Drawings and documents
National Archives restored drawings: drawing
Samuel Clime's Patent Drawing for a Combined Plough
National Archives, Restored Patent Drawings (Record Group 241) · Full-size scan at the National Archives · Catalog record
Show the text on the drawing Hide (178 words)
Words on the drawing as machine-read by the National Archives; not checked. Useful mainly for searching.
Intered / 97. PLOWS. / [43] Cultivators. / to / SAMUEL CLIME'S / CLASSLITICATION / 8965y / OMBINED PLOUGH e / DIVISION: / Patented 17. July.1835. / R E F EX R E N C E S / C.D. The Beam , 5 feet 2 inches. / F.E. the transverse beam, 4 fect 9 inches. / A. B. afect. o.P. 10 incher. C.G. 5inches. / G. e A perpendicular, raised on the misse / fA.B. equal 28 inches, which is divid / -ed into 4 equal parts and perpendiculars, rais / ed to the transverse beam, for placing the / ploughs. Angle at A.60. / 8.8. supports the handles H.H. / P.P.P.P.P. the flought. / Scale one inch to the foot. / of / G C d / to / The principal Improvement / beam C.D. 3 fact long. / A.B. 6512inches. A.G. 26 inches. / o.P. foot C.B. 5 1/2 inches. / B.G. 20 inches. / Angle atA.52 rgrees. / 8.g. supports the handles H. H. / P.P. Phoughts. / o, / D at C. a screw, and wedge, for / (8 / the purpose of raising, or defores / my the beam. B.a 4 inches. / C.a. 3 1/2 .
USPTO scan
The patent as scanned by the USPTO
U.S. Patent and Trademark Office · Google Patents
Show the transcription Hide (802 words)
Machine transcription (LightOnOCR) of the pages as scanned by the USPTO, most of them the handwritten copies made when the records were restored after the 1836 fire. Not checked; it can misread handwriting, so compare it with the scan.
Page 1.
8965X
S. CLIME.
Cultivator.
Patented July 17, 1835.
Fig. 1.
Fig. 2.
A.M. PHOTO-LITHO. CO. N.Y. (OSBORNE'S PROCESS.)
Page 2.
8465X July 14, 1835 297
Samuel Cline
Letters. Patent.
The Whole referred to in these Letters Patent and making part of the same, containing a description in the words of the said Samuel Cline himself of his improvement in the Plough.
Specification or description of Samuel Cline’s newly invented and improved combined Plough “being a machine for ploughing in light free soil, for ploughing in grain, deeping Sodian Corn and all other light soils of a similar kind. The principle of combination on which the due construction of this machine depends is to place the line of draft or beam so that the ox planes to be overcome may bear equally on both sides of that line. To effect this the beam to which Horses are attached must be inserted five inches to the right of the middle of the hind beam, and bear to the left just so much that a perpendicular raised on the centre of said hind beam will touch the end of the main beam. The transverse beam crosses the beam of the Plough at an angle of sixty degrees. The proportion used and found convenient are about ten inches in length and eight in breadth, and the turn of the mould board should be very little beyond a perpendicular from the hinder corner of the share. The Plough consists simply of Mould board, land side, and whetle or standard. The mould board is drawn and flattened out at the lower edge so as to supply the place of a share. These should be made of iron and steel as the hammered & rolled, except at the pleasure of the maker and fastened into the transverse beam by the standard with a shoulder on the under side of the beam fitted to an iron collar and screw and nut or strong wedge on top of the beam. The standards are made from two inches in height, and the draft or depth of the Plough is regulated by a screw and wedge at the insertion of the main beam, and the hinder beam. The whole length of the beam being five feet two inches. The machine is found to work well with Ploughs of eight inches in breadth placed at the distance of fourteen inches from each other, thus cutting about ten inches each and using five ploughs. Two horses are able to work the combined Plough quite easily and to pass over as much land in a day as three teams of two horses each with a common single Plough. Figure No 2. is the principal improvement in the “combined Plough” which is calculated for two or three Ploughs only. The main beam
Page 3.
being inserted in a perpendicular line to the hinder beam. The moulds are formed in the same shape and of the same material as those in Figure No 1, but with the addition of a cutter made of steel and secured to the land side and extending two or three inches beyond the mould so as to supply the place of a cutter. This improvement to the machine is used for ploughing a field on any other ground in handsome order. To construct a combined Plough Figure No 1. draw the line A.B. equal 2 feet. at A draw the transverse beam A.C. making the angle B.A.C. equal 60°, and the beam C.F. equal 4 feet 9 inches, bisect A.B. in G, and erect a perpendicular Gc. and where this crosses the transverse beam, is the place of the centre place, g.h. divide said beam in equal parts at the points o.o. for the insertion of the other Ploughs at 5 inches to the right of the centre G, insert the beam C.D. 4 inches wide and 5 feet 2 inches long, let it bear to the left so that the end A.D. will touch the line Gc. At C. insert a screw and wedge for raising and depressing the beam C.D. so as to plough any required depth. To construct a Combined Plough Figure No 2. draw the baseline A.B. equal 15 1/2 inches, B.G. equal 21 inches and the transverse beam A.F. 26 inches making the angle B.A.G. = 60° at 5 1/2 inches from B insert the beam C.D. 3 feet in length, make A.a. 3 1/2 inches and C.c. 17 1/2 inches also B.A. 4 inches. At C. insert the screw and wedge as in No 1.
End Witnesses Samuel Clime
N.H. C.S. McDowell Hugh A. Henry
(Drawing) J. Edwards
Published accounts: journal notice
Notice in the monthly list of patents
Journal of the Franklin Institute, new ser., vol. 16 (1835), p. 215 · View the page
421. Plough. Samuel Clime, Plumsted, Bucks county, Pa.
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 17 (1836), p. 127 · View the page
33. For a Plough; Samuel Cline, Plumstead, Bucks county, Pennsylvania, July 17.
Remarks. The improvement in this plough is said to consist in "placing the line of draught, or beam, so that the resistance to be overcome may bear equally on both sides of that line." The mode of forming the plough so that the beam shall stand in the way mentioned, is particularly described, but this we do not think it necessary to detail.
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP, USPTO records
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, USPTO records, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- Burke's 1847 Patent Office list gives the same patent.