualities, designated under the names of Cherry coal, and Soft coal; the first, which is the harder, resists the action of the fire better than the second. The furnaces of Butterly, which use heated air, consume the Cherry coal exclusively; this coal is slaty, and presents lines of dull black, which gives it a strong resemblance to the coals of Scotland. The soft coals, employed principally for steam engines, and puddling furnaces, are used also, at Codnor Park, for the roasting of ores. This coal is shining, slaty, and separates in pieces by very light pressure; it contains some thin portions of black and friable carbonaceous matter, already alluded to. Notwithstanding the considerable loss which these two coals sustain by coking, they scarcely change their form; they swell and cake slightly, and their ashes are perfectly white. Coals that appear to require transformation into Coke, when employed even in Furnaces worked with Heated Air. Birtly Works, near Tyne Works, Newcastle. Northumberland. Apdale Works, near Newcastle, Staffordshire. Carbon, 0.605 0.675 0.624 Ashes, 0.040 0.025 0.035 Volatile matters, 0.355 0.300 0.341 1.000 1.000 1.000 The coal consumed at the Birtly and the Tyne Iron Works, comes from the mines in the environs of Newcastle-upon-Tyne; it is shining, and splintery; it does not soil the fingers, nor does it crush by a light pressure. This coal is, in general, very pure, containing no veins of carbonate of lime, or pyrites; it is very adhesive, and swells much by the action VOL. XV. No. 6. - JUNE, 1835. 53 of heat, so that the value of the coke exceeds that of the coal employed. I am assured at the Tyne works, that they have tried in vain to work Newcastle coal in the crude state. The coal of the Apdale Works is lamellar, shining and splintering in the direction of the strata; it divides into small quadrangular fragments; in the cross fracture, it presents large bands, perfectly smooth, and very brilliant. This is owing to the super position of small layers, of which the nature is a little different; this coal is very adhesive, swells in the fire, and gives a light, silvery, but very solid, coke. If we compare the composition of the different coals that we have examined, we perceive1st. That the coals employed in a crude state, in the furnaces worked with cold air, are dry, very carbonaceous, and, in fact, true anthracites. 2d. The coals, as those of Scotland and Derbyshire, which, though bituminous, serve, in a crude state, for the fusion of iron ore in the smelting furnaces worked with heated air, are, however, still dry coals. 3d. Finally, the fat, bituminous, adhesive coals, which change their volume, and swell by the action of fire, appear still to require a transformation into coke, to give advantageous results in the smelting of iron ore. Quality of the Pig Iron and Bar Iron obtained in the Works using the Heated Air Blast. The iron for castings made in Scotland, bears a less commercial value than that of Staffordshire. The first were quoted in the Liverpool market, in the month of July (1833) last, at 4l. 15s, sterling per ton, whilst the Staffordshire iron sold, at the same time, for 6l. The difference between the price of these kinds, together with the prejudice generally entertained that the hot blast is unfit for the manufacture of iron, led some to doubt the advantages to be derived from the new method. The numerous observations I have made, tend, on the contrary, to prove that, for cast iron, at least, the products of the furnace working with heated air, are superior to those of the cold blast. The less value of the Scotch iron is no evidence against this opinion. In fact, the Staffordshire iron has always been regarded as the most suitable for castings, and has always borne a higher price than that from most of the other parts of Great Britain; perhaps, also, the great difference in price between the Scotch and Staffordshire irons, may be accounted for by commercial circumstances, for the Scotch now make iron much cheaper than others, and the production being increased almost one-third, by the employment of heated air alone, the iron masters have thought it to their interest to reduce the price of their iron, which they are enabled to do without loss. It would be desirable if this important question could be decided by direct experiments; but for want of such, I will state the uses of these different products in the arts-uses which are, perhaps, as conclusive as experiments. In the works near Glasgow, they make iron only for the foundry; I have seen the iron which they produce employed for the manufacture of castings, which require great strength and softness, to wit: steam engine cylinders, boilers, gas pipes, mill gearing, &c. At Birtly, near Newcastle, and