Drawings and documents
National Archives restored drawings: drawing
James Stimpson's Patent Drawing for an Improvement in the Mode of Forming and Using Cast or Wrought Iron Rails for Railroads
National Archives, Restored Patent Drawings (Record Group 241) · Full-size scan at the National Archives · Catalog record
Show the text on the drawing Hide (152 words)
Words on the drawing as machine-read by the National Archives; not checked. Useful mainly for searching.
104. RAILWAYS. / The "Way" / [220] Rails. / CLASSIFICATION / JAMES STIMPSON'S IMPROVEMENT IN THE MODE OF FORMING / 6715-7 / AND USING CAST OR WROUGHT IRON RAILS FOR RAIL-ROADS. / DIVISION. / Patented 23 Aug. 1831 / AA A cross section of cast orwrought iron rails, shewing the wheels running on their Ireads. / p.339.) / B.B. A cross section of cast orwrought iron rails, shewing the whee Is running on their Flanches within the grooves. / C. / A longitadinal viewof the rails AA. / E. Avertical section of C, the cast-iron plate for crossing gutters. / D. / A longitudinal view of the rails B.B. / F. An end vertical section of G. / G. A perspective view of E andF. when turning a curve and crossing a gutter at the same time, shewing the groove in the onter circle shallow. / C. / C. / D. / F. / E. / Tio / B. / A.
USPTO scan
The patent as scanned by the USPTO
U.S. Patent and Trademark Office · Google Patents
Show the transcription Hide (484 words)
Machine transcription (LightOnOCR) of the pages as scanned by the USPTO, most of them the handwritten copies made when the records were restored after the 1836 fire. Not checked; it can misread handwriting, so compare it with the scan.
Page 1.
J. Stimpson,
6715X R.R. Rails,
Patented Aug. 23, 1831.

Page 2.
Aug 29 1831 6715x 207
James Thompson
Lecton Patent
The Schedule referred to on the said Patent and making part of the same containing a description in the words of the said James Thompson himself of his improvement on the mode of turning short courses on Rail Roads for which said Patent was granted, dated the twenty third day of August 1831, which said Patent being hereby cancelled on account of a defective specification.
To all whom these presents shall come. Be it known that I, James Thompson of the city and county of Baltimore and state of Maryland have invented a new and useful improvement on the mode of turning short courses upon rail roads with rail road carriages particularly those round the corners of streets or curves, and that the following is a full and exact description of said invention or improvement as invented or improved by me. By, and apply the common peripheries of the flanges of the flanges of the wheels for the aforesaid purpose in the following manner. May a flat rail, which however may be grooved or grooves at the commencement of the curve line and in a position to be controlled under the flanges of the wheels upon the outer track of the circle so that no other part of the wheel which runs upon the outer side of the track rails shall touch or bear upon the rails but the peripheries of the flanges they bearing the wheel against the base and carrying a little the opposite wheel which runs upon the inner track of the circle are to bear and bear upon their tracks in the usual way and their flanges exactly in a groove or channel, which tracks are ordinarily about three inches in diameter less than the peripheries of the flanges. The bearing surfaces of the wheel which are in contact with the rails while thus turning the curve are indicated by straight lines from every point there would thus be formed the junction of two cones (if there be one wheel and two or if there are two carriages) or of but one cone and two wheels there but one cone, which junctions, or the wheels representing their perimeters will of the wheels are thirty inches in diameter and are complete about three feet by inches apart to form a curve of about eighty feet of the inner track rail. The difference in diameter between the flanges and base of the outer, the tracking of the inner wheel and the wheel
Published accounts: journal notice
Notice in the monthly list of patents, with remarks
Journal of the Franklin Institute, new ser., vol. 9 (1832), p. 125 · View the page
39. For an improvement in the mode of Forming and using cast or wrought iron plates, or rails, for Rail-road Carriage Wheels to run upon; James Stimpson, city of Baltimore, Maryland, August 23.
Remarks. The claim in this case is to "the application of cast or wrought iron plates for the use of rail-ways on the streets and wharves of cities, or elsewhere. The objects of said improvement being to employ rails that will not present any obstacles to the ordinary use of streets, or sustain injury therefrom, and so to form the plates at the intersections of streets, or other crossings, that cars will readily pass over them, and also on circles of small radius." The rails are to be formed with a groove in them to receive the flanches of the wheels; on one side of the groove, the width is to be sufficient for the tread of the wheel; on the other, it need not exceed three-quarters of an inch. These rails are to be laid flush with the pavement of the streets. At corners to be turned the rails are to be cast, or made of the proper curvature, one of them only being provided with a groove, as the flanch is to run upon the other, upon the principle described in No. 37. Provision is to be made by scrapers, or brushes, preceding the carriages, to clear the grooves of dust, ice, and other obstructions.
DATAMP: illustration
Illustrations from DATAMP
DATAMP (Directory of American Tool and Machinery Patents), via the Internet Archive · Archived DATAMP page
About this record
- Patentee
- DATAMP
- Date
- the Name and Date index of patents, DATAMP, USPTO records
- Invention
- DATAMP
- Listed in
- the Name and Date index of patents, DATAMP, USPTO records, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- Burke's 1847 Patent Office list gives the same patent.