X9870: Journal notice (Published accounts)
567. Water wheel. Samuel Garrett, Londonville, Ohio.
567. Water wheel. Samuel Garrett, Londonville, Ohio.
566. Gun and pistol lock.-Johnson Marsh, East Dorset, Vt.
564. Chimneys, ovens, &c.-Elisha Smith, Ithaca, N. Y.
563. Fire place. Reuben Buck, Acton, Maine,
562. Saddles, ladies'.-William Jenkins, Ithaca, N. Y.
561. Awl haft. - William Campbell, Gilsum, Ν. Η.
560. Plough.-John M. Tilford, Murfreesborough, Tenn.
558. Mowing machine. William Greenleaf, Andover, Maine,
557. Cooking stove.-Elish N. Pratt, Albany, N. Y.
556. Truss for hernia. Isaac Thompson, Brattleborough, Vt.
555. Force pump, double.-John G. White, Dryden, N. Y.
554. Saws, straining.-E. Rathburn and W. Tinker, Conneaut, Ohio,
553. Distilling.-A. R. Ken and H. Hoover, Waynesborough, Penn.
552. Cooking stoves.-E. Andrews and S. Austin, Bradford, N. H.
551. Mattresses, bolsters, &c.-A. Salisbury, and J. Uram, Troy, N. Y.
550. Tailoring, art of. James Wesler, Jr. Hagerstown, Md.
549. Andiron bars.-James Cochran, Batavia, N. Y.
548. Mill for grain, &c.-Oliver Wyman, Watertown, Mass.
547. Locks for doors, &c.-Almon Roff, N. Y.
546. Frieze window, &c.-William Wooley, N. Y.
597. Neck stocks, shaping.-Thomas Goodman, N. Y.
544. Trunks, valisses, &c.-William Brown, Brooklyn, N. Y.
543. Woolen Yarn.-William B. Walker, Hillsborough Bridge, N. H.
542. Shingle machine. Tunis T. Burhyte, Barton, N. Y. 1.
541. Saddle.-Otho W. S. Callahan, Staunton, Va.
540. Spirits of turpentine, extracting. Isaiah Jennings, N. Y.
539. Traveling trunks. Washington Sweetzer, Portsmouth, N. H.
It is too late to claim the introduction of India rubber into braces, &c. &c., in the broad way in which it is claimed above, as it has been repeatedly used in webbing, and in other forms, for some of the purposes named. As regards several of these, we apprehend that its successful employment will baffle the skill of the patentee, although we should be glad to think otherwise. (TO BE CONTINUED IN OUR NEXT.) NOTE. We have not noticed one half of the patents for the month of March, the whole number being 133; the remainder will be given in our next; this, we are aware, will throw us another month in arrear with our notices, which we intend shall usually follow six months after that in which the patents are dated. The diminished number issued immediately after the passing of the new law, will enable us to overtake the business, without giving an undue length to the article containing our animadversions, as would have been the case had we included the whole for the month of March, in the present number. SPECIFICATIONS OF AMERICAN PATENTS. Specification of a patent for an improved Boiler for generating steam. Granted to JOHN AMES, Springfield, Hampden county, Massachusetts, March 12th, 1836.
