Drawings and documents
Published accounts: specification
Specification printed in the Journal of the Franklin Institute
Journal of the Franklin Institute, new ser., vol. 12 (1833), p. 417 · View the page
Text of the specification as printed in the Journal, from OCR; not proofread.
Specification of a patent for an improvement in the Construction of Roads, whereby some of the advantages derived from rail-roads are extended to common carriages of burthen or pleasure. Granted to JOHN S. WILLIAMS, Cincinnati, Hamilton county, Ohio, June 29, 1833. I lay two continuous lines of timber, or other suitable material, lengthwise, on said road, at such a distance apart as to form tracks for the wheels of such vehicles as are in general use upon the road so improved. I furrow, gutter, or groove, one of these tracks, in order to receive and guide the wheel, or wheels, on one side of the carriages travelling thereon. Those grooves, or gutters, may be made in the timber, or other material, before it is laid upon the road, or afterwards, either by hand or by machinery propelled by any suitable motive power, or they may be formed by attaching cheeks, or sides, to a plain surface. The other track ought to be laid on a level with the bottom of the furrow, or gutter, above mentioned. Its face I make plain, and it ought to be of such a width as to allow for the variation of span sometimes given to the wheels of different kinds of carriages in some places, so that while the wheels of one side of the vehicles shall remain within the groove of one track, the other wheel shall remain on the face of VOL. XII. No. 6. - DECEMBER, 1833. 53 ESPY'S Improved Chimney Cap. the other track, notwithstanding the different spans to which they may be constructed. These tracks may be bedded, or laid, in, or upon, stone, gravel, clay, or any material of which the surface of the road is formed, and the piece of which they are constructed, may be connected by dowels, or clamps, or laid upon transverse blocks, or cross pieces, which may, or may not, extend from one to the other. Scrapers may be attached to some of the carriages passing on said tracks for the purpose of cleansing them of stones, earth, or other matter, which might tend to obstruct the wheels, or injure the tracks. Where there is much travelling upon a road so improved, I lay two sets, or four continuous lines, of tracks, one set for the going, and one for the returning carriages. This will be found most convenient; although to turn out of the tracks, when carriages meet, will not be attended with difficulty, as one side only of the turning out carriage would have to be raised over a small obstacle. I am aware that some of the advantages of such a track road may be gained by laying timber, &c. as above, and by furrowing, guttering, or rebating, both tracks to guide the wheels, but I prefer to gutter, or groove, one only. What I claim as my invention or improvement, is the laying of tracks of wood, or other suitable material, one of which shall be furrowed, grooved, or guttered, in the manner, and for the purpose, hereinbefore set forth. JOHN S. WILLIAMS.
About this record
- Patentee
- DATAMP
- Date
- DATAMP
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, Jim Shaw's X-patent list, Burke's List of Patents (1847), the Journal of the Franklin Institute, Journal
- The sources give different dates; the date shown is the one most of them agree on.
- Burke's 1847 Patent Office list gives the same patent.