at Butterly, near Derby, I have also seen steam engine cylinders, pipes for water pumps, and fastenings for iron bridges. I should state that the furnace of Torteron, at the Fourchambault works, in the Nievre, produces, since the use of this plan, gray iron, which competes in the market with that from England. The iron manufactured from hot blast pigs, is also of very good quality. At Codnor Park, near Derby, this iron is employed in the construction of different parts of the steam engine, of chains for suspension bridges, and of straps and cross-bars in iron bridges, The iron produced at the Tyne works is wrought into sheets, for steam boilers, gasometers, &c. At Wednesbury, the iron is also of good quality, and serves for purposes which require great strength. These different examples prove that, by means of the hot blast plan, as well as by the old mode, superior metal can be made for foundry purposes, and which is well adapted for conversion into wrought iron; but it must not be thought that, by means of this plan, the faults which result from the nature of the ore, or coal, can be corrected. Probable Causes of the Increase of Heat, due to the Use of Heated Air. I have remarked several times, in the course of this report, that the temperature of the furnaces worked with heated air, appears to be higher than in those where combustion is sustained by the use of cold air; all the indications which are usually considered as guides for the working of the furnace, unite in proving this assertion. The scoria does not attach itself above the tuyeres; the colour of the fire, in this part of the furnace, is so white as to be injurious to the eyes; the scorias, which are very liquid, flow with facility; the metal being hotter, can be cast directly into the most delicate objects. The quantity of ore in each charge is augmented in a great proportion, whilst the quantity of flux is decreased. This diminution in the proportion of melting is, of itself, the strongest proof of the increased temperature of the furnace; it indicates to us that the earthy matters find sufficient heat to fuse with a small addition of flux, Probably it is to this excess of temperature that we should attribute the faculty of employing certain coals in a crude state, the transformation of which into coke appeared indispensable, at a less elevation of temperature. In spite of these certain proofs of the increased temperature by the introduction of hot air into the furnaces, we cannot demonstrate its existence in a positive manner; but it appears to me that, to a certain point, a reason for this phenomenon may be given, by comparing that which passes in the furnace, by the constant introduction of air, to that which takes place by the mixture of two liquors of different temperatures, which we know will produce a mean temperature. The comparisons which I establish appear to me to be just, though the furnaces are in circumstances very different from the liquids having a given temperature, because the heat is reproduced without intermixture, by the combination of carbon and oxygen. By admitting this cause of the augmentation of heat, it might be supposed to be very slight; on account of the great difference which exists between the temperature of the furnace, and that of the air which sustains the combustion; a difference that we have no accurate means of appreciating. I will show hereafter that this cause is not so feeble as might at first be supposed. There is, I believe, another much more powerful cause, which it is impossible to estimate; it results from combinations, which could not be produced at the ordinary temperature of the furnace, and which are developed by the augmentation of heat due to the substitution of hot for cold air. We see constantly, in our laboratories, examples of this phenomenon; substances which are acted upon slowly, and with much difficulty, by acids, at the temperature of the atmosphere, dissolve with facility when the liquor is slightly heated, and the combination formed often becomes itself a powerful source of heat. The operation of the smelting furnaces presents to us, perhaps, similar circumstances. The bitumen, and certain gases, which cannot burn at the temperat
About this record
- Patentee
- the Journal of the Franklin Institute, Journal
- Date
- the Name and Date index of patents, Jim Shaw's X-patent list
- Invention
- the Name and Date index of patents
- Listed in
- the Name and Date index of patents, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847), the Journal of the Franklin Institute, Journal
- The patentee's full name comes from the Franklin Institute's journal.
- The residence comes from the Franklin Institute's journal.
- Burke's 1847 Patent Office list gives the same patent.