Remarks. To all whom it may concern, be it known, that I, John Ames, of Springfield, in the county of Hampden, and state of Massachusetts, have invented an improved boiler for the generating of steam, to be used in the drying of paper, and for other purposes, and do hereby declare that the following is a full and exact description thereof. As this boiler is not intended to be used for steam of great elasticity, but is designed mainly, to produce it in large quantity, I intend, usually, to make it of cast-iron, although wrought-iron, or other metal, may be used if preferred. It may be made of various sizes, and in different shapes, *28 but for the sake of description, I will give the dimensions of one which I have tried, and found to answer well. It consists of a box four feet square, and two feet deep, the two sides being open, but furnished with flanches for the purpose of bolting on the two plates which are to form the two sides of the stove. Tubes, forming flues, in the manner of the boilers now in general use for locomotive engines, are to pass through these side plates. In the one alluded to, the plates are cast with six rows of holes, nine in each, and about two inches in diameter. The upper row of tubes must be sufficiently below the water line to insure their being constantly covered; and above the water there must, of course, be sufficient space to form a steam chamber, or reservoir. When this boiler is set, the draught from the fire place below it passes through two rows of the tubes, is returned through the next two, and finally through the upper rows. The manner of forming the flue by divisions, extending from the brick work to the sides of the boiler, between the respective pairs of rows will be readily understood by reference to the drawing which accompanies this specification. Fig. 1. ○○○○ OCOCO ㅇㅇ L K J 2 I B B ○○○○ OBOBOㅇㅇ D H ○○○○ OBOBOㅇㅇ G O OAOAO O O Ο Ο OAOAO F Fig. 1. is a side view of the boiler A A, B B, and C C, being the open ends of the tubes through which the heated air from the furnace is to pass, as will be shown more distinctly in fig. 2. D, is one of the ledges or partitions which project out from the boiler, occupying the space between it and the masonry in which the boiler is set, and causing the draught to enter the tubes A A, in order to its returning through those marked B B. Fig. 2, is a vertical section of the boiler and furnace, cutting the boiler from front to back. A A, B B, and CC, are the double ranges of tubes, Formation of Organic Compounds. as in fig. 1, represented by dotted lines. D and E, are partitions which direct the draught through the tubes in the following manner. Let. F represent the furnace, and C a part of the flue into which the tubes A A, open, the draught being arrested by the partition D, will pass through A A, into the flue H, and being arrested by the partition E, will return through the tubes B B, then pass those marked C C, into the flue I, leading into a smoke pipe, or chimney; J, may represent the water line, K, the steam chamber, and L, the steam pipe. Although I have mentioned a certain number of tubes, and have said that in the boiler which I have tried, the heated air is made to pass through the water three several times, it is manifest that the same operation may be repeated as frequently as it shall be found advantageous so to do. The number of tubes also, may be varied, and they may be placed in single rows, or otherwise, without altering the principle of action. I have not mentioned the safety valves, cocks, or other general appendages to steam boilers, as in these I do not profess to have made any improvement; nor have I described any particular manner of securing the tubes, this being well known to engineers. A boiler thus made, is recommended by its simplicity and economy, where it is desirable to generate a large quantity of steam under a moderate pressure, as for the purposes of heating and drying in various manufacturing processes. What I claim as my
60. For the use of Gum Elastic in Corsets, Braces, &c.; Ransom Warner, city of New York, March 18.
Remarks. "I claim as my own invention, the application and introduction of gum elastic into the braces for the shoulders; for corsets; for men's and women's apparel; for suspenders; for the curved and distorted spine; for retaining the fracture of the collar bone in its place; and the applying of the gum elastic to the human system to supply artificial muscular power, so as to meet the antagonist muscle, or to supply strength to the weakened fellow muscles, in proportion to the necessity of the case, or as the contractile power may be required."
59. For a Detacher, for detaching horses from carriages, &c.; Philip T. Share, city of Baltimore, March 18.
Remarks. Numerous patents have been obtained, both here and in Europe, for detaching horses from carriages, in case of their running away; and many of them are sufficiently simple and efficient, but they have not been kept in use, nor are they likely to be so. We have no fault to find with the contrivance before us, nor any praise to bestow upon it, as it does no appear to be either better or worse than several of its predecessors. Sailors are proverbially averse to cork jackets, and other life-preservers, and other classes act, more or less, from the same kind of impulse; there is a feeling adverse to the constantly guarding against evils which are contingent, and are believed to be remote. Where by one act, like insuring against fire, the precaution is in its nature durable, prudent men will resort to it, but, otherwise, rarely. The contrivance which has become our text, will soon be forgotten, and be succeeded by analogous inventions, destined to share the same fate.
