Drawings and documents
National Archives restored drawings: drawing
William Mix's Patent Drawing for a Mould for Casting Spoons
National Archives, Restored Patent Drawings (Record Group 241) · Full-size scan at the National Archives · Catalog record
Show the text on the drawing Hide (76 words)
Words on the drawing as machine-read by the National Archives; not checked. Useful mainly for searching.
22 METAL FOUNDING / Hurdware. / sot Soft / William Mix / be / CLASSINICATION / Casting Spoons / 9792.1 / terms / patented June 28th 1836. / IIV / 9792X / for air + approximate / churson / the subsigning receivery / the liquid metal proper / upon marri the carting / Anevents sinks or our / ho / References / A.N., spoon mould in two parts / B. orifice for pouring the metal / b.b.b. Excavations for safety spurs or yours. / 22.
USPTO scan
The patent as scanned by the USPTO
U.S. Patent and Trademark Office · Google Patents
Show the transcription Hide (664 words)
Machine transcription (LightOnOCR) of the pages as scanned by the USPTO, most of them the handwritten copies made when the records were restored after the 1836 fire. Not checked; it can misread handwriting, so compare it with the scan.
Page 1.
9792X
W. Mix,
Casting Spoons.
Patented June 28, 1836.

Page 2.
9792X
June 28, 1836
William Allex of Prospect, Connecticut.
Letters Patent
The Schedule referred to in these Letters Patent and making part of the same containing a description in the words of the said William Allex himself of his "Improvement in the method of casting spoons":
To whom it may concern:
Be it known that I, William Allex of Prospect in the County of New Haven and State of Connecticut, have invented made and applied to use a new & useful improvement in the method of casting spoons of Britannia, Black tin or other suitable metal for cast spoons, which improvement consists in the peculiar construction of the mould for casting them, which I call "Allex's improved Spoon Mould", and I specify my improvement as follows. The mould like those heretofore used may be made of cast iron of Brass, or of Composition metal in two parts leaving the impression for the spoon between them when put together in the usual manner and my improvement consists in enlarging the orifice for the spout or place for pouring in the metal, so as to extend it about one inch along the upper edge of the bowl of the spoon as it lies in the mouth & about the thickness of the bowl where it joins it, but thicker as it rises instead of the narrow but thick orifice heretofore in use which is usually about one quarter of an inch in diameter at its junction with the spoon & also my improvement consists further in making one or more, usually, three excavations for safety spurs rising in the sides of the mould, above the bed of the spoon, to let off the air and to receive spurs or spurs of metal along the bowl & handle of the spoon which by its weight as the metal settles in the mould by cooling, retain the sink, and will prevent air bubbles or sinks in the casting & produce a perfect spoon in the mould. These spurs or spurs are thin where they join the spoon & thicker above
Page 3.
June 28, 1836
are easily broken off. The excavations for these spurs may be made to contain from a quarter to half an ounce of metal more or less according to the size of the mould casting. The effect of this improvement is that the metal enters the mould with a wider spread than usual which prevents the roughness so common near the spurs in casting & the safety spurs or spines receiving a mass of the liquid metal, which rises in them & presses upon the casting; prevents sinks and air holes in it which often mar or spoil it. Moulds for all size of large or small spoons are made in the same principle & in the same manner. This mould, as all others should be, is highly polished, where the spoon is cast & needs no coating but simply brushing, to ensure perfect castings, which require only burnishing or buffing.
For further illustration reference may be had to the model & drawings of my improvement deposited in the Patent Office.
I claim as my invention & improvement only the enlargement & form of the entrance spurs or orifices for pouring in the metal in the manner as above described, & also the safety spurs or rising excavations for the false spurs as above described & for these improvements only I solicit Letters Patent.
In testimony that the above & foregoing contains a full & exact description of my said improvement I hereunto subscribe my name this 27th day of February, 1836.
Witnesses
Eldon Baldwin
M. R. Baldwin
William Mix
of SD
(Patented 28th June 1836)
Published accounts: journal notice
Notice in the monthly list of patents
Journal of the Franklin Institute, new ser., vol. 18 (1836), p. 287 · View the page
492. Spoons, casting. William Mix, Prospect, Conn.
About this record
- Patentee
- the Journal of the Franklin Institute, Journal
- Date
- the Name and Date index of patents, USPTO records, Jim Shaw's X-patent list
- Invention
- the Name and Date index of patents
- Listed in
- the Name and Date index of patents, USPTO records, Jim Shaw's X-patent list, the Journal of the Franklin Institute, Burke's List of Patents (1847)
- The patentee's full name comes from the Franklin Institute's journal.
- Burke's 1847 Patent Office list gives the same patent.