58. For a Machine for making Butts and Hinges; Welcome Whitaker, Troy, New York, March 12.
Remarks. We can afford but little more than the claims preferred by the patentee of this machine, which is intended to bend sheet metal round the joint wire, so as to form the knuckles of hinges. The description, which occupies several sheets of paper, might have been abridged by making duplicate drawings, and referring to them by letters, or figures, and whilst it would have lost in length, it would have gained in distinctness. The drawing is a well executed perspective, but showing only one view of the machine. The claims are to "the manner and principle of placing, holding, and supporting the wire round which the tongues of butts, or hinges, are to be bent and formed into eyes, together with the manner of securing the hinge for that operation. The manner and principle of bending the tongue round the wire, either by allowing the ends of the dogs to slide upon their surface, or by causing them to roll and not slide. And also the above described machine, and every part of it, together with the manner, and principle of its construction and operation, as therein combined, and as constituting a whole, and as specially applied to the purposes of bending the tongues of the butts and hinges, and forming them into eyes."
57. For an improved Steam Boiler for generating Steam, to be used in the drying of paper; John Ames, Springfield, Hampden county, Massachusetts, March 12.
Remarks. See specification.
56. For Forge Backs for Blacksmiths; Charles Richardson, Greenfield, Hillsborough county, New Hampshire, March 12.
Remarks. There have been numerous patents for hollow, cast-iron, forge backs, many of them marked by very slight differences. We do not, in the one before us, see any thing worthy of particular notice. The patentee claims a "spiral plate of cast-iron, and the peculiar form and size of the swelled front, or convex part in the front part of the box." The spiral plate is a partition to cause the admitted air to circulate, and to become heated prior to its exit.
We have now a similar instrument in our possession, and have seen many others. A good forceps, or key, correct judgment, a firm grip, and a strong wrist, require no patent, nor any improvement. 55. For Drying paper by the application of Dry Heat; Henry P. Howe, Shirley, Middlesex county, Massachusetts, March 12.
Remarks. In the manufactories where cylinder paper is made, the sheet is dried by means of large, iron cylinders, into which steam is admitted through a hollow gudgeon; but the present patentee places a furnace within his cylinder, instead of using steam. We are by no means convinced, however, that the plan which he proposes is a real improvement, although we cannot offer any decided opinion on the subject, as the construction and management of the furnace, and some other points, are obscurely presented, and there is not any thing claimed.
54. For a Compound Lever Tooth Extractor; Moses P. Hanson, Bangor, Penobscot county, Maine, March 12.
Remarks. This instrument is the same in principle with others which have been made for the same purpose. The tooth is to be seized by forceps, and to be drawn by causing a part of the instrument to rest upon the adjoining teeth, or gums, to operate as a fulcrum in drawing the tooth. Many teeth could not be drawn by means of such an instrument, and it is always objectionable, as the teeth upon which the fulcrum rests must be forced in with a power equal to that required for extracting the one to be drawn.
53. For a Cotton Baling Press; James C. Mitchell, Madison county, Mississippi, March 12.
Remarks. In this press there are two followers, which, in pressing, are made to approach each other, by two shafts, each having a right handed screw cut on one end, and a left handed screw upon the other. The screws stand vertically, their upper ends revolving in collars in the cap of the press, and having spur wheels upon them above the cap. Their lower ends work in steps in the side of the press. The two followers have nuts let into them adapted to the screws. As this press is intended for baling cotton, there is a portion of each screw shaft, in the middle, which is left square, for nearly the thickness of a bale. A large spur wheel, on a vertical axis, turned by horse, or other, power, mashes into the wheels on the upper ends of the screw shafts, the right and left handed screws then cause the followers to approach, or recede, according to the direction in which they are turned. The dimensions of the respective parts, and the appendages necessary for the packing of cotton, are sufficiently described in the specification. The construction of the press, with the exception of the wheels for working it, is claimed as entirely new.
52. For an improvement in Capstans for Ships or other vessels; Andrew Morse, Jr., Boston, Suffolk county, Massachusetts, March 12.
Remarks. The main body of this capstan revolves upon a hollow shaft firmly fixed in the deck of the vessel, and is turned by handspikes, in the usual way. It has a cap fixed upon a stout iron shaft, which iron shaft passes through the hollow shaft first mentioned, and extends to the lower side of the deck, and there carries a spur wheel, which mashes into another spur wheel upon a second shaft which passes up through the deck. The upper end of this second shaft has also a small spur wheel upon it, which mashes into a large wheel surrounding, and firmly fixed to, the lower end of the capstan. The small spur wheel upon the second shaft may be thrown out of gear at pleasure. The usual palls, to prevent back motion are, of course, employed. When the small spur wheel is thrown out of gear, and the windlasses are made to turn the main body of the capstan, it operates without any aid from the gearing; but when the small wheel is in gear, and the handspikes are applied to the cap, the power is increased in a degree dependent upon the proportionate sizes of the train of wheels. "The invention here claimed, and desired to be secured by letters patent, is the improvement of the ships' or vessels' capstan, so that increased power may be obtained at pleasure, as above described; with the arrangement, application, and adaptation of the several parts as herein set forth." At page 394, Vol. xvi., a capstan is described, which operates upon the same principle with the foregoing, although not under precisely the same arrangement; this was patented in May, 1835. One very similar was patented in England, in February, 1827, see Newton's Journal, 2nd series, vol. ii, p. 66. Another still more like in arrangement, and precisely similar in effect, was patented by Capt. Phillips, in England, in 1819, see Newton's Journal, vol. ii, p. 1. Other examples might be offered, but these, it is supposed, will suffice. We are aware that the patentee may point out variations from these, which he may deem important; but we cannot perceive any substantial difference between his plan and that of Capt. Phillips, or any change which might not have been made by an ordinary workman who had no claim to inventive talent.
4 51. For an improvement in Piano Fortes; Henry Hartge, city of Baltimore, March 12.
Remarks. The improvement here claimed, consists in making the tuning block of a piano forte, in part of wood, and in part of iron, in a way which we believe to be new. The wooden tuning block may be covered with an iron plate three-eighths of an inch in thickness, and the holes for the tuning pins be bored through the iron, and into the wood. The iron plate prevents the pins from being drawn out of perpendicular by the tension of the strings, whilst the pin has the advantage of being kept from turning by the elasticity of the wood. The claim is to "the metallic plate fastened to the tuning block, with holes for the tuning pins to pass through, furnishing additional security and permanency to such pins, and giving increased firmness to the tuning block, thereby aiding to keep the instrument in tune." We have no doubt of the goodness of this contrivance, or of its superiority to the devices which have preceded it in instruments where frames in part, or wholly, of iron, have been used to sustain the tension of the strings.
50. For Machinery for making Cap Wire; Melville Kelsey, city of New York, March 12.
Remarks. The claim made in this machine is to "the principle of using two, or more, bobbins at the same time, upon the same spindles, thereby turning off the work much faster." The wire passes through a hollow mandrel, or spindle, upon one end of which are the bobbins and flyers. The description of the machine is not by any means clear, nor is the drawing a very descriptive one, but still, we believe, that by a competent workman, the machine might be made with their aid.
28 49. For a Cast-iron Fire place; William Burgess, Middleborough, Plymouth county, Massachusetts, March 12.
Remarks. An open, cast-iron, fire place is to have two, or more, ovens, at the back of it. The fire place must project out into the room, as the openings into the oven are at each end. There are also to be openings between, and at the back of the ovens, forming flues around which the heated air may pass. The claim is to "the application of the oven and cooking apparatus, to the common open fire place, or frame, as above described." The contrivance here claimed, resembles many others, and is not distinguished from them by any thing presented in the specification.
48. For a Cheap Lock; Abel Conant, Lowell, Middlesex county. Massachusetts, March 12.
Remarks. It so happens that this lock is not a lock, but merely a spring bolt, not a word being said about a key, or any contrivance for securing the bolt. The parts which are individually described, are, when put into their proper places, to form a mortise bolt, or fastening. The back part of the bolt, which occupies the interior of the box, is a quadrangular frame, which is forced back by means of a dog, or cam, in the usual way. A zigzag spring placed within the bolt, and bearing against the case of the tumbler and the front end of the hollow bolt, forces it forward. There are four individual claims, some of which, we apprehend, will not be sustainable. The first is to the cheap construction, which, as a result, may be very good, but as a claim is somewhat equivocal; the second, is to the transferring of a large portion of the champfer of the bolt to the catch, thus allowing the bolt to be reduced in thickness-which must certainly abridge the distance to which the bolt will throw out, and produce some inconvenience. The third is to the application of the zigzag spring within the hollow of the bolt, and the fourth, "to the use of cast, or wrought iron, knobs, or handles, in place of glass, wood, brass, or other metal." In this last particular, there is neither invention, nor discovery, but a mere change of materials; the validity of which, as a foundation of a claim, we must doubt. VOL. XVIII.-No. 5. -NOVEMBER, 1836.
47. For a Cooking Stove; John Liddle, Schoharie, county of Schoharie, New York, March 12.
Remarks. A furnace is to be surrounded by a rectangular chamber, furnished with doors, and intended either for baking, or boiling, having openings in its lower side, over the fire, to receive boilers; when used for baking, these openings are to be closed by a cast-iron slide. Each end of this chamber forms a flat flue, communicating with flues surrounding an oven which surmounts the chamber first named. As we are left to discover the novelties in this contrivance, by the entire omission of a claim, we shall transfer the task to the reader.
46. For a Mantle and Fender for fire places; Elijah Skinner, Sandwich, Stafford county, New Hampshire. First patented April 19th, 1822.
44. For a Reaction water wheel; Abraham Straub, Milton, Northumberland county, Pennsylvania, March 12.
Remarks. This reaction wheel is to be in the form of a drum, or cylinder, like Wing's, and many others; but it is to have only two buckets, or floats, and two points of discharge; each bucket is to exceed a half circle, to allow their lapping over at the discharge orifices. The great point upon which the patentee depends, is the peculiar kind of curves which he gives to his two buckets, "the nature of which is such an involute as that its distance from its centre shall increase regularly and continually, thereby affording an uninterrupted discharge to the water, without any resistance being offered from the imperfections of shape found in those methods heretofore used." These involutes, or buckets, differ but little from segments of circles, and notwithstanding the applied mathematics of the patentee, we are fully convinced that were he to make his own wheel, and another in all respects similar, but with the buckets segments of circles, he would never, from their effects, discover the difference between the two. Every practical man knows to what a short distance theory will conduct him as a sure guide in hydraulic undertakings. We do not think it necessary to give the patentee's mode of describing his curve. 45. For a Bed-bug destroyer; Brittain Garrard, Maysville, Blount county, Tennessee. Although three or four patents have been obtained for scalding bugs to death by steam, and although the kind of thing used for the purpose was well known prior to the obtaining of the first patent, it seems that there are yet some which have escaped destruction. The present patentee makes some change in the arrangement of his steam kettle, or boiler, rendering it somewhat more complex, but we do not think more convenient, than heretofore. We shall not describe, as the patentee has not claimed, the alterations, or improvements, made in "the family safety scalding pot and steam engine."
43. For a Forcing pump; William W. Lesuer, Venice, Cayuga county, New York, March 12.
Remarks. This is a double, cylinder pump, arranged very much in the manner of the double pumps of an ordinary fire engine, with the disadvantage, however, of changing the direction of the water as frequently, and as abruptly as could well be done. A tube, or pipe, is to descend from the bottom of the box containing the cylinders, into the well, or other source of supply. A claim is made to "the tube on the under side of the box, as applied to this machine; the form of the box and the manner in which it is connected with the cylinders, and tube on the bottom of the box."
42. For a Washing machine; Albion P. Arnold, Readfield, Kennebec county, Maine, March 12.
Remarks. A double headed beater is made to vibrate in a trough in just the same way as in many other washing machines; and after giving the exact measures of the individual parts, the patentee claims "the fluted ends of the chest, the covering, the iron shaft and boxes, the steel spring and the lever on which it acts," to which might have been added "the washerwoman," if not previously claimed.
41. For a Steam boiler; Job Carr, Springborough, Warren county, Ohio, March 12.
Remarks. This boiler is intended to "generate a sufficient quantity of steam for propelling any kind of machinery, without any danger of bursting or collapsing." And a claim is made to the construction of the reservoir and furnaces, or improved steam generator, and agreement of the combined parts." What is meant by the agreement of the combined parts, we cannot tell, as we find nothing new in the whole affair, either individually, or collectively. The only provision to prevent bursting is staybolting through the boiler, and banding it with iron on the outside. The boiler itself is to be wagon-shaped, and the furnaces are to be within it. We collect from the description, that in order to generate steam enough, there must be fire enough, and water enough, but more than this we cannot discover.
40. For the Application of latent heat to cooking, &c.; Peter Wenn, an alien, who has declared his intention to become a citizen of the United States. Philadelphia, March 8.
Remarks. It is a little surprising that a patent should be obtained for a contrivance so manifestly useless in an economical point of view, as it is scarcely to be expected that any number of persons would purchase what few would receive as a gift, on the condition that they should use it. Passing over the false philosophy of boiling, &c. by latent heat, we proceed to state that the apparatus consists of a tin case, into the lower part of which quick lime is to be put, and upon this cold water is to be allowed to run, when, by the slacking of the lime, a sufficient degree of heat is to be disengaged to boil, stew, &c. &c. The claim is to boil water, to bake, heat, cook, and to dry substances by means of latent heat, evolved in the before described apparatus, without the aid of fire, flame, or radiant heat; and the manner in which the apparatus is to be used as aforesaid." As a mere article of curiosity the thing was well enough, though scarcely fit for a "nine days' wonder." The idea of laying in quick lime enough for fuel, of discharging and vending the slacked lime, with all their concomitants, is one which no person, possessing judgment upon the subject, would entertain for a moment; and we dare aver that the patentee would not continue to use his own apparatus in his family, were the lime sent to him gratis.
39. For a Brick making machine; John Moffet, Buffaloe, Erie county, Pennsylvania, March 8.
Remarks. In this machine the bricks are to be pressed into moulds by the passing over them a loaded car, or carriage, beneath which is a pressing roller, extending the length of the brick. The moulds are placed side by side, in any required number, so as to form a long trough of cells. Parallel to this celled trough, a second is placed at a suitable distance from it, and semicircular platforms are made at each end, so that the whole may form a continuous railway, admitting of the car to pass round and round. The moulds are to be filled with tempered clay, and the loaded car passed over them, which fills them and smooths the upper surface of the brick. The bottom of each mould is capable of being raised up so as to deliver the brick; and to effect this, from each of these bottoms the end of a lever projects, which is acted upon by a lifter on the hind wheel of the pressing car, in a way described in the specification. The claim is to "the adaptation of the car and rail road to the manufacture of bricks, as set forth; and to the manner of raising the bricks out of the moulds."
38. For an improvement in the method of Making Mould Candles; Jefferson Dunlap, Village of New Holland, Lancaster county, Pennsylvania, March 8.
Remarks. This is an apparatus for passing the wicks into the moulds, giving them the proper twist, and drawing the candles simultaneously from the moulds. The machine appears to be well adapted to the purpose, but would require more than a verbal description. The whole arrangement is claimed.